Cleco 70ESN185ND6 NeoTek Inline Corded Electric Nutrunner | 680 RPM | 33.9 - 135.7 (ft-lbs) Torque Range | 3/4" Square Drive

When a controlled fastening station needs higher torque capacity with straight-line tool alignment, the Cleco 70ESN185ND6 NeoTek Inline Corded Electric Nutrunner delivers a 33.9–135.7 ft-lbs torque range with 680 RPM free speed. This makes it a strong match for larger production fasteners that require measured tightening rather than impact force. The 3/4" square drive accepts compatible industrial sockets for assembly work where torque repeatability, process feedback, and fastening documentation are part of the build requirement.

As part of Cleco’s NeoTek 70 Series, this inline corded electric nutrunner is intended for precision assembly systems that rely on electronic torque control. Transducer control means torque is measured electronically during the fastening cycle, helping the system confirm whether each joint reached its programmed target. The inline configuration keeps the tool body aligned with the fastener axis, which is useful in fixtured workstations, vertical fastening positions, and assembly layouts where straight-on torque delivery supports consistent results.

Type: Inline Corded Electric Nutrunner | Brand: Cleco | Series: NeoTek 70 Series | Model: 70ESN185ND6 | Torque Range: 46–184 Nm / 33.9–135.7 ft-lbs | Speed: 680 RPM | Output Drive: 3/4" Square Drive

Features:

• NeoTek corded electric fastening platform supports controlled tightening for production assembly systems.
• Transducer-controlled torque measurement helps verify fastening results on quality-sensitive joints.
• 33.9–135.7 ft-lbs working range supports larger production fasteners within the NeoTek 70 Series lineup.
• 680 RPM free speed provides controlled rundown for higher-torque joints where fastening accuracy is more important than maximum speed.
• 3/4" square drive configuration supports compatible industrial sockets for medium-to-high torque assembly work.
• Inline body style helps keep the tool aligned with the fastener for straight-on torque delivery.
• Programmable operator feedback features may support visual, audible, and tactile fastening confirmation when paired with compatible NeoTek system components.
• On-board tool intelligence supports fastening data, setup control, and maintenance planning within the Cleco NeoTek system.

Made in USA:

Applications:

• Automotive and EV assembly: Controlled tightening of larger brackets, cradle components, battery tray hardware, and production joints that require torque verification.
• Heavy equipment manufacturing: Fastening housings, guards, panels, frames, and structural subassemblies where repeatable torque helps maintain build quality.
• Rail, bus, and specialty vehicle production: Assembly-line fastening with 3/4" drive sockets on larger hardware in torque-controlled workstations.
• Industrial machinery assembly: Installing medium-to-large fasteners on pumps, motors, fixtures, and machine bases where production traceability is required.
• Plant tool crib programs: Standardization or replacement within Cleco NeoTek corded electric fastening systems using 70 Series inline tools.

FAQs:

• Q: What is the Cleco 70ESN185ND6 used for?
  A: It is used for controlled production fastening on larger bolted joints. It is intended for assembly tightening with electronic torque control, not for removing seized fasteners or replacing an impact wrench.
• Q: How does this model compare with the 70ESN130ND6?
  A: The 70ESN185ND6 covers a higher torque range of 33.9–135.7 ft-lbs and runs at 680 RPM. The 70ESN130ND6 is faster at 1,000 RPM but covers the lower 22.8–91.4 ft-lbs range.
• Q: What does inline configuration mean?
  A: Inline means the tool body is arranged in line with the drive output. This helps keep force directed straight into the fastener and works well in fixtured, vertical, or overhead fastening positions where tool alignment is important.
• Q: What sockets fit this nutrunner?
  A: This model uses a 3/4" square drive, so it should be paired with compatible 3/4" drive sockets and accessories. Make sure sockets, extensions, and reaction fixtures are rated for the torque being applied.
• Q: Does this tool require a Cleco NeoTek controller?
  A: Yes, NeoTek corded electric nutrunners operate as part of a controlled fastening system and require compatible Cleco system components. Confirm the correct controller, cable, reaction equipment, and software requirements before purchase.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com