For mobile service equipment and industrial installations that require higher-powered DC hose retrieval, the Coxreels 1125-4-200-ED Electric Motor Rewind Hose Reel stores up to 200 feet of 1/2-inch I.D. hose and uses a 12V DC, 1/2 HP motor to rewind the drum. This 1125 Series configuration is suited to service trucks, utility vehicles, trailers, and machinery powered by a compatible 12V electrical system. Its 3,000 PSI maximum working pressure supports compatible air, water, oil, lubrication, and hydraulic applications when the separately installed hose, fittings, and accessories carry appropriate ratings.
The motor powers a direct gear drive, transferring force to the drum without a chain for smooth, quiet hose retrieval. Compared with the 1/3 HP electric configuration, the 1/2 HP motor provides additional rewind power for installations where hose weight, operating conditions, or duty requirements call for the higher-output option. A low-profile outlet riser encourages an even hose wrap, while permanently lubricated self-aligning pillow block bearings and an adjustable tension brake help maintain controlled drum movement.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric DC Motor Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Motor: 12V DC, 1/2 HP | Drive: Direct Gear Drive | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 200 ft | Max Pressure: 3,000 PSI | Swivel Inlet: 1/2" Female NPT | Outlet Riser: 1/2" Female NPT | Overall Dimensions: 23" W x 19.25" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base Dimensions: 17.38" X x 16" Y
Features:
- 12V DC, 1/2 HP electric motor provides powered hose retrieval from a compatible vehicle or equipment electrical system.
- Direct gear drive delivers smooth and quiet retraction without a chain-drive mechanism.
- One-piece, all-welded steel A-frame construction creates a rigid mounting platform for mobile and stationary installations.
- Machined solid brass 90° full-flow NPT swivel with nitrile seals supports efficient fluid transfer and serviceable seal replacement.
- Low-profile outlet riser and open drum slot promote a flat, non-crimping hose wrap during payout and rewind.
- Permanently lubricated self-aligning bearings, an adjustable tension brake, and a locking pin support controlled operation and secure transport.
Made in USA: 
Applications:
- Fleet and utility service trucks using onboard 12V DC power for field hose retrieval.
- Mobile lubrication and hydraulic service equipment handling compatible fluids.
- Construction and agricultural maintenance vehicles requiring up to 200 feet of hose reach.
- Equipment trailers and machinery skids where powered rewind reduces manual hose handling.
- Industrial maintenance installations requiring a higher-output DC motor rewind configuration.
FAQs:
- Q: Does the Coxreels 1125-4-200-ED include hose?
A: No. This model is supplied as a reel only. Install a compatible 1/2-inch I.D. hose with an outside diameter no greater than 7/8 inch and suitable pressure, temperature, and media ratings. - Q: What does the ED suffix indicate?
A: The ED suffix identifies the 12V DC, 1/2 HP electric motor rewind option. The motor powers the reels direct gear drive for hose retrieval. - Q: How does the ED model differ from the 1125-4-200-E?
A: The ED model uses a 1/2 HP motor, while the E configuration uses a 1/3 HP motor. The ED reel also has a listed weight of 65 pounds compared with 52 pounds for the E model. - Q: Can this reel operate at the full 3,000 PSI rating?
A: Yes, provided every component in the installed hose assembly is rated for the intended pressure. The complete system is limited by its lowest-rated hose, fitting, connector, or accessory.
| LESS HOSE | SIZE INDEX |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | HP SKU | HP PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-200 | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-A | 5,000 | 39 | 2 |
| 1125-4-200-A | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-AB | 5,000 | 39 | 2 |
| 1125-4-200-AB | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-C | 5,000 | 39 | 2 |
| 1125-4-200-C | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-E | 5,000 | 39 | 2 |
| 1125-4-200-E | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-EA | 5,000 | 39 | 2 |
| 1125-4-200-EA | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-EB | 5,000 | 39 | 2 |
| 1125-4-200-EB | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-ED | 5,000 | 39 | 2 |
| 1125-4-200-EF | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-EF | 5,000 | 39 | 2 |
| 1125-4-200-ED | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200-H | 5,000 | 39 | 2 |
| 1125-4-200-H | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | HP1125-4-200 | 5,000 | 39 | 2 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
