Grease guns, hydraulic test stands, and high-pressure lubrication systems push fluid at pressures most reels can't touch. The Coxreels EZ-P-HP-125 High Pressure Spring Rewind Hose Reel is built for exactly that work, with 25 feet of 1/4-inch ID hose meeting SAE 100R1 or R2 specifications (steel-reinforced hydraulic hose constructions used industry-wide for high-pressure grease and oil delivery). Rated to 5,000 max PSI for grease and hydraulic oil service up to 212°F — or 135°F with water and synthetic fluids — the reel is purpose-built for centralized lubrication routes, fleet grease bays, hydraulic test work, and equipment-service stations where 2,500 PSI medium-pressure reels won't hold up. EZ-Coil controlled retraction (a patented safety mechanism that slows hose rewind across the final few feet) is critical at this hose stiffness — high-pressure braided hose carries serious snap-back energy without it. The heavy-duty spring motor pulls the stiff hose home, the all-steel frame absorbs daily shop abuse, and the brass swivel inlet is rated to match the reel's full 5,000 PSI capacity. The EZ-P-HP-125 is at home in fleet lubrication bays, equipment dealer service centers, hydraulic shops, mining and heavy equipment maintenance, and industrial plants running centralized grease systems.
Type: Spring Rewind Hose Reel | Series: EZ-Coil P Series (High Pressure) | Hose ID (in.): 1/4 | Hose OD (in.): 9/16 | Hose Length (ft): 25 | Hose Construction: SAE 100R1 or R2 Steel Wire Braid | Max Pressure (PSI): 5,000 | Max Temperature (°F): 212 (135 with water or synthetic fluids) | Service: Grease, Hydraulic Oil | Retraction: Spring Rewind with EZ-Coil Controlled Return | Approx. Weight (lbs): 48
Features
- EZ-Coil controlled retraction system slows hose rewind speed to prevent uncontrolled snap-back, critical with stiff high-pressure braided hose where rebound energy is highest
- All-steel frame and base with durable powder-coat finish for long service in industrial, fleet, and equipment-service environments
- Pre-mounted 25-foot, 1/4-inch ID hose furnished with SAE 100R1 or R2 steel wire braid construction — the hydraulic-rated specification supporting 5,000 PSI working pressure
- 5,000 max PSI rating purpose-built for grease and hydraulic oil delivery up to 212°F (135°F with water or synthetic fluids)
- Multi-position adjustable guide arm directs hose payout at floor, bench, or overhead angles to match installation
- Heavy-duty spring motor delivers consistent rewind tension on the stiff braided hose and is rebuildable in the field for extended service life
- CNC-machined brass swivel inlet provides a leak-resistant connection rated to the full 5,000 PSI of the reel
- 46 lb body mounts to wall, ceiling, bench, floor, or vehicle with standard hardware
Made in USA: ![]()
Applications:
- Fleet & truck lubrication bays — high-pressure grease delivery to chassis fittings, fifth-wheel components, and U-joints on Class 7 and Class 8 trucks, trailers, and tractors
- Heavy equipment & construction service — greasing excavators, dozers, loaders, and haul trucks at fixed shop bays and mobile service rigs
- Centralized lubrication systems — distribution-point reels in industrial plants running automated or scheduled grease routes
- Hydraulic shop & test stand service — bench and rolling hydraulic test work, jack and ram service, and high-pressure tool charging within the 5,000 PSI rating
- Agricultural & equipment dealer service — lubrication of combines, tractors, balers, and implements in dealer service centers and farm equipment shops
FAQs:
- Q: What's the difference between an HP reel and an MP reel? Why pay more for 5,000 PSI?
A: The two reels are built for different jobs. Medium-pressure reels (MP series, 2,500 PSI) cover pressure washing, oil dispensing, and light hydraulics. High-pressure reels (HP series, 5,000 PSI) are built for grease delivery and full hydraulic work, where pressures routinely exceed 2,500 PSI. If you're running a grease gun, charging a hydraulic system, or working on heavy equipment chassis lube, the HP reel is the right answer — a 2,500 PSI reel pushed beyond its rating fails dangerously. - Q: What does "SAE 100R1 or R2" mean, and why both?
A: SAE 100R1 and 100R2 are Society of Automotive Engineers specifications for hydraulic hose. R1 uses one layer of steel wire braid reinforcement; R2 uses two layers, giving a higher pressure rating and thicker construction. Coxreels furnishes the EZ-P-HP-125 with R1 or R2 hose depending on production lot and supplier; both meet or exceed the 5,000 PSI working pressure of the reel. - Q: Is this reel rated for hydraulic systems, or just lubrication?
A: Both. The hose construction is hydraulic-spec, and the reel is rated by Coxreels for grease and hydraulic oil service. That makes it suitable for hydraulic test stands, jack and ram service, and shop-side hydraulic work as well as chassis and equipment grease routes. Confirm fluid compatibility with Coxreels for non-standard hydraulic fluids before installation. - Q: Can I use this reel for water or pressure washing?
A: Not as a primary application. The EZ-P-HP-125 is rated specifically for grease and hydraulic oil. Water and synthetic fluids are permitted only up to 135°F, and the hose construction is optimized for petroleum fluids rather than continuous water service. For pressure washing and wash-bay work, use a medium-pressure or wash-bay-specific reel. - Q: What's the difference between the EZ-P-HP-125 and the standard P-HP-125?
