For higher-torque assembly work that benefits from a slow fastening cycle and angle-head accessibility, the Ingersoll Rand QA1L02S1XLD Angle Air Nutrunner combines 250 RPM free speed with an 11.7 to 101.5 in-lb torque range and an adjustable shut-off clutch. The angle configuration supports tool positioning around housings, brackets, fixtures, and adjacent components that can obstruct straight-line access, while automatic shut-off provides a controlled endpoint for repetitive fastening cycles.
The Ingersoll Rand QA1L02S1XLD delivers deliberate 250 RPM operation with adjustable torque capability reaching 101.5 in-lbs. This combination is suited to compatible production joints that require greater turning force without prioritizing rapid rundown. Once properly adjusted on the actual assembly joint, the shut-off clutch automatically stops the nutrunner at the preset torque point, helping support consistent fastening and reducing reliance on operator timing at the end of each cycle.
Type: Angle Air Nutrunner | Model: QA1L02S1XLD | Configuration: Angle | Free Speed: 250 RPM | Torque Range: 11.7 - 101.5 in-lbs | Clutch Type: Adjustable Shut-Off
|
Features:
Made in USA: |
 |
Applications:
- Equipment manufacturing — completing higher-torque fastening where structural components or fixtures restrict direct access to the joint.
- Automotive component assembly — reaching fasteners positioned among brackets, housings, fixtures, and closely spaced components.
- Appliance production — performing controlled fastening within frames and internal assemblies where angle-head access is beneficial.
- Electromechanical assembly — tightening compatible fasteners inside equipment layouts where both access and controlled torque application are important.
- Production workstations — handling repetitive fastening operations that require slow rundown and adjustable automatic shut-off within the specified torque range.
FAQs:
- Q: What is the torque range of the Ingersoll Rand QA1L02S1XLD?
A: The specified torque range is 11.7 to 101.5 in-lbs. Establish the appropriate clutch setting on the actual production joint based on the fastener, joint characteristics, component materials, and assembly requirements. - Q: Why would an assembly process use a 250 RPM nutrunner?
A: The 250 RPM configuration provides a slow, deliberate fastener rundown. It can suit compatible applications where controlled tightening and higher torque capability are more important than minimizing rundown time. - Q: What does the adjustable shut-off clutch do?
A: The clutch is adjusted for the required fastening torque within the tool's specified range. When the preset torque point is reached, the nutrunner automatically stops to provide a controlled endpoint for the fastening cycle. - Q: How does the QA1L02S1XLD differ from the QA1L02S1LD?
A: Both supplied models operate at 250 RPM, but the QA1L02S1XLD has an 11.7 to 101.5 in-lb torque range, while the QA1L02S1LD has a 3.5 to 56.4 in-lb range. The QA1L02S1XLD provides higher maximum torque capability, while the QA1L02S1LD extends to a lower minimum torque setting. - Q: Should fastening results be verified after changing production components?
A: Yes. Changes to fasteners, joint materials, drive tooling, component conditions, or compressed-air supply can affect fastening results. Recheck the clutch setting on the actual production joint and verify completed fasteners according to the required quality-control procedure.
Available Variations and Specifications
| Model | Torque Range 1 in-lbs (Nm) |
Torque Range 2 in-lbs (Nm) |
Torque Range 3 in-lbs (Nm) |
RPM | Weight lbs (kg) |
Length in (mm) |
Head Height in (mm) |
Side to Center in (mm) |
Drive in |
|---|---|---|---|---|---|---|---|---|---|
| Lever Start | |||||||||
| QA1L18S4SD | 3.5–11.5 (0.4–1.3) | 9.3–26.1 (1.05–2.95) | — | 1,750 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L18S1LD | 3.5–11.5 (0.4–1.3) | 9.3–26.1 (1.05–2.95) | — | 1,750 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S4LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S4SD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L12S1LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L12S9LD | 3.5–11.5 (0.4–1.3) | 9.3–32.2 (1.1–3.64) | — | 1,270 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L08S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L08S6LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L08S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–47.2 (1.77–5.33) | 850 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S4SD | 3.5–11.5 (0.4–1.3) | 9.3–36.0 (1.05–4.07) | — | 500 | 1.9 (0.9) | 11.8" (300) | 0.38" (9.5) | 1.1" (28) | 1/4" |
| QA1L05S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (0.9) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S6LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (0.9) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L05S6XLD | 11.7–38.2 (1.32–4.32) | 31.0–88.3 (3.5–9.98) | — | 500 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L05S9LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 500 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L05S1XLD | 11.7–38.2 (1.32–4.32) | 31.0–88.3 (3.5–9.98) | — | 500 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S4LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 250 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S1LD | 3.5–11.5 (0.4–1.3) | 9.3–33.4 (1.05–3.77) | 15.7–56.4 (1.77–6.37) | 250 | 2.1 (1.0) | 11.9" (302.3) | 0.52" (13.2) | 1.3" (33) | 1/4" |
| QA1L02S6XLD | 11.7–38.2 (1.32–4.32) | 31.0–101.5 (3.50–11.5) | — | 250 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 3/8" |
| QA1L02S1XLD | 11.7–38.2 (1.32–4.32) | 31.0–101.5 (3.50–11.5) | — | 250 | 2.3 (1.04) | 13.0" (330) | 0.52" (13.2) | 1.3" (33) | 1/4" |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the proper Ingersoll Rand Nutrunners for your assembly application, please email info@intlairtool.com or call (800) 608-5210
- Type
- Nutrunner
- Actuation
- Lever Start
- Torque Range (in-lbs)
- 11.7 - 101.5
- RPM
- 250
- Side to Center (in.)
- 0.52
- Drive Size (in.)
- 1/4
- Sound Level (dbA)
- 75
- Air Inlet
- 1/4" NPT
- Air Consumption (CFM)
- 16
- Drive Type
- Hex Quick Change
- Angle Head Height (in.)
- 1.3
- Hose Size (in.)
- 1/4
This product hasn't received any reviews yet. Be the first to review this product!