For higher-torque production fastening in assemblies where direct tool access is limited, the Ingersoll Rand QA1L05S1XLD Angle Air Nutrunner combines 500 RPM free speed with an 11.7 to 88.3 in-lb torque range and an adjustable shut-off clutch. Its angle configuration helps operators reach fastening points around housings, brackets, fixtures, and closely positioned components, while automatic clutch shut-off provides a controlled endpoint for repetitive tightening cycles.
The Ingersoll Rand QA1L05S1XLD is configured for compatible assembly joints requiring greater torque capability than lower-range QA1L05 models. Its deliberate 500 RPM speed supports controlled fastener rundown, while adjustment from 11.7 to 88.3 in-lbs provides the output range needed for higher-torque fastening applications. Once properly set on the actual production joint, the shut-off clutch automatically stops the tool at the preset torque point to help support consistent fastening from cycle to cycle.
Type: Angle Air Nutrunner | Model: QA1L05S1XLD | Configuration: Angle | Free Speed: 500 RPM | Torque Range: 11.7 - 88.3 in-lbs | Clutch Type: Adjustable Shut-Off
|
Features:
Made in USA: |
 |
Applications:
- Automotive component assembly — tightening compatible higher-torque fasteners positioned around housings, brackets, fixtures, and adjacent components.
- Equipment manufacturing — completing controlled fastening where the joint requires greater turning force and surrounding structures restrict direct access.
- Appliance and electromechanical assembly — reaching fastening points within frames, equipment assemblies, and compact component layouts.
- General production fastening — performing repetitive assembly operations requiring adjustable shut-off within the tool's specified higher torque range.
- Fixture-based assembly stations — accessing recessed or side-oriented fasteners while maintaining a controlled fastening cycle in restricted layouts.
FAQs:
- Q: What torque range does the Ingersoll Rand QA1L05S1XLD provide?
A: The specified torque range is 11.7 to 88.3 in-lbs. Establish the appropriate clutch setting on the actual production joint according to the fastener, joint characteristics, component materials, and assembly requirements. - Q: How does the QA1L05S1XLD differ from the QA1L05S1LD?
A: Both supplied models operate at 500 RPM, but the QA1L05S1XLD has an 11.7 to 88.3 in-lb torque range, while the QA1L05S1LD has a 3.5 to 56.4 in-lb range. The QA1L05S1XLD provides the higher maximum torque capability, while the QA1L05S1LD extends to a lower minimum torque setting. - Q: What happens when the adjustable shut-off clutch reaches its preset point?
A: The nutrunner automatically stops when the preset torque point is reached, providing a controlled endpoint for the fastening cycle and helping support repeatable tightening when the tool is properly set for the joint. - Q: Why choose an angle nutrunner for higher-torque production fastening?
A: The angle configuration can improve access to fasteners positioned near housings, brackets, fixtures, or other components where a straight tool is difficult to align. The required torque range and available working clearance should both be considered when selecting the tool. - Q: Should the clutch setting be verified after changes to the assembly process?
A: Yes. Changes to fasteners, joint materials, drive tooling, component conditions, or compressed-air supply can affect fastening results. Recheck the setting on the actual production joint and verify completed fasteners according to the required quality-control procedure.
Available Variations and Specifications
| Model | Torque Range 1 in-lbs (Nm) |
Torque Range 2 in-lbs (Nm) |
Torque Range 3 in-lbs (Nm) |
RPM | Weight lbs (kg) |
Length in (mm) |
Head Height in (mm) |
Side to Center in (mm) |
Drive in |
|---|---|---|---|---|---|---|---|---|---|
| Lever Start | |||||||||
| QA1L18S4SD | 3.5–11.5 (0.4–1.3) | 9.3–26.1 (1.05–2.95) | — | 1,750 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L18S1LD | 3.5–11.5 (0.4–1.3) | 9.3–26.1 (1.05–2.95) | — | 1,750 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S4LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S4SD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L12S1LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S9LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L08S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L08S6LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L08S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S4SD | 3.5–11.5 (0.4–1.3) | 9.3–36.0 (1.05–4.07) | — | 500 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L05S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (0.9) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S6LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (0.9) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L05S6XLD | 11.7–38.2 (1.32–4.32) | 31.0–88.3 (3.5–9.98) | — | 500 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L05S9LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S1XLD | 11.7–38.2 (1.32–4.32) | 31.0–88.3 (3.5–9.98) | — | 500 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 250 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 250 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S6XLD | 11.7–38.2 (1.32–4.32) | 31.0–101.5 (3.50–11.5) | — | 250 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L02S1XLD | 11.7–38.2 (1.32–4.32) | 31.0–101.5 (3.50–11.5) | — | 250 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 1/4" |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the proper Ingersoll Rand Nutrunners for your assembly application, please email info@intlairtool.com or call (800) 608-5210
- Type
- Nutrunner
- Actuation
- Lever Start
- Torque Range (in-lbs)
- 11.7 - 88.3
- RPM
- 500
- Side to Center (in.)
- 0.52
- Drive Size (in.)
- 1/4
- Sound Level (dbA)
- 75
- Air Inlet
- 1/4" NPT
- Air Consumption (CFM)
- 16
- Drive Type
- Hex Quick Change
- Angle Head Height (in.)
- 1.3
- Hose Size (in.)
- 1/4
One year warranty against defects in materials and workmanship
WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
www.P65Warnings.ca.gov
This product hasn't received any reviews yet. Be the first to review this product!