null Skip to main content
Ingersoll Rand QA1L05S1LD Angle Air Nutrunner | 500 RPM | 3.5 - 56.4 (in-lbs) Torque Range | Adjustable Shut-Off Clutch

Product images may not be an exact representation of the actual product. Please check the description below for technical specifications.

Ingersoll Rand

Ingersoll Rand QA1L05S1LD Angle Air Nutrunner | 500 RPM | 3.5 - 56.4 (in-lbs) Torque Range | Adjustable Shut-Off Clutch

List Price: $2,722.00
$2,071.08
(You save $650.92 )
Availability:
Available To Order From Supplier
SKU:
QA1L05S1LD
Shipping:
Calculated at Checkout
Weight:
2.62 LBS
Condition:
New
Adding to cart… The item has been added
Description

For repetitive assembly work that requires increased torque capability and access to fasteners in compact equipment layouts, the Ingersoll Rand QA1L05S1LD Angle Air Nutrunner combines 500 RPM free speed with a 3.5 to 56.4 in-lb torque range and an adjustable shut-off clutch. Its angle configuration helps operators reach fastening points where nearby components or fixtures interfere with straight-line tool positioning, while automatic clutch shut-off provides a controlled endpoint for each tightening cycle.

The Ingersoll Rand QA1L05S1LD delivers a deliberate 500 RPM rundown speed with adjustable torque capability up to 56.4 in-lbs. This combination is suited to compatible production joints where additional turning force and controlled tightening take priority over maximum fastener installation speed. Once properly adjusted on the actual joint, the shut-off clutch automatically stops the tool at the preset torque point to support repeatable fastening across ongoing production cycles.

Type: Angle Air Nutrunner | Model: QA1L05S1LD | Configuration: Angle | Free Speed: 500 RPM | Torque Range: 3.5 - 56.4 in-lbs | Clutch Type: Adjustable Shut-Off

Features:

  • Adjustable shut-off clutch automatically stops the fastening cycle when the preset torque point is reached.
  • 500 RPM free speed provides deliberate fastener rundown for compatible assembly applications requiring controlled tightening.
  • 3.5 to 56.4 in-lb torque range provides adjustable output for a range of compatible production fastening requirements.
  • Angle configuration supports access where housings, brackets, fixtures, or neighboring components restrict straight-line tool positioning.
  • Automatic shut-off establishes a defined fastening endpoint and reduces reliance on operator timing at the completion of each cycle.
  • Slow-speed configuration favors increased torque capability and controlled rundown over rapid fastener installation.
  • Pneumatic operation supports repetitive production fastening when supplied with properly conditioned compressed air.

Made in USA: Made in USA

Applications:

  • Automotive component assembly — tightening compatible fasteners positioned among brackets, housings, fixtures, and closely spaced components.
  • Equipment manufacturing — completing controlled fastening where surrounding structures restrict direct access to the joint.
  • Appliance assembly — reaching fastening points within frames and internal assemblies where an angle tool configuration improves accessibility.
  • Electrical and electromechanical production — performing repetitive fastening inside cabinets, equipment assemblies, and compact component layouts.
  • Fixture-based assembly stations — accessing recessed or side-oriented fastening points while maintaining controlled tightening within the specified torque range.

FAQs:

  • Q: What torque range does the Ingersoll Rand QA1L05S1LD provide?
    A: The specified torque range is 3.5 to 56.4 in-lbs. Establish the appropriate clutch setting on the actual production joint based on the fastener, joint characteristics, component materials, and assembly requirements.
  • Q: Why select a 500 RPM nutrunner for production assembly?
    A: The slower speed provides a more deliberate fastener rundown and suits compatible applications where controlled tightening and greater torque capability are more important than minimizing rundown time.
  • Q: What does the adjustable shut-off clutch do?
    A: The clutch allows the tool to be adjusted within its specified torque range. When the preset torque point is reached, the nutrunner automatically shuts off to provide a controlled endpoint for the fastening cycle.
  • Q: Where is an angle air nutrunner useful?
    A: The angle configuration can improve access to fasteners positioned near housings, brackets, fixtures, or other components that make straight-line tool alignment difficult.
  • Q: Should the clutch setting be rechecked when production conditions change?
    A: Yes. Changes to fasteners, joint materials, drive tooling, component conditions, or compressed-air supply can affect fastening results. Recheck the setting on the actual production joint and verify completed fasteners according to the required quality-control procedure.
Available Variations and Specifications
Model Torque Range 1
in-lbs (Nm)		 Torque Range 2
in-lbs (Nm)		 Torque Range 3
in-lbs (Nm)		 RPM Weight
lbs (kg)		 Length
in (mm)		 Head Height
in (mm)		 Side to Center
in (mm)		 Drive
in
Lever Start
QA1L18S4SD 3.5–11.5 (0.4–1.3) 9.3–26.1 (1.05–2.95) — 1,750 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L18S1LD 3.5–11.5 (0.4–1.3) 9.3–26.1 (1.05–2.95) — 1,750 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S4LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S4SD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L12S1LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S9LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L08S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L08S6LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 3/8"
QA1L08S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S4SD 3.5–11.5 (0.4–1.3) 9.3–36.0 (1.05–4.07) — 500 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L05S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (0.9) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S6LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (0.9) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 3/8"
QA1L05S6XLD 11.7–38.2 (1.32–4.32) 31.0–88.3 (3.5–9.98) — 500 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 3/8"
QA1L05S9LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S1XLD 11.7–38.2 (1.32–4.32) 31.0–88.3 (3.5–9.98) — 500 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 250 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 250 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S6XLD 11.7–38.2 (1.32–4.32) 31.0–101.5 (3.50–11.5) — 250 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 3/8"
QA1L02S1XLD 11.7–38.2 (1.32–4.32) 31.0–101.5 (3.50–11.5) — 250 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 1/4"

industrial-tools-parts-breakdown.pngLooking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Nutrunners for your assembly application, please email info@intlairtool.com or call (800) 608-5210

Specifications
Type:
Nutrunner
Actuation:
Lever Start
Torque Range (in-lbs):
3.5 - 56.4
RPM:
500
Side to Center (in.):
0.52
Drive Size (in.):
1/4
Sound Level (dbA):
75
Air Inlet:
1/4" NPT
Air Consumption (CFM):
16
Drive Type:
Hex Quick Change
Angle Head Height (in.):
1.3
Hose Size (in.):
1/4
Warranty Information
One year warranty against defects in materials and workmanship
California Proposition 65 Warning

warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

Reviews
!