Cleco 70EAN205NA6 NeoTek Corded Electric Nutrunner | 555 RPM | 38.35 - 151.20 (ft-lbs) Torque Range | Transducer Control

Built for high-torque production fastening, the Cleco 70EAN205NA6 NeoTek corded electric nutrunner combines a 38.3 - 151.1 ft-lb torque range with 555 r/min speed for controlled rundown on larger threaded fasteners and critical joints. Its right-angle configuration helps operators reach around fixtures, frames, and assembly obstructions, while the 3/4" square drive matches the higher torque class of this 70 Series tool. Transducer control means the tool measures torque through an internal sensing system, supporting repeatable tightening where joint quality and documentation matter.

Part of the Cleco NeoTek fastening system, this corded electric nutrunner is built for smart assembly environments using programmable controls, tool memory, and visual feedback at the workstation. The tool is compatible with the mPro400GCD-P controller, 961560-xxx tool cable, and 961923-xxx tool extension cable, making it a practical choice for production lines already standardized around Cleco NeoTek electric fastening equipment.

Type: Corded Electric Nutrunner | Series: NeoTek 70 Series | Configuration: Right Angle | Control Type: Transducer Control | Torque Range: 52 - 205 Nm / 38.3 - 151.1 ft-lbs | Speed: 555 r/min | Output Drive: 3/4" Square Drive | Weight: 6.50 kg / 14.33 lb | Length: 637 mm / 25.07 in | Side to Center: 29.5 mm / 1.16 in | Height: 62.0 mm / 2.44 in

Features:

• 1 million cycles maintenance-free when used within the recommended tool model torque range and clockwise rotation.
• Repeatability and accuracy with 2.0 Cm/Cmk at +/- 7% for controlled fastening on quality-critical joints.
• Over 25% lighter tool and cable system than the existing tool family, helping reduce handling effort during repetitive assembly work.
• Digital communication supports reliable performance between the tool and compatible NeoTek controller equipment.
• Internal temperature monitoring helps protect the tool during production use.
• Configurable LED light rings provide visual status feedback at the fastening station.
• Data logging with on-board tool memory supports process tracking and fastening history review.
• Preventive maintenance alerts help production teams schedule service before downtime interrupts the line.

Made in USA:

Applications:

• Heavy equipment assembly: Tightening larger bolts on frames, brackets, and structural components where controlled torque is required.
• Automotive and transportation production: Running down high-torque fasteners on assemblies that require repeatability and process feedback.
• Industrial manufacturing: Supporting production fastening cells using Cleco NeoTek controllers, tool cables, and data-driven tightening strategies.
• Rail, off-road, and machinery assembly: Applying controlled torque to larger joints where a right angle head improves access around fixtures and components.
• Quality-critical fastening: Used where transducer-controlled tightening, tool memory, and LED status feedback help operators confirm fastening results.

FAQs:

• Q: What does transducer control mean on this Cleco nutrunner?
  A: Transducer control means the tool uses an internal torque-sensing system to measure fastening output. This is used in production assembly where repeatability, accuracy, and fastening documentation are important.
• Q: What controller is compatible with the 70EAN205NA6?
  A: The manufacturer lists compatibility with the mPro400GCD-P controller. It is also listed for use with 961560-xxx tool cables and 961923-xxx tool extension cables.
• Q: Is this a right angle nutrunner?
  A: Yes. The 70EAN205NA6 is a right angle corded electric nutrunner, which helps operators reach fasteners near fixtures, frames, and other obstructions where a straight tool may not fit.
• Q: What size drive does this tool use?
  A: This model uses a 3/4" square drive. Match sockets and reaction tooling to the drive size, torque range, and the fastening application.
• Q: Is this tool appropriate for general repair or DIY use?
  A: No. This is a precision production fastening tool for controlled assembly systems, not a general-purpose impact wrench or shop repair tool. It requires compatible Cleco NeoTek control equipment and should be selected for engineered fastening processes.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com