null Skip to main content
Ingersoll Rand QA1L08S1LD Angle Air Nutrunner | 850 RPM | 3.5 - 47.2 (in-lbs) Torque Range | Adjustable Shut-Off Clutch

Product images may not be an exact representation of the actual product. Please check the description below for technical specifications.

Ingersoll Rand

Ingersoll Rand QA1L08S1LD Angle Air Nutrunner | 850 RPM | 3.5 - 47.2 (in-lbs) Torque Range | Adjustable Shut-Off Clutch

List Price: $2,474.00
$1,882.38
(You save $591.62 )
Availability:
Available To Order From Supplier
SKU:
QA1L08S1LD
Shipping:
Calculated at Checkout
Weight:
2.62 LBS
Condition:
New
Adding to cart… The item has been added
Description

For production assembly tasks that require controlled fastening and practical access around closely positioned components, the Ingersoll Rand QA1L08S1LD Angle Air Nutrunner combines 850 RPM free speed with a 3.5 to 47.2 in-lb torque range and an adjustable shut-off clutch. Its angle configuration helps reach fastening points where surrounding parts or fixtures can restrict straight-line tool access, while automatic clutch shut-off provides a controlled endpoint for repetitive tightening cycles.

The Ingersoll Rand QA1L08S1LD is configured for compatible production joints that benefit from increased torque capability and a more deliberate rundown rate. Its 850 RPM speed is paired with adjustment up to 47.2 in-lbs, providing greater maximum torque capability than the supplied faster QA1L configurations. When properly set for the actual joint, the adjustable clutch automatically shuts the tool off at the preset torque point, supporting repeatable fastening in compact assembly environments.

Type: Angle Air Nutrunner | Model: QA1L08S1LD | Configuration: Angle | Free Speed: 850 RPM | Torque Range: 3.5 - 47.2 in-lbs | Clutch Type: Adjustable Shut-Off

Features:

  • Adjustable shut-off clutch automatically stops the fastening cycle when the preset torque point is reached.
  • 850 RPM free speed provides controlled fastener rundown for compatible assembly joints requiring increased torque capability.
  • 3.5 to 47.2 in-lb torque range allows output to be adjusted for different fastening requirements within the specified range.
  • Angle configuration supports access where housings, brackets, fixtures, or surrounding components make straight-line tool positioning difficult.
  • Automatic shut-off provides a defined fastening endpoint and reduces reliance on the operator to manually stop each tightening cycle.
  • Lower-speed configuration prioritizes additional torque capability over the faster rundown provided by higher-speed QA1L models.
  • Pneumatic operation supports repetitive fastening cycles when supplied with properly conditioned compressed air.

Made in USA: Made in USA

Applications:

  • Automotive component production — completing controlled fastening around brackets, housings, fixtures, and closely spaced assembly components.
  • Appliance assembly — tightening compatible fasteners within frames and internal structures where straight-tool clearance is restricted.
  • Electrical and electromechanical manufacturing — accessing fastening points inside cabinets, equipment assemblies, and compact component arrangements.
  • General production fastening — handling repetitive assembly tasks that require adjustable torque shut-off and access to obstructed fastening locations.
  • Fixture-based workstations — reaching recessed or side-oriented fasteners while maintaining controlled tightening within the specified torque range.

FAQs:

  • Q: What is the torque range of the Ingersoll Rand QA1L08S1LD?
    A: The specified torque range is 3.5 to 47.2 in-lbs. The appropriate clutch setting should be established on the actual production joint according to the fastener, joint characteristics, component materials, and assembly requirements.
  • Q: Why would an assembly operation choose the 850 RPM configuration?
    A: The 850 RPM configuration provides a more deliberate rundown rate while offering greater maximum torque capability than the supplied faster QA1L models. It can suit compatible joints where additional turning force takes priority over maximum rundown speed.
  • Q: What happens when the preset clutch setting is reached?
    A: The adjustable shut-off clutch automatically stops the tool when its preset torque point is reached, providing a controlled endpoint for the fastening cycle and helping support repeatable assembly results.
  • Q: Where does an angle nutrunner offer an advantage over a straight tool?
    A: The angle configuration can improve access to fasteners positioned near housings, brackets, fixtures, or adjacent components where a straight tool cannot be conveniently aligned with the joint.
  • Q: Does the clutch setting need to be checked after production changes?
    A: Yes. Changes to fasteners, joint materials, drive tooling, assembly conditions, or compressed-air supply can affect fastening results. Recheck the setting on the actual joint and verify completed fasteners according to the required quality-control procedure.
Available Variations and Specifications
Model Torque Range 1
in-lbs (Nm)		 Torque Range 2
in-lbs (Nm)		 Torque Range 3
in-lbs (Nm)		 RPM Weight
lbs (kg)		 Length
in (mm)		 Head Height
in (mm)		 Side to Center
in (mm)		 Drive
in
Lever Start
QA1L18S4SD 3.5–11.5 (0.4–1.3) 9.3–26.1 (1.05–2.95) — 1,750 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L18S1LD 3.5–11.5 (0.4–1.3) 9.3–26.1 (1.05–2.95) — 1,750 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S4LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S4SD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L12S1LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L12S9LD 3.5–11.5 (0.4–1.3) 9.3–32.2 (1.1–3.64) — 1,270 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L08S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L08S6LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 3/8"
QA1L08S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–47.2 (1.77–5.33) 850 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S4SD 3.5–11.5 (0.4–1.3) 9.3–36.0 (1.05–4.07) — 500 1.9 (0.9) 11.8" (300) 0.38" (9.5) 1.1" (28) 1/4"
QA1L05S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (0.9) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S6LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (0.9) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 3/8"
QA1L05S6XLD 11.7–38.2 (1.32–4.32) 31.0–88.3 (3.5–9.98) — 500 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 3/8"
QA1L05S9LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 500 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L05S1XLD 11.7–38.2 (1.32–4.32) 31.0–88.3 (3.5–9.98) — 500 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S4LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 250 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S1LD 3.5–11.5 (0.4–1.3) 9.3–33.4 (1.05–3.77) 15.7–56.4 (1.77–6.37) 250 2.1 (1.0) 11.9" (302.3) 0.52" (13.2) 1.3" (33) 1/4"
QA1L02S6XLD 11.7–38.2 (1.32–4.32) 31.0–101.5 (3.50–11.5) — 250 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 3/8"
QA1L02S1XLD 11.7–38.2 (1.32–4.32) 31.0–101.5 (3.50–11.5) — 250 2.3 (1.04) 13.0" (330) 0.52" (13.2) 1.3" (33) 1/4"

industrial-tools-parts-breakdown.pngLooking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Nutrunners for your assembly application, please email info@intlairtool.com or call (800) 608-5210

Specifications
Type:
Nutrunner
Actuation:
Lever Start
Torque Range (in-lbs):
3.5 - 47.2
RPM:
850
Side to Center (in.):
0.52
Drive Size (in.):
1/4
Sound Level (dbA):
75
Air Inlet:
1/4" NPT
Air Consumption (CFM):
16
Drive Type:
Hex Quick Change
Angle Head Height (in.):
1.3
Hose Size (in.):
1/4
Warranty Information
One year warranty against defects in materials and workmanship
California Proposition 65 Warning

warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

Reviews
!