null Skip to main content
Ingersoll Rand QA1L02S1LD Angle Air Nutrunner | 250 RPM | 3.5 - 56.4 (in-lbs) Torque Range | Adjustable Shut-Off Clutch

Product images may not be an exact representation of the actual product. Please check the description below for technical specifications.

Ingersoll Rand

Ingersoll Rand QA1L02S1LD Angle Air Nutrunner | 250 RPM | 3.5 - 56.4 (in-lbs) Torque Range | Adjustable Shut-Off Clutch

List Price: $2,566.00
$1,952.38
(You save $613.62 )
Availability:
Available To Order From Supplier
SKU:
QA1L02S1LD
Shipping:
Calculated at Checkout
Weight:
2.62 LBS
Condition:
New
Adding to cart… The item has been added
Description

For controlled production fastening where a slow rundown rate and angle-head access are important, the Ingersoll Rand QA1L02S1LD Angle Air Nutrunner combines 250 RPM free speed with a 3.5 to 56.4 in-lb torque range and an adjustable shut-off clutch. Its angle configuration helps operators reach fastening points where housings, brackets, fixtures, or adjacent components restrict straight-line tool positioning, while automatic shut-off provides a defined endpoint for repetitive tightening cycles.

The Ingersoll Rand QA1L02S1LD is configured for compatible assembly joints that benefit from deliberate 250 RPM operation rather than rapid fastener rundown. Its adjustable 3.5 to 56.4 in-lb torque range provides flexibility across fastening requirements within the tool's specified capability. Once the clutch is properly set on the actual production joint, the nutrunner automatically stops at the preset torque point, helping support repeatable fastening without relying solely on operator timing.

Type: Angle Air Nutrunner | Model: QA1L02S1LD | Configuration: Angle | Free Speed: 250 RPM | Torque Range: 3.5 - 56.4 in-lbs | Clutch Type: Adjustable Shut-Off

Features:

  • Adjustable shut-off clutch automatically stops the fastening cycle when the preset torque point is reached.
  • 250 RPM free speed provides slow, deliberate fastener rundown for compatible controlled-fastening applications.
  • 3.5 to 56.4 in-lb torque range allows output to be adjusted for production joints within the tool's specified capability.
  • Angle configuration supports access where housings, brackets, fixtures, or surrounding components make straight-line tool positioning difficult.
  • Automatic shut-off provides a controlled fastening endpoint and reduces reliance on manual operator timing at the completion of each cycle.
  • Low-speed configuration suits assembly processes where deliberate rundown takes priority over maximum fastener installation speed.
  • Pneumatic operation supports repetitive production fastening when supplied with properly conditioned compressed air.

Made in USA: Made in USA

Applications:

  • Controlled production assembly — completing compatible fastening cycles where a slower rundown rate supports careful process control.
  • Automotive component manufacturing — reaching fasteners positioned near brackets, housings, fixtures, and closely arranged components.
  • Equipment and appliance assembly — tightening fasteners within frames and internal structures where direct straight-tool access is restricted.
  • Electrical and electromechanical production — performing repetitive fastening inside cabinets, equipment assemblies, and compact component layouts.
  • Fixture-based workstations — accessing recessed or side-oriented fastening points while maintaining adjustable shut-off within the specified torque range.

FAQs:

  • Q: What torque range does the Ingersoll Rand QA1L02S1LD provide?
    A: The specified torque range is 3.5 to 56.4 in-lbs. Establish the appropriate clutch setting on the actual production joint based on the fastener, joint characteristics, component materials, and assembly requirements.
  • Q: Why choose a 250 RPM angle nutrunner?
    A: The 250 RPM configuration provides a slower, more deliberate fastener rundown than higher-speed models. It can suit compatible production processes where controlled tightening is more important than minimizing rundown time.
  • Q: How does the adjustable shut-off clutch work?
    A: The clutch is adjusted for the required fastening torque within the specified range. When the preset torque point is reached, the nutrunner automatically shuts off to provide a controlled endpoint for the cycle.
  • Q: What is the advantage of the angle configuration?
    A: The angle layout can improve access to fasteners positioned near housings, brackets, fixtures, or neighboring components that make alignment with a straight fastening tool difficult.
  • Q: Should the clutch setting be checked after changes to the assembly process?
    A: Yes. Changes to fasteners, joint materials, drive tooling, component conditions, or compressed-air supply can affect fastening results. Recheck the setting on the actual production joint and verify completed fasteners according to the required quality-control procedure.
Available Variations and Specifications
Model Torque Range 1
in-lbs (Nm)		 Torque Range 2
in-lbs (Nm)		 Torque Range 3
in-lbs (Nm)		 RPM Weight
lbs (kg)		 Length
in (mm)		 Head Height
in (mm)		 Side to Center
in (mm)		 Drive
in
Lever Start
QA1L18S4SD 3.5–11.5 (0.4–1.3) 9.3–26.1 (1.05–2.95) — 1,750 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L18S1LD 3.5–11.5 (0.4–1.3) 9.3–26.1 (1.05–2.95) — 1,750 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S4LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S4SD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L12S1LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S9LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L08S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L08S6LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 3/8"
QA1L08S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S4SD 3.5–11.5 (0.4–1.3) 9.3–36.0 (1.05–4.07) — 500 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L05S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (0.9) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S6LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (0.9) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 3/8"
QA1L05S6XLD 11.7–38.2 (1.32–4.32) 31.0–88.3 (3.5–9.98) — 500 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 3/8"
QA1L05S9LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S1XLD 11.7–38.2 (1.32–4.32) 31.0–88.3 (3.5–9.98) — 500 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 250 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 250 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S6XLD 11.7–38.2 (1.32–4.32) 31.0–101.5 (3.50–11.5) — 250 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 3/8"
QA1L02S1XLD 11.7–38.2 (1.32–4.32) 31.0–101.5 (3.50–11.5) — 250 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 1/4"

industrial-tools-parts-breakdown.pngLooking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Nutrunners for your assembly application, please email info@intlairtool.com or call (800) 608-5210

Specifications
Type:
Nutrunner
Actuation:
Lever Start
Torque Range (in-lbs):
3.5 - 56.4
RPM:
250
Side to Center (in.):
0.52
Drive Size (in.):
1/4
Sound Level (dbA):
75
Air Inlet:
1/4" NPT
Air Consumption (CFM):
16
Drive Type:
Hex Quick Change
Angle Head Height (in.):
1.3
Hose Size (in.):
1/4
Warranty Information
One year warranty against defects in materials and workmanship
California Proposition 65 Warning

warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

Reviews
!