For repetitive assembly operations that require controlled tightening where surrounding components can limit straight tool access, the Ingersoll Rand QA1L12S4SD Angle Air Nutrunner combines 1,270 RPM free speed with a 3.5 to 32.2 in-lb torque range and an adjustable shut-off clutch. The angle configuration supports fastener access in compact assembly layouts, while the shut-off clutch automatically stops the tool at the preset torque point to help reduce overtightening and support repeatable fastening results.
The Ingersoll Rand QA1L12S4SD provides a useful balance between rundown speed and torque capability for compatible production joints. Its 1,270 RPM speed offers a more controlled rundown rate than faster QA1L18 configurations, while the higher 32.2 in-lb maximum torque expands its capability for applications requiring additional turning force. Properly setting the adjustable clutch on the actual production joint allows the tool to combine accessible angle-head positioning with controlled automatic shut-off.
Type: Angle Air Nutrunner | Model: QA1L12S4SD | Configuration: Angle | Free Speed: 1,270 RPM | Torque Range: 3.5 - 32.2 in-lbs | Clutch Type: Adjustable Shut-Off
|
Features:
Made in USA: |
 |
Applications:
- Automotive component assembly — tightening compatible fasteners positioned around brackets, housings, fixtures, and adjacent production components.
- Appliance manufacturing — completing controlled fastening inside frames and internal assemblies where straight tool clearance is limited.
- Electrical and electromechanical equipment production — accessing fastening points within cabinets, equipment assemblies, and compact component arrangements.
- General manufacturing — performing repetitive fastening where angle access, adjustable torque, and automatic shut-off support process control.
- Fixture-based production stations — reaching side-oriented or recessed fasteners while maintaining controlled tightening within the specified torque range.
FAQs:
- Q: What torque range does the Ingersoll Rand QA1L12S4SD provide?
A: The specified torque range is 3.5 to 32.2 in-lbs. Establish the appropriate clutch setting on the actual production joint based on the fastener, joint characteristics, component materials, and assembly requirements. - Q: What is the benefit of the 1,270 RPM configuration?
A: The 1,270 RPM speed provides a balance between productive fastener rundown and controlled tightening. Compared with the supplied 1,750 RPM QA1L18 configurations, this model operates more slowly while providing a higher maximum specified torque. - Q: How does the adjustable shut-off clutch help improve assembly consistency?
A: Once properly adjusted, the clutch automatically stops the tool when its preset torque point is reached. This provides a controlled cycle endpoint and reduces reliance on the operator to manually stop each fastening operation. - Q: When should an angle air nutrunner be selected instead of an inline tool?
A: An angle configuration is useful when surrounding components, fixtures, housings, or other obstructions make it difficult to align a straight tool with the fastener. - Q: Should completed fasteners still be checked when using automatic shut-off?
A: Yes. Joint characteristics, fastener condition, component materials, drive fit, and compressed-air conditions can affect final results. Set the tool on the actual production joint and verify completed fasteners according to the required quality-control procedure.
Available Variations and Specifications
| Model | Torque Range 1 in-lbs (Nm) |
Torque Range 2 in-lbs (Nm) |
Torque Range 3 in-lbs (Nm) |
RPM | Weight lbs (kg) |
Length in (mm) |
Head Height in (mm) |
Side to Center in (mm) |
Drive in |
|---|---|---|---|---|---|---|---|---|---|
| Lever Start | |||||||||
| QA1L18S4SD | 3.5–11.5 (0.4–1.3) | 9.3–26.1 (1.05–2.95) | — | 1,750 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L18S1LD | 3.5–11.5 (0.4–1.3) | 9.3–26.1 (1.05–2.95) | — | 1,750 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S4LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S4SD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L12S1LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S9LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L08S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L08S6LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L08S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S4SD | 3.5–11.5 (0.4–1.3) | 9.3–36.0 (1.05–4.07) | — | 500 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L05S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (0.9) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S6LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (0.9) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L05S6XLD | 11.7–38.2 (1.32–4.32) | 31.0–88.3 (3.5–9.98) | — | 500 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L05S9LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S1XLD | 11.7–38.2 (1.32–4.32) | 31.0–88.3 (3.5–9.98) | — | 500 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 250 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 250 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S6XLD | 11.7–38.2 (1.32–4.32) | 31.0–101.5 (3.50–11.5) | — | 250 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L02S1XLD | 11.7–38.2 (1.32–4.32) | 31.0–101.5 (3.50–11.5) | — | 250 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 1/4" |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the proper Ingersoll Rand Nutrunners for your assembly application, please email info@intlairtool.com or call (800) 608-5210
- Type
- Nutrunner
- Actuation
- Lever Start
- Torque Range (in-lbs)
- 3.5 - 32.2
- RPM
- 1,270
- Side to Center (in.)
- 0.38
- Drive Size (in.)
- 1/4
- Sound Level (dbA)
- 75
- Air Inlet
- 1/4" NPT
- Air Consumption (CFM)
- 16
- Drive Type
- Square Drive
- Angle Head Height (in.)
- 1.1
- Hose Size (in.)
- 1/4
This product hasn't received any reviews yet. Be the first to review this product!