Coxreels HP1125-5-250-ED is built for the specific combination of requirements that no other model in this lineup covers: explosion-proof 12V DC motor retraction on a 4500 PSI-rated hose reel suited to service vehicles operating in or near classified hazardous locations where both vehicle-battery power and ignition-safe electrical equipment are required simultaneously. The explosion-proof 1/2 HP 12V DC motor (built to contain any internal arc or spark within the motor housing so it cannot ignite the surrounding atmosphere required in NEC Class I flammable vapor and Class II combustible dust environments) wires directly to a standard 12V vehicle battery with no 115V AC outlet or separate power source needed. The drum holds 250 feet of 3/4-inch I.D. hose at up to 4500 PSI and 250°F, rated for hydraulic fluid, compressed air, water, and oil service. The electroless nickel plated steel swivel with AFLAS seals (a fluoroelastomer compound that resists hydraulic oil, fuel, and aggressive chemical exposure beyond the limits of standard nitrile) completes the high-pressure, hazardous-location package. Built on the CNC robotically welded 12-gauge steel "A" frame common to the 1125 family. Made in the USA, backed by a 2-year warranty.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: HP1125 (High Pressure) | Motor: 12V DC, 1/2 HP, Explosion Proof | Drive: Direct Gear (No Chain) | Hose I.D. (in.): 3/4 | Hose O.D. (in.): 1-1/4 | Hose Capacity (ft.): 250 | Hose Included: No | Max PSI: 4500 | Max Temperature (°F): 250 | Inlet Swivel: 3/4 in. F NPT | Swivel Material: Electroless Nickel Plated Steel | Swivel Seals: AFLAS | Width (in.): 42.75 | Height (in.): 18.75 | Length (in.): 17.63
Features:
- 4500 PSI working pressure rating HP-series drum and swivel rated for hydraulic fluid service and high-pressure lines beyond the 3,000 PSI standard 1125 limit
- Explosion-proof 12V DC 1/2 HP motor built to NEC hazardous location standards to contain internal ignition and prevent spark propagation in classified environments; wires directly to a standard 12V vehicle battery
- Mobile-ready 12V operation no 115V AC outlet or shop air supply required; suited to service trucks, field vehicles, and mobile units in or near classified locations
- Reliable direct gear drive for quiet, chain-free retraction no chain to adjust, skip, or replace
- Electroless nickel plated steel 90° full-flow NPT swivel with AFLAS seals chemical and temperature-resistant fluoroelastomer seals suited to hydraulic oil, fuel, and aggressive fluid exposure
- Adjustable tension brake prevents free-wheeling during hose deployment for controlled line management
- Exclusive low profile outlet riser and open drum slot design provides non-crimping, flat smooth hose wrap to protect high-pressure hose and extend service life
- One-piece CNC robotically welded 12-gauge steel "A" frame base (not bolted) with integrated mounting pattern for permanent or mobile installation
- CPC powder coat finish chip resistant and rust inhibiting for industrial, chemical facility, and mobile environments
Made in USA: 
Applications:
- Fuel delivery & petroleum service trucks explosion-proof 12V-powered hose retraction on vehicles that operate at fuel terminals, tank farms, and refueling stations where flammable vapor concentrations require ignition-safe electrical equipment
- Mobile hydraulic service in classified locations, 4500 PSI-rated hose management on field service vehicles operating near petrochemical infrastructure, fuel transfer areas, or other NEC Class I classified zones
- Grain & agricultural processing vehicles hose retraction on mobile service equipment operating in NEC Class II combustible dust environments such as grain elevators and feed mills
- Lube & fluid service trucks near fuel handling automatic 12V retraction on oil and hydraulic fluid service vehicles that share yard space with fuel transfer equipment requiring explosion-proof motor certification
- Petrochemical & refinery field service portable and truck-mounted high-pressure hose stations in plant areas where both NEC hazardous location compliance and 12V vehicle power define the installation requirements
FAQs:
- Q: What is the difference between the -ED (12V DC explosion-proof) and the -EA (115V AC explosion-proof)?
A: Both are explosion-proof and HP1125-rated at 4500 PSI. The -ED runs on 12V DC vehicle battery power the right choice for service trucks and mobile units in classified locations where no AC outlet is available. The -EA runs on standard facility 115V AC suited to fixed plant installations with AC panel access. Choose based on your power source at the installation point. - Q: What is the difference between the HP1125-5-250-ED and the standard 1125-5-250-ED?
A: Same explosion-proof 12V DC 1/2 HP motor, but the HP1125 is rated to 4500 PSI vs 3,000 PSI, and uses an electroless nickel plated steel swivel with AFLAS seals instead of the brass/nitrile swivel. Choose the HP version for hydraulic fluid and high-pressure service; the standard 1125-5-250-ED covers air, water, and oil to 3,000 PSI in classified locations. - Q: Does this reel come with hose?
A: No sold less hose. The drum holds up to 250 feet of 3/4-inch I.D. (1-1/4-inch O.D. max) hose rated to 4500 PSI, or up to 500 feet of 1/2-inch I.D. hose with a reducer.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-250 | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250 | 4,500 | 59 | 10 |
| 1125-5-250-A | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-A | 4,500 | 59 | 10 |
| 1125-5-250-AB | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-AB | 4,500 | 59 | 10 |
| 1125-5-250-C | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-C | 4,500 | 59 | 10 |
| 1125-5-250-E | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-E | 4,500 | 59 | 10 |
| 1125-5-250-EA | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EA | 4,500 | 59 | 10 |
| 1125-5-250-EB | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EB | 4,500 | 59 | 10 |
| 1125-5-250-ED | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-ED | 4,500 | 59 | 10 |
| 1125-5-250-EF | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-EF | 4,500 | 59 | 10 |
| 1125-5-250-H | 3/4" | 1 1/4" | 250 | 1/2" | 7/8" | 500 | 3/4" F NPT | 3,000 | HP1125-5-250-H | 4,500 | 59 | 10 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
