When you need a compact, dependable high-pressure reel for grease lines, hydraulic oil, or pressure-wash plumbing, the Coxreels P-HPL-320 spring-rewind reel handles working pressures up to 4,000 PSI (more than enough for typical grease gun circuits, hydraulic service lines, and pressure-washer feeds). It accepts up to 20 feet of 3/8-inch I.D. hose with an 11/16-inch outside diameter, making it well-matched to two-wire braid hydraulic hose and SAE 100R2 grease lines. The P-HPL-320 ships as a bare reel (less hose), so fleet shops, mobile service rigs, and lubrication bays can spec the exact hose, fittings, and end couplings the job requires. The spring rewind mechanism retracts the hose automatically when released and includes an adjustable latch that holds the hose at any working length, supporting industrial maintenance, vehicle service, agricultural equipment shops, and oilfield service trucks.
Specifications
Type: High Pressure Spring Rewind Hose Reel (Less Hose) | Series: P Series | Model: P-HPL-320 | Hose I.D. Capacity (in.): 3/8 | Hose O.D. Capacity (in.): 11/16 | Hose Length Capacity (ft.): 20 | Max Working Pressure (PSI): 4,000 | Max Operating Temperature: 212°F (water/synthetic fluids 135°F max) | Recommended Hose Spec: SAE 100R16 #1 or #2 two-wire braid | Retraction: Spring rewind with adjustable latch | Approx. Weight (lbs.): 47 | Size Index: 4
Key Features
- Spring rewind mechanism retracts hose automatically and locks at any working length via an adjustable ratchet latch
- Rated to 4,000 PSI maximum working pressure for grease, hydraulic oil, and high-pressure fluid service
- Accepts up to 20 ft of 3/8 in. I.D. two-wire braid hose (11/16 in. O.D. capacity) — sold less hose so end users can spec their own fittings and couplings
- Compatible with SAE 100R16 #1 or #2 hydraulic hose for grease and hydraulic oil applications
- Heavy-gauge steel frame and powder-coat finish for shop, field, and mobile-mount service
- Compact P Series footprint suited to truck-bed, wall, ceiling, or under-bench mounting
- Full-flow swivel inlet maintains pressure throughout the rotation cycle
Applications / Best For
- Fleet & heavy truck service — chassis greasing, hydraulic fluid top-offs, and pressure line service on Class 6–8 trucks, trailers, and tractors
- Industrial lubrication bays — centralized grease delivery for production equipment, conveyors, and large bearings
- Agricultural & equipment shops — servicing combines, balers, skid steers, and excavators with grease and hydraulic oil
- Oilfield service trucks & mobile rigs — pressure-rated hose handling for grease and hydraulic circuits in the field
- Pressure washing & high-pressure cleaning — managing 3,000–4,000 PSI feed lines in fixed-bay or mobile setups
- DIY garage & home shop — keeping grease guns, hydraulic jack lines, or pressure-washer hoses off the floor and organized
FAQs
Q: Does the P-HPL-320 come with a hose?
A: No — the "L" in the model number designates "less hose." The reel ships as a bare unit so you can install the exact hose, length, and fittings your application requires. If you'd prefer a reel pre-assembled with hose, look at the standard P-HP-320 (same reel with 20 ft of factory-installed two-wire braid hose).
Q: What hose should I use with this reel?
A: Coxreels specifies SAE 100R16 #1 or #2 two-wire braid hydraulic hose with a 3/8 in. I.D. and a maximum 11/16 in. O.D. This hose rating supports the reel's 4,000 PSI capacity and works for grease, hydraulic oil, and synthetic fluids. Confirm temperature compatibility — 212°F maximum for petroleum fluids, 135°F maximum for water or synthetic fluids.
Q: How does the spring rewind latch work?
A: As you pull hose off the drum, an adjustable ratchet engages and holds the hose at the length you've extended. To retract, give the hose a short tug to release the latch and guide it back onto the drum as the spring pulls it in. The latch can be set to lock at preset positions or be disabled for continuous retraction.
Q: Can I mount this reel overhead, on a wall, or under a bench?
A: Yes — the P Series is designed for multi-orientation mounting (wall, ceiling, floor, truck bed, or under-bench). Make sure the mounting surface can support the reel's 47 lb approximate weight plus the hose weight and the dynamic load of a fully extended pull. Use all four mounting holes and grade-rated hardware for overhead installations.
Q: Is this reel suitable for fuel delivery?
A: The P-HPL-320 is rated for grease, hydraulic oil, water, and air at the listed pressures. For gasoline, diesel, E85, or other fuels, choose a reel designed with Viton or fuel-compatible seals — using the wrong seal material with fuel will degrade the swivel quickly. Contact us for a fuel-rated alternative.
Looking for more information about Coxreels Hose Reels? Click here to view the Catalog.
For help choosing the correct Coxreels Hose Reel for your application, please call (800) 608-5210 or email info@intlairtool.com.
Coxreels offers a 1-year limited warranty on this product.
⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
The P-HPL-320 gives lube techs, fleet mechanics, and home-shop owners a no-compromise way to keep 4,000 PSI hose lines organized, retracted, and ready to deploy. Pair it with the two-wire braid hose and fittings your job calls for, mount it where the work is, and the reel takes care of the rest — pull, work, release, retract.
?? Made in USA
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
