Cleco 70EAN600SA8T NeoTek Corded Electric Nutrunner | 190 RPM | 92 - 443 (ft-lbs) Torque Range | 1" Square Drive

When production fastening requires controlled torque on large bolted joints, the Cleco 70EAN600SA8T NeoTek Corded Electric Nutrunner gives assembly teams a high-torque electric solution for precision tightening without impact-style hammering. This 70 Series NeoTek tool delivers a 92 - 443 ft-lbs torque range, giving operators the capacity to tighten large fasteners while staying inside a programmed fastening process. Its 190 RPM speed supports controlled rundown before final torque, while the 1" square drive accepts compatible high-torque industrial sockets for production assembly work.

The 70EAN600SA8T is a transducer-controlled nutrunner, meaning the tool electronically measures torque to support fastening accuracy, repeatability, and traceability. Its right-angle head helps operators reach fasteners from the side or around obstructions where a straight inline tool may not fit. Configurable LED light rings, tactile and audible feedback, programmable multi-function buttons, and on-board intelligent memory help operators and quality teams monitor fastening status, tool setup, and maintenance cycles in production environments.

Type: Right Angle Corded Electric Nutrunner | Brand: Cleco | Series: NeoTek 70 Series | SKU: 70EAN600SA8T | Torque Range: 125 - 600 Nm / 92 - 443 ft-lbs | Speed: 190 RPM | Output Drive: 1" Square Drive | Weight: 10.8 kg / 23.9 lb | Length: 674 mm / 26.5 in | Side to Center: 55 mm / 2.1 in

Features:

• Repeatability and accuracy with 2.0 Cm/Cmk at +/- 7% for controlled fastening operations.
• Configurable LED light rings provide visual feedback for fastening status and operator prompts.
• Tactile and audible operator feedback helps confirm tool response during assembly cycles.
• Programmable multi-function buttons support process-specific tool setup and operator interaction.
• Maintenance-free brushless motor supports efficient electric fastening without routine brush replacement.
• Industry-proven gear trains support reliable performance in high-torque assembly applications.
• On-board intelligent memory chip records tool setup values and counts cycles for maintenance scheduling.
• Unique modular assembly design supports serviceability when repairs or maintenance are required.

Made in USA:

Applications:

• Heavy equipment assembly — tightening large mechanical fasteners on machinery frames, driveline components, and structural joints.
• Automotive and transportation production — controlled bolt-up work where torque feedback supports quality checks and repeatable assembly.
• Rail and off-highway manufacturing — fastening high-load joints on assemblies that require documented torque control.
• Industrial workstations — repeated production fastening where LED feedback, audible prompts, and programmable buttons help guide operators.
• Confined-access assembly — reaching side-access fasteners where the right-angle head is better suited than a straight inline tool.

FAQs:

• Q: What type of work is the Cleco 70EAN600SA8T used for?
  A: The 70EAN600SA8T is used for controlled high-torque assembly, not impact loosening. It is suited to production bolting where repeatability, torque traceability, and fastening feedback are important.
• Q: What does “right angle” mean on this nutrunner?
  A: A right-angle nutrunner has a 90-degree output head, allowing the operator to approach the fastener from the side. This is helpful when machine frames, fixtures, or adjacent components limit straight-line access.
• Q: What does transducer-controlled fastening mean?
  A: Transducer-controlled fastening means the tool electronically measures torque during the fastening cycle. This supports tighter process control than basic shut-off or operator-feel tightening methods.
• Q: Can this tool use standard 1" drive sockets?
  A: This model uses a 1" square drive, so it requires compatible 1" drive industrial sockets rated for the torque being applied. Always match the socket, fastener, reaction setup, and programmed torque to the application.
• Q: Are controller, cable, sockets, or reaction accessories included?
  A: The supplied product data identifies the tool and its core specifications, but does not confirm included accessories. Confirm controller, cable, socket, and reaction accessory requirements before ordering.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com