When 3,000 PSI isn't enough hydraulic fluid service, high-pressure washdown lines, or any application where the hose sees peak pressure from a hydraulic pump or intensifier the Coxreels HP1125-5-250 steps up with a 4500 PSI working pressure rating on the same proven 1125 Series frame. The HP prefix designates the high-pressure variant: where the standard 1125-5-250 uses a brass swivel, the HP1125 uses an electroless nickel plated steel 90° full-flow NPT swivel with AFLAS seals (a fluoroelastomer a synthetic rubber compound that resists hydraulic oil, fuel, and chemical exposure far better than standard nitrile at elevated temperatures and pressures). The drum holds 250 feet of 3/4-inch I.D. hose up to 250°F and is factory-matched to SAE 100R16 wire braid hose suitable for hydraulic oil and grease applications, though it handles compressed air and water service equally well. No power source required the direct solid steel hand crank puts retraction speed entirely in the operator's hands. Built on the same CNC robotically welded 12-gauge steel "A" frame and ribbed spun-disc drum found across the 1125 Series. Made in the USA, backed by a 2-year warranty.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Hand Crank Hose Reel | Series: HP1125 (High Pressure) | Hose I.D. (in.): 3/4 | Hose O.D. (in.): 1-1/4 | Hose Capacity (ft.): 250 | Hose Included: No | Max PSI: 4500 | Max Temperature (°F): 250 | Inlet Swivel: 3/4 in. F NPT | Swivel Material: Electroless Nickel Plated Steel | Swivel Seals: AFLAS | Width (in.): 42.75 | Height (in.): 18.75 | Length (in.): 17.63
Features:
- 4500 PSI working pressure rating double the capacity of the standard 1125 Series, suited to hydraulic fluid service and high-pressure hose lines
- Electroless nickel plated steel 90° full-flow NPT swivel with AFLAS seals chemical-resistant fluoroelastomer seals rated for hydraulic oil, fuel, and aggressive fluid exposure at elevated temperatures
- Solid steel direct hand crank full operator control over retraction speed with no power source required
- Adjustable tension brake prevents free-wheeling during hose deployment for controlled line management
- Long-handled locking pin secures reel from rotation during transport or storage
- Exclusive low profile outlet riser and open drum slot design provides non-crimping, flat smooth hose wrap to protect high-pressure hose and extend service life
- One-piece CNC robotically welded 12-gauge steel "A" frame base (not bolted) with integrated mounting pattern for permanent or mobile installation
- Heavy duty CNC robotically spun and ribbed discs with rolled edges for structural strength, hose protection, and operator safety
- CPC powder coat finish chip resistant and rust inhibiting for shop, field, and mobile environments
Made in USA: 
Applications:
- Hydraulic fluid service & maintenance managing hydraulic oil return lines, charge lines, and test hoses on industrial machinery, mobile equipment, and hydraulic test benches
- High-pressure washdown & cleaning pressure washing supply lines rated beyond the 3,000 PSI limit of the standard 1125 Series
- Construction & heavy equipment service hose management on service trucks and equipment yards where hydraulic lines run at full pump pressure
- Industrial plant maintenance fixed service drops carrying hydraulic fluid, compressed air, or water on high-pressure plant systems
- Remote & mobile field service truck-mounted or portable service stations where no power source is available and manual retraction is preferred
FAQs:
- Q: What is the difference between the HP1125-5-250 and the standard 1125-5-250?
A: The HP1125 is rated to 4500 PSI vs 3,000 PSI on the standard 1125. It also uses an electroless nickel plated steel swivel with AFLAS seals instead of the brass swivel with nitrile seals on the standard model the AFLAS seals handle hydraulic oil and aggressive chemical exposure better than nitrile. Choose the HP1125 for hydraulic fluid lines and high-pressure applications; the standard 1125 covers air, water, and oil service up to 3,000 PSI. - Q: What hose type should I use with this reel?
A: Coxreels rates the HP1125 for SAE 100R16 #1 or #2 wire braid hose, suitable for hydraulic oil and grease service up to 250°F. Maximum hose O.D. is 1-1/4 inches do not exceed this to maintain rated capacity. The reel also handles air and water service hose rated to 4500 PSI. - Q: Does this reel come with hose?
A: No sold less hose. The drum holds up to 250 feet of 3/4-inch I.D. (1-1/4-inch O.D. max) hose, or up to 500 feet of 1/2-inch I.D. hose with a reducer.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-250 | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250 | 4,500 | 59 | 10 |
| 1125-5-250-A | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-A | 4,500 | 59 | 10 |
| 1125-5-250-AB | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-AB | 4,500 | 59 | 10 |
| 1125-5-250-C | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-C | 4,500 | 59 | 10 |
| 1125-5-250-E | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-E | 4,500 | 59 | 10 |
| 1125-5-250-EA | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EA | 4,500 | 59 | 10 |
| 1125-5-250-EB | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EB | 4,500 | 59 | 10 |
| 1125-5-250-ED | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-ED | 4,500 | 59 | 10 |
| 1125-5-250-EF | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EF | 4,500 | 59 | 10 |
| 1125-5-250-H | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-H | 4,500 | 59 | 10 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
