When the machine already runs a hydraulic circuit at 4500 PSI excavators, forestry equipment, hydraulic service trucks, and high-pressure industrial machinery the Coxreels HP1125-5-250-H closes the loop by tapping that same circuit to power automatic hose retraction, with no separate electrical wiring or air supply required. The end-ported hydraulic motor (connecting via 9/16-18 UNF fittings the standard port thread on mobile equipment hydraulic lines) is the lightest motor option in the HP1125 Series at approximately 6 lbs added weight, and drives quiet, chain-free direct gear retraction whenever the machine's hydraulic system is pressurized. The drum holds 250 feet of 3/4-inch I.D. hose at up to 4500 PSI and 250°F rated to match full hydraulic pump pressure for hydraulic fluid, compressed air, water, and oil service. The electroless nickel plated steel swivel with AFLAS seals (a fluoroelastomer compound specifically well-suited to hydraulic oil and fuel exposure, outperforming standard nitrile at elevated temperatures and pressures) makes the HP1125-5-250-H the most fluid-compatible reel in the HP1125 lineup for hydraulic service applications. Inherently spark-free with no electrical components in the motor assembly a meaningful advantage in fuel handling areas and petrochemical environments. Made in the USA, backed by a 2-year warranty.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Hydraulic Motor Rewind Hose Reel | Series: HP1125 (High Pressure) | Motor Type: Hydraulic, End Ported | Motor Port Fitting: 9/16-18 UNF | Drive: Direct Gear (No Chain) | Hose I.D. (in.): 3/4 | Hose O.D. (in.): 1-1/4 | Hose Capacity (ft.): 250 | Hose Included: No | Max PSI: 4500 | Max Temperature (°F): 250 | Inlet Swivel: 3/4 in. F NPT | Swivel Material: Electroless Nickel Plated Steel | Swivel Seals: AFLAS | Width (in.): 42.75 | Height (in.): 18.75 | Length (in.): 17.63
Features:
- 4500 PSI working pressure rating HP-series drum and swivel rated to match full hydraulic pump pressure, beyond the 3,000 PSI standard 1125 limit
- Hydraulic end-ported motor with 9/16-18 UNF port fittings taps the machine's existing hydraulic circuit for automatic retraction with no electrical wiring or air supply required
- Inherently spark-free operation no electrical components in the motor assembly, suited to fuel handling areas, petrochemical environments, and classified locations where ignition risk is a factor
- Lightest motor option in the HP1125 Series at approximately 6 lbs added weight compact motor assembly with minimal impact on overall reel footprint
- Electroless nickel plated steel 90° full-flow NPT swivel with AFLAS seals fluoroelastomer seals specifically suited to hydraulic oil and fuel service, outperforming standard nitrile at elevated temperatures and pressures
- Reliable direct gear drive for quiet, chain-free retraction when the hydraulic system is pressurized
- Adjustable tension brake prevents free-wheeling during hose deployment for controlled line management
- Exclusive low profile outlet riser and open drum slot design provides non-crimping, flat smooth hose wrap to protect high-pressure hose and extend service life
- One-piece CNC robotically welded 12-gauge steel "A" frame base (not bolted) with integrated mounting pattern for permanent or mobile installation
- CPC powder coat finish chip resistant and rust inhibiting for outdoor, field, and mobile environments
Made in USA: 
Applications:
- High-pressure construction & earthmoving equipment hydraulic-powered retraction on excavators, wheel loaders, and telehandlers that run 4500 PSI circuits, using the machine's own system to manage service hose drops
- Hydraulic test & service equipment automatic retraction on hydraulic test hoses, charge lines, and return lines rated to full pump pressure on test benches and hydraulic service stations
- Forestry & logging machinery hose management on feller bunchers, forwarders, and skidders operating in remote areas far from electrical infrastructure, where the machine's hydraulic system is the only available power source
- Fuel & petroleum service vehicles spark-free hydraulic retraction on high-pressure service lines aboard fuel trucks and petrochemical field service vehicles where electrical motor certification requirements are avoided entirely
- High-pressure industrial plant maintenance fixed hydraulic-powered 4500 PSI service drops in plant areas where both high pressure and spark-free motor operation are required by specification
FAQs:
- Q: What is the difference between the HP1125-5-250-H and the standard 1125-5-250-H?
A: Same hydraulic motor with 9/16-18 UNF end ports, but the HP1125 is rated to 4500 PSI vs 3,000 PSI on the standard 1125, and uses an electroless nickel plated steel swivel with AFLAS seals instead of the brass/nitrile swivel. Choose the HP version for hydraulic fluid lines and high-pressure service; the standard 1125-5-250-H handles air, water, and oil to 3,000 PSI. - Q: Why choose the hydraulic motor over the air motor options (-A or -AB) on the HP1125 series?
A: Choose the -H when the machine already has an active hydraulic circuit and shop air is unavailable at the installation point common on mobile construction and forestry equipment. The hydraulic motor is also inherently spark-free with no electrical components, making it the preferred option near fuel handling or in petrochemical environments where both the explosion-proof electric options and standard air motors may not fit the installation requirements. Air motors (-A, -AB) suit shops and vehicles with existing compressed air infrastructure. - Q: Does this reel come with hose?
A: No sold less hose. The drum holds up to 250 feet of 3/4-inch I.D. (1-1/4-inch O.D. max) hose rated to 4500 PSI, or up to 500 feet of 1/2-inch I.D. hose with a reducer.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-250 | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250 | 4,500 | 59 | 10 |
| 1125-5-250-A | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-A | 4,500 | 59 | 10 |
| 1125-5-250-AB | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-AB | 4,500 | 59 | 10 |
| 1125-5-250-C | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-C | 4,500 | 59 | 10 |
| 1125-5-250-E | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-E | 4,500 | 59 | 10 |
| 1125-5-250-EA | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EA | 4,500 | 59 | 10 |
| 1125-5-250-EB | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EB | 4,500 | 59 | 10 |
| 1125-5-250-ED | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-ED | 4,500 | 59 | 10 |
| 1125-5-250-EF | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EF | 4,500 | 59 | 10 |
| 1125-5-250-H | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-H | 4,500 | 59 | 10 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
