Large commercial vehicles, heavy construction equipment, and transit fleet platforms running 24-volt DC electrical systems sometimes carry hose lines that exceed what a 3,000 PSI reel can handle: hydraulic test hose, high-pressure fluid delivery lines, and oilfield service applications where the working pressure demands a 5,000 PSI capable reel with automatic retraction powered from the vehicle battery. The Coxreels HP1125-4-100-EB pairs the HP1125 Series high-pressure frame with a 24V DC, 1/2 HP electric motor (a direct-current rewind drive with full 1/2 HP output, connecting to a standard 24V vehicle or equipment battery system and delivering automatic drum retraction without a shop air supply or AC outlet at the reel) and direct gear drive (no chain gears engage the drum directly for quiet, smooth retraction without chain stretch or lubrication intervals). The electroless nickel-plated steel 90° NPT swivel hardened for 5,000 PSI service over the brass swivel on standard 1125 models pairs with AFLAS seals for the chemical and heat resistance that high-pressure petroleum, hydraulic fluid, and chemical service demands. For 24V mobile platforms that already run high-pressure hose to the work point and need automatic reel retraction that integrates directly into the vehicle's existing electrical architecture, the HP1125-4-100-EB steps the standard 1125 Series' 24V motorized capability up to the 5,000 PSI pressure class.
Type: Electric Motor Rewind Hose Reel | Series: HP1125 | Motor Type: 24V DC, 1/2 HP | Drive: Direct Gear Drive (No Chain) | Hose I.D. (in.): 1/2 | Hose O.D. (in.): 7/8 | Hose Length (ft.): 100 | Hose Included: No | Max PSI: 5,000 | Swivel: Electroless Nickel Plated Steel 90° NPT | Swivel Seals: AFLAS
Features
- 24V DC, 1/2 HP electric motor with direct gear drive connects directly to 24V vehicle or equipment battery systems; no shop air supply or AC outlet required at the reel for automatic drum retraction
- Full 1/2 HP motor output higher torque than the 1/3 HP -EF variant, suited to installations with longer hose routing friction, heavier fluid-loaded hose, or higher retraction cycle frequency
- Direct gear drive no chain or sprocket; engages the drum directly for quiet, smooth retraction without chain slack, stretch, or lubrication requirements
- Electroless nickel plated steel 90° full-flow NPT swivel inlet hardened swivel construction rated for 5,000 PSI service; greater pressure capability and corrosion resistance than the brass swivel on standard 1125 Series models
- AFLAS swivel seals fluoroelastomer compound with superior chemical and heat resistance over Nitrile seals, suited to hydraulic fluid, petroleum, chemical, and high-pressure steam service
- Exclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap around the drum
- Heavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safety
- Sturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, vehicle-body, or ceiling installation
- Permanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation over extended service life
- Adjustable tension brake prevents free-wheeling during hose deployment; long-handled locking pin secures drum during transport or storage; long-lasting chip-resistant, rust-inhibiting CPC powder coat finish
Made in USA: 
Applications
- Mobile hydraulic test & service vehicles 24V heavy trucks and portable test units carrying 5,000 PSI hydraulic test hose where the vehicle's 24V electrical system powers automatic reel retraction and the HP1125 pressure rating covers the test line working pressure
- Heavy construction equipment service trucks 24V service vehicles maintaining hydraulic-heavy construction machinery where high-pressure fluid delivery hose requires a 5,000 PSI capable reel with automatic 24V-powered retraction
- Oilfield & well service mobile equipment 24V trucks handling high-pressure chemical injection lines and stimulation fluid hose in oilfield service applications where both the elevated pressure rating and 24V DC motor integration are required
- Municipal & commercial fleet high-pressure service transit buses, refuse vehicles, and utility fleet on 24V systems where service lines at elevated pressures benefit from the HP1125 pressure rating over the standard 1125's 3,000 PSI ceiling
- Fixed plant & facility installations with 24V DC infrastructure maintenance stations and test facilities running 24V DC power where 5,000 PSI service lines require a motorized reel beyond the pressure capability of standard 1125 Series models
FAQs
Q: What is the difference between the HP1125-4-100-EB and the standard 1125-4-100-EB?
A: Both use a 24V DC, 1/2 HP electric motor on the same basic chassis with direct gear drive. The difference is working pressure and swivel specification. The HP1125-4-100-EB is rated to 5,000 PSI with an electroless nickel plated steel swivel and AFLAS seals. The standard 1125-4-100-EB is rated to 3,000 PSI with a machined brass swivel and Nitrile seals. For 24V applications at or below 3,000 PSI, the standard 1125-4-100-EB is the more economical choice; for applications requiring up to 5,000 PSI, the HP1125-4-100-EB is required.
Q: What is the difference between the HP1125-4-100-EB and the HP1125-4-100-E?
A: Both provide automatic electric motor retraction on the HP1125 Series 5,000 PSI frame, but differ in voltage and output. The -E is 12V DC, 1/3 HP suited to light-to-medium service trucks and equipment running standard 12V electrical systems. The -EB is 24V DC, 1/2 HP suited to larger commercial vehicles, heavy equipment, and transit platforms running 24V systems, with higher motor torque for heavier hose routing demands. The reel frame, pressure rating, swivel, and seals are identical between the two; the choice comes down to the vehicle or equipment electrical architecture.
Q: What is the difference between the HP1125-4-100-EB and the HP1125-4-100-EF?
A: Both are 24V DC motors on the HP1125 Series 5,000 PSI frame, but the -EB is 1/2 HP and the -EF is 1/3 HP. The 1/2 HP -EB delivers more torque at the drum useful when hose routing introduces friction through a service body bulkhead, over a long horizontal run, or on high-frequency retraction cycles. For straightforward overhead drop installations with minimal routing friction and moderate cycle frequency, the lighter 1/3 HP -EF draws less current and is typically adequate.
Q: What electrical connection does the 24V DC motor require?
A: The motor connects to a 24V DC power source typically a vehicle battery system, auxiliary battery, or DC power supply. Coxreels does not publish the exact amperage draw for this motor. Confirm current requirements, circuit fusing, and wiring gauge with a qualified electrician sized for sustained motor operation before installation.
Q: Does the reel come with hose included?
A: No the HP1125-4-100-EB ships less hose. The drum accepts 1/2" ID / 7/8" OD hose up to 100 feet. Select hose with a working pressure rating at or above your system pressure (up to 5,000 PSI), rated for your specific media, and compatible with the electroless nickel plated steel swivel and AFLAS seals. At 5,000 PSI, use hose assemblies with fittings rated and crimped for high-pressure service.
| LESS HOSE | SIZE INDEX |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | HP SKU | HP PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-100 | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100 | 5,000 | 36 | 1 |
| 1125-4-100-A | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-A | 5,000 | 36 | 1 |
| 1125-4-100-AB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-AB | 5,000 | 36 | 1 |
| 1125-4-100-C | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-C | 5,000 | 36 | 1 |
| 1125-4-100-E | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-E | 5,000 | 36 | 1 |
| 1125-4-100-EA | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EA | 5,000 | 36 | 1 |
| 1125-4-100-EB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EB | 5,000 | 36 | 1 |
| 1125-4-100-ED | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-ED | 5,000 | 36 | 1 |
| 1125-4-100-EF | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EF | 5,000 | 36 | 1 |
| 1125-4-100-H | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-H | 5,000 | 36 | 1 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
