Built for paired low-pressure hose service where mounting space is limited, the Coxreels C-LPL-135-135 Dual Purpose Spring Rewind Hose Reel combines two spring-driven reel sections on one shared C Series base. This model is configured less hose and supports two customer-supplied 1/4" I.D. hoses with up to 35 ft hose capacity each and a 300 PSI maximum pressure rating, making it useful for applications where two air, water, or oil lines need to be stored and deployed from one compact reel assembly. The C-LPL-135-135 is designed for dual-source service points where two retractable hose lines are needed but separate reel installations would take up extra space. Each reel section operates independently, allowing the operator to pull out one or both hoses as the task requires. Because this model is supplied without hose, buyers can select compatible hose assemblies separately to match the required media, hose material, fittings, connection layout, and facility standards.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Dual Purpose Spring Rewind Hose Reel | Series: C Series | Configuration: Less Hose | Pressure Class: Low Pressure | Hose Quantity: 2 Hoses | Hose I.D.: 1/4" | Maximum Hose O.D.: 1/2" | Hose Capacity: 35 ft Each | Max Pressure: 300 PSI | Inlet: 1/4" FNPT | Service: Air, Water, Oil | Overall Dimensions: 10-1/2" W x 18-5/8" H x 17" L | Base Dimensions: 8" x 9" | Mounting Pattern: 7" x 8"
Features:
- Combination reel design places two spring rewind hose reel sections on one compact mounting base.
- Less-hose configuration allows the buyer to install two compatible 1/4" hose assemblies separately for the intended air, water, or oil service.
- 35 ft capacity per reel section provides more working reach than shorter 25 ft configurations while keeping the assembly compact.
- Independent spring rewind operation lets each hose retract after use, helping reduce loose hose around benches, bays, service carts, and equipment areas.
- Single shared base simplifies installation compared with mounting two separate hose reels.
- Two machined solid brass 90° full-flow NPT swivel inlets support separate fluid paths through each reel section.
- Nitrile swivel seals are used for the listed low-pressure service applications.
- Heavy gauge steel base and support post provide a stable foundation for the two-reel assembly.
Made in USA: 
Applications:
- Maintenance benches and work cells where two low-pressure hose lines are needed from one compact reel assembly.
- Automotive, fleet, and equipment service areas using paired air, water, or oil lines near lifts, bays, or utility points.
- Manufacturing plants and industrial facilities that need two retractable service hoses at one workstation or equipment service area.
- Mobile service trucks and maintenance trailers where conserving mounting space is important.
- Shop and facility layouts where customer-supplied hose assemblies are preferred for standardization or media compatibility.
FAQs:
- Q: What does “less hose” mean on the Coxreels C-LPL-135-135?
A: It means the reel is supplied without hose installed. The buyer must provide two compatible hose assemblies separately, staying within the listed 1/4" I.D., 1/2" maximum O.D., 35 ft capacity each, and 300 PSI pressure rating. - Q: What does “dual purpose” mean on this C Series reel?
A: It means the reel combines two hose reel sections into one compact assembly, allowing two hose lines to be stored and used from a single mounting location. - Q: Can the two hoses be pulled out separately?
A: Yes. Each reel section has its own spring rewind action, so the operator can deploy one hose or both hoses depending on the job and system setup. - Q: What fluids can this reel handle?
A: This low-pressure less-hose configuration is listed for air, water, and oil service. The selected hoses, fittings, and seals should be checked for compatibility with the exact media, pressure, and temperature conditions. - Q: How is C-LPL-135-135 different from C-LP-135-135?
A: C-LPL-135-135 is the less-hose version and does not include hose. C-LP-135-135 is the corresponding hose-included model in the same C Series configuration.
Available Variations and Specifications
| SKU | I.D. | O.D. | FT. | PSI | APRX. LBS. | LESS HOSE SKU | APRX. LBS. | SIZE INDEX |
|---|---|---|---|---|---|---|---|---|
| LOW PRESSURE | ||||||||
| C-LP-125-125 | 1/4" | 1/2" | 25 | 300 | 66 | C-LPL-125-125 | 60 | 1 |
| C-LP-135-135 | 1/4" | 1/2" | 35 | 300 | 67 | C-LPL-135-135 | 60 | 1 |
| C-LP-150-150 | 1/4" | 1/2" | 50 | 300 | 74 | C-LPL-150-150 | 64 | 1 |
| C-LP-325-325 | 3/8" | 5/8" | 25 | 300 | 67 | C-LPL-325-325 | 60 | 2 |
| C-LP-335-335 | 3/8" | 5/8" | 35 | 300 | 69 | C-LPL-335-335 | 60 | 2 |
| C-LP-350-350 | 3/8" | 5/8" | 50 | 300 | 78 | C-LPL-350-350 | 64 | 2 |
| C-LP-425-425 | 1/2" | 3/4" | 25 | 300 | 70 | C-LPL-425-425 | 60 | 2 |
| MEDIUM PRESSURE | ||||||||
| C-MP-325-325 | 3/8" | 11/16" | 25 | 3,000 | 80 | C-MPL-325-325 | 66 | 2 |
| C-MP-335-335 | 3/8" | 11/16" | 35 | 3,000 | 86 | C-MPL-335-335 | 68 | 2 |
| C-MP-425-425 | 1/2" | 13/16" | 25 | 2,500 | 78 | C-MPL-425-425 | 64 | 2 |
| C-MP-430-430 | 1/2" | 13/16" | 30 | 2,500 | 84 | C-MPL-430-430 | 66 | 2 |
| HIGH PRESSURE | ||||||||
| C-HP-125-125 | 1/4" | 9/16" | 25 | 5,000 | 78 | C-HPL-125-125 | 66 | 3 |
| C-HP-135-135 | 1/4" | 9/16" | 35 | 5,000 | 84 | C-HPL-135-135 | 68 | 3 |
| C-HP-325-325 | 3/8" | 11/16" | 25 | 4,000 | 78 | C-HPL-325-325 | 64 | 3 |
| C-HP-330-330 | 3/8" | 11/16" | 30 | 4,000 | 82 | C-HPL-330-330 | 66 | 3 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
