Pressure-washing trucks, mobile lube rigs, and deeper service bays all share the same problem: a 25-foot medium-pressure reel runs out of hose before the job is done. The Coxreels EZ-P-MP-430 Medium Pressure Spring Rewind Hose Reel solves it with 30 feet of 1/2-inch ID one-wire braid hose meeting SAE 100R1 specifications (a steel-reinforced hydraulic hose construction built to handle real fluid pressure, not just air). Rated to 2,500 max PSI for air, water, and oil service up to 212°F — or 135°F with water and synthetic fluids — the reel covers wash bays, oil dispensing routes, light hydraulic stands, and pressure-cleaning work that would overpower a low-pressure reel. EZ-Coil controlled retraction (a patented safety mechanism that slows hose rewind across the final few feet) tames the rebound of the stiffer braided hose, keeping the nozzle end from snapping back against the drum or the operator. The spring rewind motor pulls the heavier hose home job after job, the all-steel frame stands up to fleet and shop abuse, and the brass swivel inlet matches the full pressure rating. The EZ-P-MP-430 is built for fleet wash bays, mobile detailing rigs, quick-lube and dealer service operations, light hydraulic shops, and agricultural service settings where reach matters as much as pressure.
Type: Spring Rewind Hose Reel | Series: EZ-Coil P Series (Medium Pressure) | Hose ID (in.): 1/2 | Hose OD (in.): 13/16 | Hose Length (ft): 30 | Hose Construction: One-Wire Braid, SAE 100R1 | Max Pressure (PSI): 2,500 | Max Temperature (°F): 212 (135 with water or synthetic fluids) | Service: Air, Water, Oil | Retraction: Spring Rewind with EZ-Coil Controlled Return | Approx. Weight (lbs): 51
Features
- EZ-Coil controlled retraction system slows hose rewind speed to prevent uncontrolled snap-back, especially valuable on stiff reinforced medium-pressure hose
- All-steel frame and base with durable powder-coat finish for long service in industrial, fleet, and equipment-service environments
- Pre-mounted 30-foot, 1/2-inch ID hose with one-wire steel braid construction meeting SAE 100R1 — the hydraulic-rated specification that supports 2,500 PSI working pressure
- 2,500 max PSI rating with service compatibility for air, water, and oil up to 212°F (135°F with water or synthetic fluids)
- Multi-position adjustable guide arm directs hose payout at floor, bench, or overhead angles to match installation
- Heavy-duty spring motor delivers consistent rewind tension on the heavier braided hose and is rebuildable in the field for extended service life
- CNC-machined brass swivel inlet provides a leak-resistant connection rated for the full pressure of the reel
- 43 lb body mounts to wall, ceiling, bench, floor, or vehicle with standard hardware
Made in USA: 
Applications:
- Pressure washing & fleet wash bays — feeding wash wands and detail guns across longer bays and around Class 7 / Class 8 trucks where 25 feet comes up short
- Mobile detailing & service rigs — truck-mounted setups where the extra five feet of hose reaches around the vehicle being serviced without repositioning
- Automotive & fleet lube service — oil dispensing routes at quick-lube bays, dealer service centers, and fleet shops covering multiple work positions from a single reel
- Light hydraulic & equipment service — bench and rolling hydraulic test stands, jack and ram service, and equipment shop pressure work within the 2,500 PSI rating
- Agricultural & equipment maintenance — sanitation washdown, equipment cleaning, and oil delivery in barns, dairy operations, and equipment sheds with longer working distances
FAQs:
Q: Should I pick the 25-foot EZ-P-MP-425 or the 30-foot EZ-P-MP-430?
A: Choose the 30-foot EZ-P-MP-430 if your typical work point is more than about 18 to 20 feet from the reel mount — deeper bays, full-size trucks, mobile rigs reaching around a vehicle, or wash setups covering multiple stations from one reel. Running a reel at its full extension every cycle accelerates spring fatigue and swivel wear, so a bit of margin pays back in reel life. If 25 feet comfortably covers the work, the shorter 425 is fine.
Q: What does "SAE 100R1" mean, and why does it matter?
A: SAE 100R1 is the Society of Automotive Engineers specification for hydraulic hose with a single layer of steel wire braid reinforcement. It defines the construction, pressure rating, and minimum burst pressure of the hose. R1 hose is the standard medium-pressure hydraulic hose used across the industry — so the EZ-P-MP-430 isn't just rated for higher pressure on paper, it's built with the hose construction that actually delivers it.
Q: Can I use this reel for gasoline, diesel, or hydraulic fluid?
A: The EZ-P-MP-430 is rated by Coxreels for air, water, and oil service. SAE 100R1 hose is widely used in hydraulic applications, but compatibility with fuels or specific hydraulic fluids depends on the seals, the hose inner liner, and the fluid itself. For fuel delivery, use a dedicated fuel reel with Viton or fuel-rated seals. For hydraulic fluid, confirm compatibility with Coxreels or your fluid supplier before putting the reel into service.
Q: Why is the temperature rating lower with water (135°F) than with oil (212°F)?
A: Water and synthetic fluids accelerate degradation of the hose's inner liner at temperatures where petroleum oils are still well within tolerance. The 212°F rating applies to oil service; with water or synthetic fluid in the line, Coxreels caps the working temperature at 135°F to protect hose life. If you're running hot water above that limit, you need a different reel.
Q: What's the difference between the EZ-P-MP-430 and the standard P-MP-430?
