Coxreels EZ-P-MP-425 Medium Pressure Spring Rewind Hose Reel | EZ-P Series | 1/2" Hose Diameter | 25' Hose Length | 2500 Max PSI

Applications that pump above 300 PSI — pressure washers, hydraulic test stands, oil delivery, and demanding water service — need more than a low-pressure reel can offer. The Coxreels EZ-P-MP-425 Medium Pressure Spring Rewind Hose Reel is built for that step up, with 25 feet of 1/2-inch ID one-wire braid hose meeting SAE 100R1 specifications (a steel-reinforced hydraulic hose construction that handles fluid pressure rather than just air). Rated to 2,500 max PSI for air, water, and oil service up to 212°F (or 135°F with water and synthetic fluids), the reel suits high-pressure cleaning, lubrication delivery, and light hydraulic applications that would burst a standard air hose. EZ-Coil controlled retraction (a patented safety mechanism that slows hose rewind across the final few feet) is especially valuable on a stiff reinforced hose — without it, the rebound from a braided line can be punishing. The spring rewind motor handles the heavier hose, the heavy-gauge steel frame absorbs shop abuse, and the brass swivel inlet is rated to the full reel pressure. The EZ-P-MP-425 is at home in fleet wash bays, automotive lube service, light hydraulic shops, agricultural service, and industrial maintenance settings where the working pressure exceeds what a standard air reel can carry.

Type: Spring Rewind Hose Reel | Series: EZ-Coil P Series (Medium Pressure) | Hose ID (in.): 1/2 | Hose OD (in.): 13/16 | Hose Length (ft): 25 | Hose Construction: One-Wire Braid, SAE 100R1 | Max Pressure (PSI): 2,500 | Max Temperature (°F): 212 (135 with water or synthetic fluids) | Service: Air, Water, Oil | Retraction: Spring Rewind with EZ-Coil Controlled Return | Approx. Weight (lbs): 49

Features:

• EZ-Coil controlled retraction system slows hose rewind speed to prevent uncontrolled snap-back, particularly valuable on stiff reinforced medium-pressure hose
• All-steel frame and base with durable powder-coat finish for long service in industrial, fleet, and equipment-service environments
• Pre-mounted 25-foot, 1/2-inch ID hose with one-wire steel braid construction meeting SAE 100R1 — the hydraulic-rated specification that supports 2,500 PSI working pressure
• 2,500 max PSI rating with service compatibility for air, water, and oil up to 212°F (135°F with water or synthetic fluids)
• Multi-position adjustable guide arm directs hose payout at floor, bench, or overhead angles to match installation
• Heavy-duty spring motor delivers consistent rewind tension on the heavier braided hose and is rebuildable in the field for extended service life
• CNC-machined brass swivel inlet provides a leak-resistant connection rated for the full pressure of the reel
• 42 lb body mounts to wall, ceiling, bench, floor, or vehicle with standard hardware

Made in USA: 

2 Year Warranty 

Applications:

• Pressure washing & fleet wash bays — delivering high-pressure water to wash wands and detail guns for truck, equipment, and fleet cleaning operations
• Automotive & fleet lube service — oil dispensing at quick-lube bays, fleet shops, and dealer service centers running motor oil and transmission fluid at elevated pressure
• Light hydraulic & equipment service — bench-mounted hydraulic test feeds, jack and ram service, and equipment shop pressure work within the 2,500 PSI rating
• Agricultural & equipment maintenance — high-pressure water for sanitation, equipment washdown, and oil delivery in barns, dairy operations, and equipment sheds
• Industrial maintenance & MRO — pressurized fluid delivery, cleaning, and lubrication routes where standard low-pressure reels won't hold up

FAQs:

• Q: What does "SAE 100R1" mean, and why does it matter?
  A: SAE 100R1 is the Society of Automotive Engineers specification for hydraulic hose with a single layer of steel wire braid reinforcement. It defines the construction, pressure rating, and minimum burst pressure of the hose. Hose meeting R1 is the standard medium-pressure hydraulic hose used across the industry — so the EZ-P-MP-425 isn't just rated for higher pressure on paper, it's built with the hose construction that actually delivers it.
• Q: Can I use this reel for gasoline, diesel, or hydraulic fluid?
  A: The EZ-P-MP-425 is rated by Coxreels for air, water, and oil service. SAE 100R1 hose is widely used in hydraulic applications, but fuel compatibility and hydraulic fluid compatibility depend on the specific seals, hose inner liner, and the fluid in question. For fuel delivery, use a dedicated fuel reel with Viton or fuel-rated seals. For hydraulic fluid, confirm compatibility with Coxreels or your fluid supplier before putting the reel into service.
• Q: Why is the temperature rating lower with water (135°F) than with oil (212°F)?
  A: Water and synthetic fluids accelerate degradation of the hose's inner liner at temperatures where petroleum oils are still well within tolerance. The 212°F rating applies to oil service; with water or synthetic fluid in the line, Coxreels caps the working temperature at 135°F to protect hose life. If you're running hot water above that limit, you need a different reel.
• Q: What does the "EZ-Coil" feature actually do?
  A: EZ-Coil is Coxreels' patented controlled retraction system. As the hose rewinds, an internal dampener slows the return speed across the last few feet so the hose end doesn't whip back and strike the operator, the wall, or the reel housing. Medium-pressure braided hose is heavier and stiffer than air hose, so the rebound on an uncontrolled rewind hits harder — EZ-Coil is especially worth having at this hose size.
• Q: What's the difference between the EZ-P-MP-425 and the standard P-MP-425?
  A: Both reels share the same hose, pressure, temperature, and service ratings. The EZ-P-MP-425 adds the EZ-Coil controlled retraction system, which is recommended anywhere operators are nearby during rewind — and is especially valuable on stiff medium-pressure hose. The standard P-MP-425 is a conventional spring rewind without the dampener.

Looking for more information about the Coxreels Hose Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Hose Reels, please call (800) 608-5210 or email info@intlairtool.com