Large commercial vehicles, heavy equipment, and industrial platforms running 24-volt DC electrical systems need a hose reel motor that draws from the battery system directly, no shore power, no compressed air at the motor, no step-down transformer. The Coxreels 1125-4-100-EB delivers motorized retraction for 100 feet of 1/2-inch ID hose at 3,000 PSI through a 24V DC, 1/2 HP reversible motor (a direct-current drive with full 1/2 HP output and powered operation in both pay-out and retraction directions, connecting to a standard 24V vehicle or equipment battery system) on the compact 1125 Series chassis. The direct gear drive (no chain, the motor engages the drum through gears directly, for quiet, smooth retraction without chain stretch or lubrication intervals) keeps the mechanism simple and the operation steady across production use cycles. A machined solid brass 90° NPT swivel, permanently lubricated pillow block bearings, CNC-spun ribbed discs, and the all-welded 12-gauge steel A-frame bring 1125 Series production construction to a 24V motorized format suited to transit maintenance, municipal fleet, heavy construction equipment service, and any 24V platform where 1/2-inch hose automatic retraction is part of the daily workflow.
Type: Electric Motor Rewind Hose Reel | Series: 1125 | Motor Type: 24V DC, 1/2 HP, Reversible | Drive: Direct Gear Drive (No Chain) | Hose I.D. (in.): 1/2 | Hose O.D. (in.): 7/8 | Hose Length (ft.): 100 | Hose Included: No | Max PSI: 3,000 | Swivel: Machined Solid Brass 90° NPT | Swivel Seals: Nitrile | Width (in.): 19.75 | Height (in.): 19.25 | Length (in.): 17.63 | Mounting Pattern M (in.): 9.44 | Mounting Pattern N (in.): 10 | Base X (in.): 11.38 | Base Y (in.): 16
Features
- 24V DC, 1/2 HP reversible motor connects directly to 24V vehicle or equipment battery systems; no AC outlet or compressed air supply required at the reel
- Reversible motor operation powered control in both pay-out and retraction directions, enabling remote deployment and retrieval from a cab or service body switch
- Direct gear drive no chain or sprocket; engages the drum directly for quiet, smooth retraction without chain slack, stretch, or lubrication requirements
- Machined solid brass 90° full-flow NPT swivel inlet standard on 1/2" and 3/4" 1125 Series models; no need to remove the reel from its mount for seal maintenance or hose installation
- Exclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap around the drum
- Heavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safety
- Sturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, vehicle-body, or ceiling installation
- Permanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation over extended service life
- Adjustable tension brake prevents free-wheeling during hose deployment; long-handled locking pin secures drum during transport or storage
- Long-lasting chip-resistant, rust-inhibiting CPC powder coat finish; 2-year manufacturer's limited warranty
Made in USA: 
Applications
- Heavy truck & transit fleet maintenance large commercial vehicles and transit buses running 24V systems where automatic retraction of 1/2-inch air or fluid hose integrates directly into the vehicle electrical architecture
- Construction equipment service bodies heavy construction machinery service trucks on 24V platforms where powered bidirectional hose control from a remote switch reduces operator handling during fluid delivery and tool supply
- Agricultural equipment & large tractor service 24V tractors and self-propelled service units where 100 feet of 1/2-inch hose reach covers wide equipment service areas and reversible motorized control replaces manual pull-out
- Municipal & utility fleet operations street sweepers, refuse vehicles, and utility trucks on 24V systems where hose retraction integrates into the vehicle body electrical system at the service point
- Fixed plant installations with 24V DC infrastructure large-bay maintenance facilities, bus depots, and fleet service centers running 24V DC control systems where the compact 1125 Series chassis fits tighter overhead clearances than larger-frame reels
FAQs
Q: What is the difference between the 1125-4-100-EB and the 1125-4-100-EF?
A: Both are 24V DC reversible motors, but the -EB is 1/2 HP and the -EF is 1/3 HP. The 1/2 HP motor on the -EB delivers more torque at the drum, which is useful in installations where the hose routing introduces friction long service body runs, hose through bulkheads, or heavier fluid-loaded hose. For straightforward overhead drop installations with minimal routing friction, the lighter 1/3 HP -EF motor is typically adequate and draws less current from the vehicle battery.
Q: What is the difference between the 1125-4-100-EB and the 1175-6-100-EB?
A: The motor specifications are the same 24V DC, 1/2 HP, reversible but the reel series differs. The 1125-4-100-EB is a smaller-chassis reel for 1/2-inch ID hose on a compact frame with direct gear drive and a machined brass swivel. The 1175-6-100-EB is a larger-chassis reel for 1-inch ID hose with chain and sprocket drive and a nickel-plated steel swivel with AFLAS seals. Choose the 1125 for 1/2-inch hose applications; choose the 1175 for 1-inch hose applications requiring higher flow volume.
Q: What electrical connection does the 24V DC motor require?
A: The motor connects to a 24V DC power source typically a vehicle battery system, auxiliary battery, or DC power supply. Coxreels does not publish the exact amperage draw for this motor. Confirm current requirements, circuit fusing, and wiring gauge with a qualified electrician sized for sustained bidirectional operation before installation.
Q: Does the reel come with hose included?
A: No the 1125-4-100-EB ships less hose. The drum accepts 1/2" ID / 7/8" OD hose up to 100 feet. Select hose rated for your working pressure and media (air, water, oil, or other compatible fluids at up to 3,000 PSI) and install it on the drum before use.
Q: Can this reel handle fluids other than air?
A: Yes models supplied less hose can be used for air, water, or oil service at up to 3,000 PSI. The machined brass swivel and Nitrile seals are compatible with petroleum-based oils and water but have limited resistance to some synthetic hydraulic fluids and solvents. Confirm seal compatibility with your specific fluid before installation if there is any question.
| LESS HOSE | SIZE INDEX |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | HP SKU | HP PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-100 | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100 | 5,000 | 36 | 1 |
| 1125-4-100-A | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-A | 5,000 | 36 | 1 |
| 1125-4-100-AB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-AB | 5,000 | 36 | 1 |
| 1125-4-100-C | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-C | 5,000 | 36 | 1 |
| 1125-4-100-E | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-E | 5,000 | 36 | 1 |
| 1125-4-100-EA | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EA | 5,000 | 36 | 1 |
| 1125-4-100-EB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EB | 5,000 | 36 | 1 |
| 1125-4-100-ED | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-ED | 5,000 | 36 | 1 |
| 1125-4-100-EF | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EF | 5,000 | 36 | 1 |
| 1125-4-100-H | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-H | 5,000 | 36 | 1 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