A: Both reels share the same hose, pressure, temperature, and service ratings. The EZ-P-MP-430 adds the EZ-Coil controlled retraction system, which is recommended anywhere operators are nearby during rewind — and is especially valuable on stiff medium-pressure hose where the rebound force is higher. The standard P-MP-430 is a conventional spring rewind without the dampener.
Available Variations and Specifications
| SKU | I.D. | O.D. | FT. | PSI | APRX. LBS. | EZ-COIL SKU | LESS HOSE SKU | APRX. LBS. | SIZE INDEX |
|---|---|---|---|---|---|---|---|---|---|
| LOW PRESSURE — Models with hose are for air water service with a maximum temperature 150°F. Models less hose can be used for air, water or oil. | |||||||||
| P-LP-125 | 1/4" | 1/2" | 25 | 300 | 27 | EZ-P-LP-125 | P-LPL-125 | 24 | 1 |
| P-LP-130 | 1/4" | 1/2" | 30 | 300 | 27 | - | P-LPL-130 | 24 | 1 |
| P-LP-135 | 1/4" | 1/2" | 35 | 300 | 28 | EZ-P-LP-135 | P-LPL-135 | 25 | 1 |
| P-LP-140 | 1/4" | 1/2" | 40 | 300 | 38 | - | P-LPL-140 | 34 | 3 |
| P-LP-150 | 1/4" | 1/2" | 50 | 300 | 40 | EZ-P-LP-150 | P-LPL-150 | 35 | 3 |
| P-LP-325 | 3/8" | 5/8" | 25 | 300 | 28 | EZ-P-LP-325 | P-LPL-325 | 25 | 2 |
| P-LP-330 | 3/8" | 5/8" | 30 | 300 | 37 | EZ-P-LP-330 | P-LPL-330 | 33 | 3 |
| P-LP-335 | 3/8" | 5/8" | 35 | 300 | 39 | EZ-P-LP-335 | P-LPL-335 | 34 | 3 |
| P-LP-340 | 3/8" | 5/8" | 40 | 300 | 39 | - | P-LPL-340 | 34 | 3 |
| P-LP-350 | 3/8" | 5/8" | 50 | 300 | 43 | EZ-P-LP-350 | P-LPL-350 | 36 | 3 |
| P-LP-415 | 1/2" | 3/4" | 15 | 300 | 41 | - | P-LPL-415 | 38 | 4 |
| P-LP-425 | 1/2" | 3/4" | 25 | 300 | 44 | - | P-LPL-425 | 39 | 4 |
| P-LP-430 | 1/2" | 3/4" | 30 | 300 | 45 | EZ-P-LP-430 | P-LPL-430 | 40 | 4 |
| P-LP-450 | 1/2" | 3/4" | 50 | 300 | 50 | EZ-P-LP-450 | P-LPL-450 | 43 | 4 |
| MEDIUM PRESSURE — Reels are furnished with standard one wire braid hose suitable for air, water or oil applications. Hose exceeds SAE R1 specifications. Maximum Temperature 212°F. (If used with water, synthetic fluids 135°F max.) | |||||||||
| P-MP-320 | 3/8" | 11/16" | 25 | 3,000 | 46 | - | P-MPL-320 | 41 | 4 |
| P-MP-325 | 3/8" | 11/16" | 25 | 3,000 | 49 | - | P-MPL-325 | 42 | 4 |
| P-MP-330 | 3/8" | 11/16" | 30 | 3,000 | 51 | - | P-MPL-330 | 43 | 4 |
| P-MP-335 | 3/8" | 11/16" | 35 | 3,000 | 52 | - | P-MPL-335 | 43 | 4 |
| P-MP-420 | 1/2" | 13/16" | 20 | 2,500 | 47 | - | P-MPL-420 | 41 | 4 |
| P-MP-425 | 1/2" | 13/16" | 25 | 2,500 | 49 | EZ-P-MP-425 | P-MPL-425 | 42 | 4 |
| P-MP-430 | 1/2" | 13/16" | 30 | 2,500 | 51 | EZ-P-MP-430 | P-MPL-430 | 43 | 4 |
| HIGH PRESSURE — Reels are furnished standard with S.A.E. 100R16 #1 or #2 wire braid hose suitable for grease and hydraulic oil applications. Maximum Temperature 212°F. (If used with water, synthetic fluids 135°F max.) | |||||||||
| P-HP-120 | 1/4" | 9/16" | 20 | 5,000 | 46 | - | P-HPL-120 | 41 | 4 |
| P-HP-125 | 1/4" | 9/16" | 25 | 5,000 | 48 | EZ-P-HP-125 | P-HPL-125 | 42 | 4 |
| P-HP-130 | 1/4" | 9/16" | 30 | 5,000 | 50 | - | P-HPL-130 | 43 | 4 |
| P-HP-135 | 1/4" | 9/16" | 35 | 5,000 | 51 | - | P-HPL-135 | 43 | 4 |
| P-HP-320 | 3/8" | 11/16" | 20 | 4,000 | 47 | - | P-HPL-320 | 41 | 4 |
| P-HP-325 | 3/8" | 11/16" | 25 | 4,000 | 49 | EZ-P-HP-325 | P-HPL-325 | 42 | 4 |
| P-HP-330 | 3/8" | 11/16" | 30 | 4,000 | 51 | - | P-HPL-330 | 43 | 4 |
Looking for more information about the Coxreels Hose Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Hose Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
