Coxreels P-HP-120 High Pressure Spring Rewind Hose Reel | P Series | 1/4" Hose Diameter | 20' Hose Length | 5000 Max PSI

Compact grease bays, mobile lube rigs, and bench-mounted hydraulic stands need a high-pressure reel sized to fit — and the Coxreels P-HP-120 High Pressure Spring Rewind Hose Reel is the smallest reel in the P Series HP lineup. Twenty feet of 1/4-inch ID hose furnished to SAE 100R1 or R2 specifications (steel-reinforced hydraulic hose constructions used industry-wide for high-pressure fluid service) deliver the full 5,000 PSI working pressure of the larger HP reels in a footprint that drops into tight installations. Rated for grease and hydraulic oil service up to 212°F — or 135°F with water and synthetic fluids — the P-HP-120 covers chassis lubrication, hydraulic test work, and equipment-service stations where pressure rating matters more than reach. The spring rewind motor pulls the stiff braided hose home job after job, the all-steel frame with powder-coat finish stands up to fleet and shop use, and the brass swivel inlet matches the full 5,000 PSI rating. The P-HP-120 fits mobile lube trucks, single-bay grease stations, bench-mounted hydraulic test rigs, and any compact installation where the work needs hydraulic-grade pressure without the wall space of a 25- or 30-foot reel.

Type: Spring Rewind Hose Reel | Series: P Series (High Pressure) | Hose ID (in.): 1/4 | Hose OD (in.): 9/16 | Hose Length (ft): 20 | Hose Construction: SAE 100R1 or R2 Steel Wire Braid | Max Pressure (PSI): 5,000 | Max Temperature (°F): 212 (135 with water or synthetic fluids) | Service: Grease, Hydraulic Oil | Retraction: Spring Rewind | Approx. Weight (lbs): 48

Features

• All-steel frame and base with durable powder-coat finish for long service in industrial, fleet, and equipment-service environments
• Pre-mounted 20-foot, 1/4-inch ID hose furnished with SAE 100R1 or R2 steel wire braid construction — the hydraulic-rated specification supporting 5,000 PSI working pressure
• 5,000 max PSI rating purpose-built for grease and hydraulic oil delivery up to 212°F (135°F with water or synthetic fluids)
• Compact 20-foot hose length suits tight installations, mobile rigs, and bench mounting where longer reels won't fit
• Multi-position adjustable guide arm directs hose payout at floor, bench, or overhead angles to match installation
• Spring motor delivers consistent rewind tension on the stiff braided hose and is rebuildable in the field for extended service life
• CNC-machined brass swivel inlet provides a leak-resistant connection rated to the full 5,000 PSI of the reel
• 46 lb body mounts to wall, ceiling, bench, floor, or vehicle with standard hardware

Made in USA: 

2 Year Warranty 

Applications

• Mobile lube trucks & service rigs — truck-mounted chassis grease and hydraulic fluid delivery where reel footprint matters more than reach
• Compact fleet grease bays — single-bay and short-throw chassis lubrication for trucks, trailers, and tractors
• Bench-mounted hydraulic test stands — jack and ram service, hydraulic tool charging, and shop-side test work within the 5,000 PSI rating
• Equipment dealer service centers — point-of-use grease and hydraulic oil delivery at individual service stations
• Industrial maintenance & MRO — high-pressure lubrication of conveyor bearings, press components, and machinery service points in compact work cells

FAQs:

• Q: When should I pick the 20-foot P-HP-120 over the 25-foot EZ-P-HP-125?
  A: Choose the P-HP-120 when 20 feet of reach covers the work and you don't need controlled retraction — typical for bench-mounted hydraulic stands, mobile rigs where the reel is close to the work, and compact single-bay grease setups. Choose the EZ-P-HP-125 when you need an extra five feet of hose, when operators are nearby during rewind (the EZ-Coil dampener is especially valuable on stiff high-pressure hose), or when you want both upgrades at once.
• Q: Why no EZ-Coil version of the P-HP-120?
  A: Coxreels offers EZ-Coil controlled retraction on selected models, primarily where hose length and weight create meaningful rebound energy. The 20-foot HP-120 has less stored spring energy at full extension than the longer 25-foot HP-125, so the controlled retraction option isn't offered on this SKU. If you need EZ-Coil specifically, step up to the EZ-P-HP-125 (25 ft, 1/4" ID) which shares the same hose specs and pressure rating.
• Q: What does "SAE 100R1 or R2" mean, and why both?
  A: SAE 100R1 and 100R2 are Society of Automotive Engineers specifications for hydraulic hose. R1 uses one layer of steel wire braid reinforcement; R2 uses two layers, giving a higher pressure rating and thicker construction. Coxreels furnishes the P-HP-120 with R1 or R2 hose depending on production lot and supplier; both meet or exceed the 5,000 PSI working pressure of the reel.
• Q: Is this reel rated for hydraulic systems, or just lubrication?
  A: Both. The hose construction is hydraulic-spec, and the reel is rated by Coxreels for grease and hydraulic oil service. That makes it suitable for hydraulic test stands, jack and ram service, and shop-side hydraulic work as well as chassis and equipment grease routes. Confirm fluid compatibility with Coxreels for non-standard hydraulic fluids before installation.
• Q: Can I use this reel for water or pressure washing?
  A: Not as a primary application. The P-HP-120 is rated specifically for grease and hydraulic oil. Water and synthetic fluids are permitted only up to 135°F, and the hose construction is optimized for petroleum fluids rather than continuous water service. For pressure washing and wash-bay work, use a medium-pressure or wash-bay-specific reel.

Looking for more information about the Coxreels Hose Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Hose Reels, please call (800) 608-5210 or email info@intlairtool.com