Cleco 70EAN155NA6 NeoTek Corded Electric Nutrunner | 740 RPM | 28.7 - 115 (ft-lbs) Torque Range | 3/4" Square Drive

Built for controlled assembly fastening where access angle matters, the Cleco 70EAN155NA6 NeoTek Corded Electric Nutrunner delivers a 28.7–115 ft-lbs torque range with 740 RPM free speed for tightening larger production fasteners with electronic process control. Its 3/4" square drive accepts compatible industrial sockets, while the NeoTek platform supports repeatable fastening performance for manufacturing workstations that require torque verification, operator feedback, and production traceability.

This 70 Series corded electric nutrunner is part of Cleco’s precision assembly fastening family, built for applications where consistent tightening results matter more than breakaway force. Transducer control means torque is measured electronically during the fastening cycle, helping the fastening system confirm whether the joint reached the programmed target. With its lower speed and higher torque range compared with smaller NeoTek models, the 70EAN155NA6 is well suited for larger bolted joints in automotive, heavy equipment, rail, appliance, and general industrial assembly operations.

Type: Corded Electric Nutrunner | Brand: Cleco | Series: NeoTek 70 Series | Model: 70EAN155NA6 | Torque Range: 28.7–115 ft-lbs | Speed: 740 RPM | Output Drive: 3/4" Square Drive

Features:

• NeoTek corded electric fastening platform supports controlled tightening in production assembly environments.
• Transducer-controlled torque measurement helps verify fastening results on quality-sensitive joints.
• 3/4" square drive configuration supports compatible industrial sockets for medium-to-high torque assembly work.
• 740 RPM free speed provides controlled rundown for larger fasteners where torque accuracy is prioritized over maximum speed.
• Programmable operator feedback features may support visual, audible, and tactile fastening confirmation when used with compatible NeoTek system components.
• On-board tool intelligence supports fastening data, setup control, and maintenance planning within the NeoTek system.
• Corded electric power eliminates compressed-air dependency for production lines standardized around electric assembly tools.
• 70 Series torque capacity makes this model suitable for larger assemblies that exceed the range of lower-torque NeoTek tools.

Made in USA:

Applications:

• Automotive assembly: Controlled tightening of larger brackets, frame-related hardware, suspension-adjacent assemblies, and other bolted joints requiring torque verification.
• Heavy equipment manufacturing: Fastening guards, housings, panels, structural components, and machinery subassemblies where repeatable torque is required.
• Rail, bus, and specialty vehicle production: Assembly-line fastening with 3/4" drive sockets on larger hardware and torque-controlled joints.
• Appliance and equipment manufacturing: Repetitive fastening on larger assemblies where electronic feedback helps operators identify completed or rejected cycles.
• Industrial tool crib programs: Standardization or replacement within Cleco NeoTek corded electric fastening systems used across multiple workstations.

FAQs:

• Q: What is the Cleco 70EAN155NA6 used for?
  A: It is used for controlled production fastening where a specified torque must be applied repeatedly. It is intended for assembly tightening, not for removing seized bolts or replacing an impact wrench.
• Q: What does the 28.7–115 ft-lbs torque range mean?
  A: This is the working torque range the tool is intended to cover when properly configured in the NeoTek fastening system. Choose a tool whose recommended range places your target torque comfortably inside that window.
• Q: What does transducer control do on this tool?
  A: A transducer is an electronic measuring device that monitors torque during the fastening cycle. This helps the system confirm fastening results for quality control and traceability.
• Q: Does this model work with standard sockets?
  A: The tool uses a 3/4" square drive, so it should be paired with compatible 3/4" drive sockets and accessories. The socket and reaction setup should be rated for the fastening torque and production application.
• Q: Are the controller and cable included?
  A: The provided product information does not confirm included accessories. NeoTek corded electric nutrunners require compatible system components, so verify the controller, tool cable, extension cable, reaction equipment, and software requirements before ordering.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com