Mobile service trucks, portable hydraulic test units, and field equipment running 12-volt DC electrical systems sometimes need hose reel capabilities beyond what standard 3,000 PSI reels provide high-pressure hydraulic test lines, oilfield service hose, and elevated-pressure fluid delivery applications that require a 5,000 PSI rated reel with automatic motorized retraction powered from the vehicle battery. The Coxreels HP1125-4-100-E pairs the HP1125 Series high-pressure frame with a 12V DC, 1/3 HP electric motor (a direct-current rewind drive that connects to a standard 12V vehicle or equipment battery system, delivering automatic drum retraction without a shop air supply or AC outlet at the reel) and direct gear drive (no chain gears engage the drum directly for quiet, smooth retraction without chain stretch or lubrication intervals). The electroless nickel plated steel 90° NPT swivel hardened for 5,000 PSI service over the brass swivel on standard 1125 models pairs with AFLAS seals for the chemical and heat resistance that high-pressure petroleum, hydraulic fluid, and chemical service environments demand. For mobile platforms that already carry 5,000 PSI capable hose but need automatic retraction without running separate air lines or AC circuits to the reel, the HP1125-4-100-E integrates directly into the vehicle's existing 12V electrical architecture.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: HP1125 | Motor Type: 12V DC, 1/3 HP | Drive: Direct Gear Drive (No Chain) | Hose I.D. (in.): 1/2 | Hose O.D. (in.): 7/8 | Hose Length (ft.): 100 | Hose Included: No | Max PSI: 5,000 | Swivel: Electroless Nickel Plated Steel 90° NPT | Swivel Seals: AFLAS
Features:
- 12V DC, 1/3 HP electric motor with direct gear drive connects directly to 12V vehicle or equipment battery systems; no shop air supply or AC outlet required at the reel for automatic drum retraction
- Direct gear drive no chain or sprocket; engages the drum directly for quiet, smooth retraction without chain slack, stretch, or lubrication requirements
- Electroless nickel plated steel 90° full-flow NPT swivel inlet hardened swivel construction rated for 5,000 PSI service; greater pressure capability and corrosion resistance than the brass swivel on standard 1125 Series models
- AFLAS swivel seals fluoroelastomer compound with superior chemical and heat resistance over Nitrile seals, suited to hydraulic fluid, petroleum, chemical, and high-pressure steam service
- Exclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap around the drum
- Heavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safety
- Sturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, vehicle-body, or ceiling installation
- Permanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation over extended service life
- Adjustable tension brake prevents free-wheeling during hose deployment; long-handled locking pin secures drum during transport or storage
- Long-lasting chip-resistant, rust-inhibiting CPC powder coat finish; 2-year manufacturer's limited warranty
Made in USA: 
Applications:
- Mobile hydraulic test & service vehicles 12V trucks and portable test units carrying 5,000 PSI capable hydraulic test hose where automatic reel retraction from the vehicle battery replaces manual crank operation between tests
- Oilfield & well service mobile equipment 12V service trucks and field equipment handling chemical injection lines, stimulation fluid hose, and high-pressure service applications where both the 5,000 PSI rating and 12V DC integration are required
- High-pressure washing & water jetting vehicles 12V mobile pressure washing and water jetting trucks where working pressures exceed 3,000 PSI and automatic reel retraction from the vehicle's electrical system reduces operator handling time
- Agricultural & field service equipment 12V tractors and self-propelled service units handling high-pressure fluid lines where the HP1125 pressure rating is required and 12V DC motor integration suits the vehicle electrical architecture
- Fixed plant installations with 12V DC power maintenance stations and test facilities with 12V DC infrastructure where 5,000 PSI service lines require an overhead reel rated beyond the standard 1125's 3,000 PSI ceiling
FAQs:
- Q: What is the difference between the HP1125-4-100-E and the standard 1125-4-100-E?
A: Both use a 12V DC, 1/3 HP electric motor on the same basic chassis with direct gear drive. The difference is working pressure and swivel specification. The HP1125-4-100-E is rated to 5,000 PSI with an electroless nickel plated steel swivel and AFLAS seals. The standard 1125-4-100-E is rated to 3,000 PSI with a machined brass swivel and Nitrile seals. For applications at or below 3,000 PSI, the standard 1125-4-100-E is the more economical choice; for applications requiring up to 5,000 PSI, the HP1125-4-100-E is required. - Q: What is the difference between the HP1125-4-100-E (12V DC electric) and the HP1125-4-100-A (compressed air motor)?
A: Both provide automatic drum retraction on the HP1125 Series 5,000 PSI high-pressure frame, but the power source differs. The -E motor runs on 12V DC from a vehicle or equipment battery suited to mobile platforms without a shop air supply at the reel. The -A motor runs on compressed air from your existing shop air system suited to fixed installations where shop air is already available at the mount point. The reel frame, pressure rating, swivel, and seals are identical between the two; the choice comes down entirely to which power source is available and preferred at the installation location. - Q: Is the 12V DC motor on this reel reversible?
A: Confirm reversibility against the 2021 Coxreels catalog for the HP1125-E specifically. Across the standard 1125 and 1175 Series, the -E suffix has been listed as reversible in the Coxreels motor options chart but the HP1125 Series motor options chart should be verified directly to confirm whether the same applies to the high-pressure variant before publishing this answer. - Q: What electrical connection does the 12V DC motor require?
A: The motor connects to a 12V DC power source typically a vehicle battery system, auxiliary battery, or DC power supply. Coxreels does not publish the exact amperage draw for this motor. Confirm current requirements and circuit fusing with a qualified electrician sized for sustained motor operation before installation. - Q: Does the reel come with hose included?
A: No the HP1125-4-100-E ships less hose. The drum accepts 1/2" ID / 7/8" OD hose up to 100 feet. Select hose with a working pressure rating at or above your system pressure (up to 5,000 PSI) and rated for your specific media. At 5,000 PSI, use hose assemblies with fittings rated and crimped for high-pressure service hose and fitting selection at this pressure is a critical safety consideration.
| LESS HOSE | SIZE INDEX |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | HP SKU | HP PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-100 | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100 | 5,000 | 36 | 1 |
| 1125-4-100-A | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-A | 5,000 | 36 | 1 |
| 1125-4-100-AB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-AB | 5,000 | 36 | 1 |
| 1125-4-100-C | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-C | 5,000 | 36 | 1 |
| 1125-4-100-E | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-E | 5,000 | 36 | 1 |
| 1125-4-100-EA | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EA | 5,000 | 36 | 1 |
| 1125-4-100-EB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EB | 5,000 | 36 | 1 |
| 1125-4-100-ED | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-ED | 5,000 | 36 | 1 |
| 1125-4-100-EF | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EF | 5,000 | 36 | 1 |
| 1125-4-100-H | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-H | 5,000 | 36 | 1 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