A: Both reels share the same hose, pressure, temperature, and service ratings. The EZ-P-HP-125 adds the EZ-Coil controlled retraction system — and on a 5,000 PSI braided hose, that controlled rewind matters more than on any lower-pressure reel. The hose is stiffer and heavier, the rebound force is higher, and an uncontrolled snap-back can do real damage. The standard P-HP-125 is a conventional spring rewind without the dampener.
| HOSE | LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|---|
| SKU | I.D. | O.D. | FT. | PSI | APRX. LBS. |
EZ-COIL SKU | LESS HOSE SKU | APRX. LBS. |
|
|
LOW PRESSUREModels with hose are for air water service with a maximum temperature 150°F. Models less hose can be used for air, water or oil.
|
|||||||||
| P-LP-125 | 1/4" | 1/2" | 25 | 300 | 27 | EZ-P-LP-125 | P-LPL-125 | 24 | 1 |
| P-LP-130 | 1/4" | 1/2" | 30 | 300 | 27 | - | P-LPL-130 | 24 | 1 |
| P-LP-135 | 1/4" | 1/2" | 35 | 300 | 28 | EZ-P-LP-135 | P-LPL-135 | 25 | 1 |
| P-LP-140 | 1/4" | 1/2" | 40 | 300 | 38 | - | P-LPL-140 | 34 | 3 |
| P-LP-150 | 1/4" | 1/2" | 50 | 300 | 40 | EZ-P-LP-150 | P-LPL-150 | 35 | 3 |
| P-LP-325 | 3/8" | 5/8" | 25 | 300 | 28 | EZ-P-LP-325 | P-LPL-325 | 25 | 2 |
| P-LP-330 | 3/8" | 5/8" | 30 | 300 | 37 | EZ-P-LP-330 | P-LPL-330 | 33 | 3 |
| P-LP-335 | 3/8" | 5/8" | 35 | 300 | 38 | EZ-P-LP-335 | P-LPL-335 | 34 | 3 |
| P-LP-340 | 3/8" | 5/8" | 40 | 300 | 39 | - | P-LPL-340 | 34 | 3 |
| P-LP-350 | 3/8" | 5/8" | 50 | 300 | 43 | EZ-P-LP-350 | P-LPL-350 | 36 | 3 |
| P-LP-415 | 1/2" | 3/4" | 15 | 300 | 41 | - | P-LPL-415 | 38 | 4 |
| P-LP-425 | 1/2" | 3/4" | 25 | 300 | 44 | - | P-LPL-425 | 39 | 4 |
| P-LP-430 | 1/2" | 3/4" | 30 | 300 | 45 | EZ-P-LP-430 | P-LPL-430 | 40 | 4 |
| P-LP-450 | 1/2" | 3/4" | 50 | 300 | 48 | EZ-P-LP-450 | P-LPL-450 | 43 | 4 |
|
MEDIUM PRESSUREReels are furnished with standard one wire braid hose suitable for air, water or oil applications. Hose exceeds SAE R1 specifications. Maximum Temperature 212°F (If used with water, synthetic fluids 135°F max.)
|
|||||||||
| P-MP-320 | 3/8" | 1-1/16" | 20 | 3,000 | 46 | - | P-MPL-320 | 41 | 4 |
| P-MP-325 | 3/8" | 1-1/16" | 25 | 3,000 | 49 | - | P-MPL-325 | 42 | 4 |
| P-MP-330 | 3/8" | 1-1/16" | 30 | 3,000 | 51 | - | P-MPL-330 | 43 | 4 |
| P-MP-335 | 3/8" | 1-1/16" | 35 | 3,000 | 52 | - | P-MPL-335 | 43 | 4 |
| P-MP-420 | 1/2" | 13/16" | 20 | 2,500 | 47 | - | P-MPL-420 | 41 | 4 |
| P-MP-425 | 1/2" | 13/16" | 25 | 2,500 | 49 | EZ-P-MP-425 | P-MPL-425 | 42 | 4 |
| P-MP-430 | 1/2" | 13/16" | 30 | 2,500 | 51 | EZ-P-MP-430 | P-MPL-430 | 43 | 4 |
|
HIGH PRESSUREReels are furnished standard with S.A.E. 100R16 #1 or #2 wire braid hose suitable for grease and hydraulic oil applications. Maximum Temperature 212°F. (If used with water, synthetic fluids 135°F max.)
|
|||||||||
| P-HP-120 | 1/4" | 9/16" | 20 | 5,000 | 46 | - | P-HPL-120 | 41 | 4 |
| P-HP-125 | 1/4" | 9/16" | 25 | 5,000 | 48 | EZ-P-HP-125 | P-HPL-125 | 42 | 4 |
| P-HP-130 | 1/4" | 9/16" | 30 | 5,000 | 50 | - | P-HPL-130 | 43 | 4 |
| P-HP-135 | 1/4" | 9/16" | 35 | 5,000 | 51 | - | P-HPL-135 | 43 | 4 |
| P-HP-320 | 3/8" | 1-1/16" | 20 | 4,000 | 47 | - | P-HPL-320 | 41 | 4 |
| P-HP-325 | 3/8" | 1-1/16" | 25 | 4,000 | 49 | EZ-P-HP-325 | P-HPL-325 | 42 | 4 |
| P-HP-330 | 3/8" | 1-1/16" | 30 | 4,000 | 51 | - | P-HPL-330 | 43 | 4 |
Looking for more information about the Coxreels Hose Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Hose Reels, please call (800) 608-5210 or email info@intlairtool.com
- Type
- High Pressure Spring Rewind Hose Reel
- Series
- EZ-P Series
- Hose Inside Diameter (in.)
- 1/4
- Hose Outside Diameter (in.)
- 9/16
- Hose Length (ft.)
- 25
- Hose Included
- Yes
- Maximum Working Pressure (PSI)
- 5000
