Coxreels EZ-P-LP-335 Low Pressure Spring Rewind Hose Reel | EZ-P Series | 3/8" Hose Diameter | 35' Hose Length | 300 Max PSI

Deeper service bays and bigger shop layouts call for more than 30 feet of hose, and the Coxreels EZ-P-LP-335 Low Pressure Spring Rewind Hose Reel adds five more feet of reach to the 3/8-inch low-pressure platform without giving up any flow capacity. The 35-foot, 3/8-inch ID hose carries enough air to drive impact wrenches, ratchets, die grinders, and DA sanders across the full length of a working bay, while the 300 max PSI rating covers air, water, and oil service up to 150°F. EZ-Coil controlled retraction (a patented safety mechanism that slows hose rewind across the final few feet) keeps the brass nozzle end from whipping back against the drum, the wall, or the operator at the end of each job. The spring rewind motor handles the heavy lifting, and a heavy-gauge steel frame with powder-coat finish stands up to daily shop use. The EZ-P-LP-335 is a strong match for multi-bay automotive shops, fleet maintenance facilities, light industrial cells, body shops, and well-equipped home garages where reach and air volume both matter.

Type: Spring Rewind Hose Reel | Series: EZ-Coil P Series (Low Pressure) | Hose ID (in.): 3/8 | Hose OD (in.): 5/8 | Hose Length (ft): 35 | Max Pressure (PSI): 300 | Max Temperature (°F): 150 | Service: Air, Water, Oil | Retraction: Spring Rewind with EZ-Coil Controlled Return | Approx. Weight (lbs): 38

Features:

• EZ-Coil controlled retraction system slows hose rewind speed to prevent uncontrolled snap-back, protecting operators, hose ends, and surrounding equipment
• All-steel frame and base with durable powder-coat finish for long service in shop and light industrial environments
• Pre-mounted 35-foot, 3/8-inch ID hose delivers higher CFM throughput than 1/4-inch reels, supporting larger pneumatic tools without starving them for air
• 300 max PSI rating with service compatibility for air, water, and oil up to 150°F
• Multi-position adjustable guide arm directs hose payout at floor, bench, or overhead angles to match installation
• Sturdy spring motor delivers consistent rewind tension and is rebuildable in the field for extended service life
• CNC-machined brass swivel inlet provides a leak-resistant connection rated for the full pressure of the reel
• 38 lb body mounts to wall, ceiling, bench, floor, or vehicle with standard hardware

Applications:

• Automotive service & repair shops — feeding 3/8-inch air across deep service bays to impact wrenches, ratchets, and DA sanders without losing CFM to a smaller hose
• Fleet & truck maintenance — high-volume air supply for tire work, brake servicing, and pneumatic tools where 30 feet of hose comes up short
• Body shops & paint prep — extended-reach air for sanders, polishers, and blow-offs that need steady CFM across a vehicle-length working area
• Light industrial & MRO — overhead air drops, parts cleaning stations, washdown points, and lubrication delivery across wider work cells
• DIY garage & serious home workshop — covering a full two- or three-car garage with one ceiling-mounted reel, no floor-coiled hose tripping anyone

FAQs:

• Q: Should I get the 30-foot EZ-P-LP-330 or the 35-foot EZ-P-LP-335?
  A: Five feet matters more than it sounds. The 35-foot EZ-P-LP-335 is the right call for deeper bays, wider work cells, or any spot where the reel mounts farther from the typical tool position. If a 30-foot hose just barely reaches the work, step up to the 335 so you're not pulling the reel at full extension every job, which prematurely wears the spring and swivel.
• Q: Why pick a 3/8-inch reel over a 1/4-inch reel?
  A: Air volume. A 3/8-inch ID hose passes more CFM meaningfully at the same pressure than a 1/4-inch hose, so the tool at the end of the line gets the air it needs. If you run impact wrenches, ratchets, die grinders, sanders, or any tool rated above roughly 4 CFM, a 3/8-inch reel keeps the tool at full performance. For blow guns and light tools, a 1/4-inch reel is fine.
• Q: What does the "EZ-Coil" feature actually do?
  A: EZ-Coil is Coxreels' patented controlled retraction system. As the hose rewinds, an internal dampener slows the return speed across the last few feet so the brass nozzle end doesn't whip back and strike the operator, the wall, or the reel housing. Standard spring rewind reels can retract at high speed; EZ-Coil reels are the safer choice in service bays and shared workspaces.
• Q: Can this reel be used for diesel or gasoline?
  A: No. The EZ-P-LP-335 is rated for air, water, and oil service only. For fuel delivery (gasoline, diesel, E85, kerosene) you need a reel with Viton or fuel-rated seals — Coxreels offers dedicated fuel reels for that service.
• Q: What's the difference between the EZ-P-LP-335 and the standard P-LP-335?
  A: Both reels share the same hose, pressure, and service ratings. The EZ-P-LP-335 adds the EZ-Coil controlled retraction system, which is recommended anywhere operators are nearby during rewind. The standard P-LP-335 is a conventional spring rewind without the dampener.

Looking for more information about the Coxreels Hose Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Hose Reels, please call (800) 608-5210 or email info@intlairtool.com