For assembly operations that need increased torque capability without sacrificing access around crowded components, the Ingersoll Rand QA1L08S4LD Angle Air Nutrunner combines 850 RPM free speed with a 3.5 to 47.2 in-lb torque range and an adjustable shut-off clutch. The angle configuration helps operators reach fasteners where housings, brackets, or fixtures restrict straight-line access, while automatic clutch shut-off provides a controlled endpoint for repetitive tightening cycles.
The Ingersoll Rand QA1L08S4LD operates at a more deliberate 850 RPM while extending adjustable torque capability to 47.2 in-lbs. This speed-and-torque combination suits compatible production joints that require more turning force than faster QA1L configurations. Once properly adjusted for the application, the shut-off clutch stops the tool at its preset torque point, helping support consistent fastening while the angle layout provides practical access in compact assembly environments.
Type: Angle Air Nutrunner | Model: QA1L08S4LD | Configuration: Angle | Free Speed: 850 RPM | Torque Range: 3.5 - 47.2 in-lbs | Clutch Type: Adjustable Shut-Off
|
Features:
Made in USA: |
 |
Applications:
- Automotive component assembly — tightening compatible fasteners located among brackets, housings, fixtures, and closely positioned components.
- Appliance manufacturing — completing controlled fastening inside frames and internal assemblies where straight-tool clearance is restricted.
- Electrical and electromechanical equipment production — accessing fastening points within cabinets, equipment assemblies, and compact component layouts.
- General production assembly — handling repetitive fastening where increased torque capability, angle access, and automatic shut-off support process requirements.
- Fixture-based workstations — reaching recessed or side-oriented fasteners while maintaining controlled tightening within the specified torque range.
FAQs:
- Q: What torque range does the Ingersoll Rand QA1L08S4LD provide?
A: The specified torque range is 3.5 to 47.2 in-lbs. Establish the appropriate clutch setting on the actual production joint according to the fastener, joint characteristics, component materials, and assembly requirements. - Q: What is the benefit of the 850 RPM configuration?
A: The lower speed provides a more controlled rundown rate while supporting greater maximum torque capability than the supplied faster QA1L configurations. It can be a better fit for compatible joints where additional turning force is more important than maximum rundown speed. - Q: How does the adjustable shut-off clutch work?
A: The clutch is adjusted for the required fastening torque within the tool's specified range. When the preset torque point is reached during tightening, the nutrunner automatically shuts off to provide a controlled cycle endpoint. - Q: Why choose an angle air nutrunner for production assembly?
A: The angle configuration can improve access to fasteners positioned near housings, brackets, fixtures, or other components that make straight-line tool alignment difficult. - Q: Does automatic shut-off eliminate the need to verify completed fasteners?
A: No. Joint characteristics, fastener condition, component materials, drive tooling, and compressed-air conditions can affect final fastening results. Establish the clutch setting on the actual production joint and verify completed fasteners according to the required quality-control procedure.
Available Variations and Specifications
| Model | Torque Range 1 in-lbs (Nm) |
Torque Range 2 in-lbs (Nm) |
Torque Range 3 in-lbs (Nm) |
RPM | Weight lbs (kg) |
Length in (mm) |
Head Height in (mm) |
Side to Center in (mm) |
Drive in |
|---|---|---|---|---|---|---|---|---|---|
| Lever Start | |||||||||
| QA1L18S4SD | 3.5–11.5 (0.4–1.3) | 9.3–26.1 (1.05–2.95) | — | 1,750 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L18S1LD | 3.5–11.5 (0.4–1.3) | 9.3–26.1 (1.05–2.95) | — | 1,750 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S4LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S4SD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L12S1LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S9LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L08S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L08S6LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L08S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S4SD | 3.5–11.5 (0.4–1.3) | 9.3–36.0 (1.05–4.07) | — | 500 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L05S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (0.9) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S6LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (0.9) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L05S6XLD | 11.7–38.2 (1.32–4.32) | 31.0–88.3 (3.5–9.98) | — | 500 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L05S9LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S1XLD | 11.7–38.2 (1.32–4.32) | 31.0–88.3 (3.5–9.98) | — | 500 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 250 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 250 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S6XLD | 11.7–38.2 (1.32–4.32) | 31.0–101.5 (3.50–11.5) | — | 250 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L02S1XLD | 11.7–38.2 (1.32–4.32) | 31.0–101.5 (3.50–11.5) | — | 250 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 1/4" |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the proper Ingersoll Rand Nutrunners for your assembly application, please email info@intlairtool.com or call (800) 608-5210
- Type
- Nutrunner
- Actuation
- Lever Start
- Torque Range (in-lbs)
- 3.5 - 47.2
- RPM
- 850
- Side to Center (in.)
- 0.52
- Drive Size (in.)
- 1/4
- Sound Level (dbA)
- 75
- Air Inlet
- 1/4" NPT
- Air Consumption (CFM)
- 16
- Drive Type
- Square Drive
- Hose Size (in.)
- 1/4
This product hasn't received any reviews yet. Be the first to review this product!