Built for industrial and mobile installations that have compressed air available for powered hose retrieval, the Coxreels 1125-4-200-A Motor Rewind Hose Reel stores up to 200 feet of 1/2-inch I.D. hose. The compressed air motor reduces the physical effort required to retrieve a long hose assembly, making this 1125 Series reel useful on service equipment, lubrication systems, maintenance vehicles, and stationary fluid-delivery stations. Its 3,000 PSI maximum working pressure supports compatible air, water, oil, lubrication, and hydraulic applications when the separately selected hose and fittings carry suitable pressure, temperature, and media ratings.
A direct gear drive transfers power from the air motor to the drum without a chain, providing smooth and quiet retraction. The low-profile outlet riser and open drum slot help the hose form a flat wrap instead of crimping near the connection point. Permanently lubricated, self-aligning pillow block bearings support steady drum rotation, while an adjustable tension brake helps control free-wheeling during operation. The one-piece welded steel A-frame provides a rigid base for fixed or vehicle-mounted installations.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Rewind Method: Compressed Air Motor with Direct Gear Drive | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 200 ft | Max Pressure: 3,000 PSI | Hose Included: No | Overall Dimensions: 23" W x 19.25" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base Dimensions: 17.38" X x 16" Y
Features:
- Compressed air motor provides powered hose retrieval where a shop-air or vehicle-mounted pneumatic supply is available.
- Direct gear drive delivers smooth and quiet retraction without a chain-drive mechanism.
- One-piece, all-welded steel A-frame construction provides a rigid mounting platform for mobile and stationary installations.
- Machined solid brass 90° full-flow NPT swivel with nitrile seals supports efficient fluid transfer and simplified seal maintenance.
- Low-profile outlet riser and open drum slot promote a flat, non-crimping hose wrap during payout and retrieval.
- Permanently lubricated self-aligning bearings, an adjustable tension brake, and a locking pin support controlled drum operation and secure storage.
Made in USA: 
Applications:
- Industrial maintenance departments managing long air, water, oil, or compatible hydraulic hose assemblies.
- Mobile lubrication and service equipment equipped with a compressed-air supply.
- Fleet, construction, and agricultural maintenance vehicles requiring powered hose retrieval.
- Manufacturing facilities supplying compatible fluids to machinery, work cells, and maintenance areas.
- Equipment skids and trailers where manual retrieval of 200 feet of hose would be time-consuming.
FAQs:
- Q: Does the Coxreels 1125-4-200-A include hose?
A: No. This model is supplied as a reel only. The selected hose must have a 1/2-inch inside diameter, a maximum outside diameter of 7/8 inch, and suitable pressure and media ratings. - Q: What does the 'A' suffix indicate?
A: The 'A' identifies a compressed air motor rewind configuration. The motor powers the reel's direct gear drive so the hose can be retrieved without manual cranking. - Q: Does this motorized reel use a chain drive?
A: No. The 1125 Series motorized reel uses a direct gear drive, which provides smooth and quiet retraction without a chain. - Q: Can the reel operate at the full 3,000 PSI rating with any hose?
A: No. The complete assembly is limited by its lowest-rated component. Verify that the hose, fittings, connectors, and fluid-path components are compatible with the operating pressure, temperature, and media.
| LESS HOSE | SIZE INDEX |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | HP SKU | HP PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-200 | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-A | 5,000 | 39 | 2 |
| 1125-4-200-A | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-AB | 5,000 | 39 | 2 |
| 1125-4-200-AB | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-C | 5,000 | 39 | 2 |
| 1125-4-200-C | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-E | 5,000 | 39 | 2 |
| 1125-4-200-E | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-EA | 5,000 | 39 | 2 |
| 1125-4-200-EA | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-EB | 5,000 | 39 | 2 |
| 1125-4-200-EB | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-ED | 5,000 | 39 | 2 |
| 1125-4-200-EF | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-EF | 5,000 | 39 | 2 |
| 1125-4-200-ED | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-H | 5,000 | 39 | 2 |
| 1125-4-200-H | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200 | 5,000 | 39 | 2 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
- Type
- Motor Rewind Hose Reel
- Series
- 1125 Series
- Hose Inside Diameter (in.)
- 1/2
- Hose Outside Diameter (in.)
- 7/8
- Hose Length (ft.)
- 200
- Hose Included
- No
- Maximum Working Pressure (PSI)
- 3000
- Width (in.)
- 23
- Height (in.)
- 19.25
- Length (in.)
- 17.63
- Mounting Pattern (in.)
- 15.44M
- Mounting Pattern (in.)
- 10N
- Base (in.)
- 17.38X
- Base (in.)
- 16Y
This product hasn't received any reviews yet. Be the first to review this product!