Built for fixed industrial installations that require AC-powered hose retrieval, the Coxreels 1125-4-100-EA Electric Motor Rewind Hose Reel stores up to 100 feet of 1/2-inch I.D. hose and uses a 115V AC, 1/2 HP reversible motor to rewind the drum. This 1125 Series reel reduces the effort required to retrieve long hose assemblies in manufacturing plants, maintenance departments, lubrication stations, and processing equipment installations. Its 3,000 PSI maximum working pressure supports compatible air, water, oil, lubrication, and hydraulic fluid applications when the separately installed hose, fittings, and accessories carry appropriate ratings.
The motor powers a direct gear drive, which transfers rewind force to the drum without a chain for smooth and quiet operation. A low-profile outlet riser and open drum slot encourage a flat hose wrap while reducing sharp bends near the connection point. Permanently lubricated self-aligning pillow block bearings support consistent drum rotation, and an adjustable tension brake helps limit unwanted free-wheeling during payout. The one-piece welded steel A-frame provides a rigid mounting base for stationary equipment and plant hose-management systems.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric AC Motor Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Motor: 115V AC, 1/2 HP Reversible Motor | Drive: Direct Gear Drive | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 100 ft | Max Pressure: 3,000 PSI | Swivel Inlet: 1/2" Female NPT | Outlet Riser: 1/2" Female NPT | Overall Dimensions: 19.75" W x 19.25" H x 17.63" L | Mounting Pattern: 9.44" M x 10" N | Base Dimensions: 11.38" X x 16" Y
Features:
- 115V AC, 1/2 HP reversible motor provides powered hose retrieval from a compatible fixed electrical supply.
- Direct gear drive delivers smooth and quiet retraction without a chain-drive mechanism.
- One-piece, all-welded 12-gauge steel A-frame construction creates a rigid mounting platform.
- Machined solid brass 90° full-flow NPT swivel with nitrile seals supports efficient fluid transfer and serviceable seal replacement.
- Low-profile outlet riser and open drum slot promote a flat, non-crimping hose wrap during payout and rewind.
- Permanently lubricated self-aligning bearings and an adjustable tension brake support smooth, controlled drum movement.
Made in USA: 
Applications:
- Industrial maintenance departments managing air, water, oil, or compatible fluid hose.
- Manufacturing and processing facilities equipped with compatible 115V AC electrical service.
- Lubrication and hydraulic service stations requiring powered hose retrieval.
- Machinery skids and fixed equipment installations where manual rewind would slow routine work.
- Compact plant installations where 100 feet of 1/2-inch hose provides sufficient operating reach.
FAQs:
- Q: Does the Coxreels 1125-4-100-EA include hose?
A: No. This model is supplied as a reel only. Install a compatible 1/2-inch I.D. hose with an outside diameter no greater than 7/8 inch and suitable pressure, temperature, bend-radius, and media ratings. - Q: What does the 'EA' suffix indicate?
A: The EA suffix identifies the 115V AC, 1/2 HP reversible electric motor configuration. The motor powers the reel's direct gear drive for hose retrieval. - Q: How does this reel differ from the 1125-4-100-E?
A: The EA model uses a 115V AC, 1/2 HP motor, while the E model uses a 12V DC, 1/3 HP motor. The correct choice depends on the available electrical supply and installation requirements. - Q: Can this reel operate at the full 3,000 PSI rating?
A: Yes, provided the installed hose, fittings, connectors, and every other component in the fluid path are rated for the intended pressure. The completed assembly is limited by its lowest-rated component.
| LESS HOSE | SIZE INDEX |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | HP SKU | HP PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-100 | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100 | 5,000 | 36 | 1 |
| 1125-4-100-A | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-A | 5,000 | 36 | 1 |
| 1125-4-100-AB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-AB | 5,000 | 36 | 1 |
| 1125-4-100-C | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-C | 5,000 | 36 | 1 |
| 1125-4-100-E | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-E | 5,000 | 36 | 1 |
| 1125-4-100-EA | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EA | 5,000 | 36 | 1 |
| 1125-4-100-EB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EB | 5,000 | 36 | 1 |
| 1125-4-100-ED | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-ED | 5,000 | 36 | 1 |
| 1125-4-100-EF | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EF | 5,000 | 36 | 1 |
| 1125-4-100-H | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-H | 5,000 | 36 | 1 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
