Cleco 70ESN1500TA8T NeoTek Inline Corded Electric Nutrunner | 43 RPM | 313 - 1106 (ft-lbs) Torque Range | 1" Square Drive

When high-torque assembly work requires traceable tightening rather than impact-style fastening, the Cleco 70ESN1500TA8T NeoTek Inline Corded Electric Nutrunner delivers controlled output across a 313 - 1106 ft-lbs torque range. It's 43 RPM free speed supports deliberate, repeatable rundown on large fasteners where accuracy, joint control, and production documentation matter more than raw breakaway force. The 1" square drive fits large industrial sockets commonly used in heavy equipment, off-road, rail, structural, and high-torque manufacturing applications.

Part of Cleco’s NeoTek 70 Series, this inline corded electric nutrunner uses transducer control, meaning torque is measured by a built-in sensor and managed through a compatible controller for controlled fastening results. The inline body keeps the tool aligned with the fastener axis. At the same time, the NeoTek platform adds configurable operator feedback, onboard intelligence, and controller-based fastening strategies for quality-critical assembly work.

Type: Corded Electric Nutrunner | Brand: Cleco | Model: 70ESN1500TA8T | Series: NeoTek 70 Series | Configuration: Inline | Control: Transducer Control | Torque Range: 313 - 1106 ft-lbs / 425 - 1500 Nm | Free Speed: 43 RPM | Output Drive: 1" Square Drive | Weight: 19.2 lb / 8.7 kg | Length: 24.4" / 621 mm | Side to Center: 1.6" / 41 mm

Features:

• Transducer control provides measured torque feedback for controller-managed fastening on quality-critical joints.
• Repeatability and accuracy with 2.0 Cm/Cmk at +/- 7% supports consistent fastening results in production environments.
• 43 RPM free speed gives controlled rundown on large fasteners where high torque and repeatability are more important than rapid cycle speed.
• 1" square drive accepts large industrial sockets for high-torque bolting and assembly applications.
• Configurable LED light rings give the operator visual status feedback during the fastening process.
• Tactile and audible operator feedback helps confirm tool status without requiring the user to look away from the work area.
• Programmable multi-function buttons allow setup flexibility for production fastening workflows.
• On-board tool memory, preventive maintenance alerts, internal temperature monitoring, and digital communication help support uptime and process control.

Made in USA:

Applications:

• Heavy equipment assembly — tightening large frame, suspension, axle, and structural fasteners that require controlled torque output.
• Rail and transportation manufacturing — controlled fastening on bogies, couplers, brackets, and other high-load assemblies.
• Off-road and agricultural equipment production — applying repeatable torque to large bolted joints on tractors, loaders, implements, and machinery frames.
• Industrial machinery assembly — fastening gearboxes, large housings, fixtures, base plates, and equipment structures where documentation and consistency matter.
• Oil, gas, and petrochemical equipment manufacturing — controlled bolting on skids, process equipment, and large mechanical assemblies when the controller, socketing, and joint requirements are properly matched.

FAQs:

• Q: What does transducer control mean on this Cleco nutrunner?
  A: Transducer control means the tool uses a torque sensor to measure fastening output and communicate with a compatible controller. This helps manage tightening strategies, operator feedback, and process data for quality-critical assembly work.
• Q: Is the 1106 ft-lbs rating breakaway torque?
  A: No. The 313 - 1106 ft-lbs value is the tool’s controlled torque range for fastening. This is different from an impact wrench breakaway rating, which is normally used for loosening stuck fasteners.
• Q: What sockets does the 70ESN1500TA8T use?
  A: This model has a 1" square drive, so it is used with compatible 1" drive industrial impact or power sockets selected for the fastener size and torque level. Always confirm socket rating before use at high torque.
• Q: Does this tool require a controller?
  A: Yes. NeoTek corded electric nutrunners are part of a controlled fastening system and require compatible Cleco controller and cable selection. Confirm controller compatibility, cable length, and plant power requirements before ordering.
• Q: Is this a good choice for general automotive or home garage work?
  A: This is a high-torque production assembly nutrunner, not a general-purpose automotive impact wrench. It is best suited to controlled industrial fastening cells where torque accuracy, operator feedback, and fastening data are required.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com