For mobile and stationary installations that use compressed air to power hose retrieval, the Coxreels 1125-4-100-A Motor Rewind Hose Reel manages up to 100 feet of 1/2-inch I.D. hose without requiring manual cranking. This 1125 Series model is suited to service vehicles, lubrication equipment, maintenance areas, and machinery skids where a pneumatic supply is already available. Its 3,000 PSI maximum working pressure supports compatible air, water, oil, lubrication, and hydraulic fluid applications when the separately installed hose, fittings, and other fluid-path components carry the appropriate ratings.
The compressed air motor operates a direct gear drive, transferring rewind power to the drum without a chain for smooth and quiet retrieval. A low-profile outlet riser and open drum slot help the hose form a flat wrap while reducing sharp bends near the connection. Permanently lubricated self-aligning pillow block bearings support consistent drum rotation, while an adjustable tension brake helps limit uncontrolled free-wheeling during payout. The all-welded steel A-frame provides a rigid mounting base within a compact 17-inch-wide footprint.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Rewind Method: Compressed Air Motor | Drive: Direct Gear Drive | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 100 ft | Max Pressure: 3,000 PSI | Swivel Inlet: 1/2" Female NPT | Outlet Riser: 1/2" Female NPT |Overall Dimensions: 17" W x 18.75" H x 17.63" L | Mounting Pattern: 9.44" M x 10" N | Base Dimensions: 11.38" X x 16" Y
Features:
- Compressed air motor provides powered hose retrieval where a compatible pneumatic supply is available.
- Direct gear drive delivers smooth, quiet drum operation without a chain-drive mechanism.
- One-piece, all-welded steel A-frame creates a rigid mounting platform for mobile and stationary installations.
- Machined solid brass 90° full-flow NPT swivel with nitrile seals supports efficient fluid transfer and serviceable seal replacement.
- Low-profile outlet riser and open drum slot promote a flat, non-crimping hose wrap during payout and retrieval.
- Permanently lubricated self-aligning bearings and an adjustable tension brake support smooth, controlled drum movement.
Made in USA: 
Applications:
- Industrial maintenance areas managing air, water, oil, or compatible hydraulic hose.
- Mobile lubrication and service equipment equipped with a compressed-air supply.
- Fleet, construction, and agricultural maintenance vehicles requiring powered hose retrieval.
- Manufacturing workstations supplying compatible fluids to machinery and production equipment.
- Equipment skids and compact installations where the 100-foot capacity provides sufficient working reach.
FAQs:
- Q: Does the Coxreels 1125-4-100-A include hose?
A: No. This model is supplied as a reel only. Install a compatible 1/2-inch I.D. hose with an outside diameter no greater than 7/8 inch and suitable pressure, temperature, and media ratings. - Q: What does the 'A' suffix indicate?
A: The A suffix identifies the compressed air motor rewind configuration. The motor powers the direct gear drive so the hose can be retrieved without manual cranking. - Q: How does this reel differ from the 1125-4-200-A?
A: The 1125-4-100-A stores 100 feet of 1/2-inch hose, compared with 200 feet for the 1125-4-200-A. Its shorter drum reduces the overall width to 17 inches and the listed weight to 44 pounds. - Q: Can this reel operate at the full 3,000 PSI rating?
A: Yes, provided the installed hose, fittings, connectors, and every other component in the fluid path are rated for the intended pressure. The completed assembly is limited by its lowest-rated component.
| LESS HOSE | SIZE INDEX |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | HP SKU | HP PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-100 | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100 | 5,000 | 36 | 1 |
| 1125-4-100-A | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-A | 5,000 | 36 | 1 |
| 1125-4-100-AB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-AB | 5,000 | 36 | 1 |
| 1125-4-100-C | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-C | 5,000 | 36 | 1 |
| 1125-4-100-E | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-E | 5,000 | 36 | 1 |
| 1125-4-100-EA | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EA | 5,000 | 36 | 1 |
| 1125-4-100-EB | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EB | 5,000 | 36 | 1 |
| 1125-4-100-ED | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-ED | 5,000 | 36 | 1 |
| 1125-4-100-EF | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-EF | 5,000 | 36 | 1 |
| 1125-4-100-H | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | HP1125-4-100-H | 5,000 | 36 | 1 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
- Type
- Motor Rewind Hose Reel
- Series
- 1125 Series
- Hose Inside Diameter (in.)
- 1/2
- Hose Outside Diameter (in.)
- 7/8
- Hose Length (ft.)
- 100
- Hose Included
- No
- Maximum Working Pressure (PSI)
- 3000
- Width (in.)
- 17
- Height (in.)
- 18.75
- Length (in.)
- 17.63
- Mounting Pattern (in.)
- 9.44M
- Mounting Pattern (in.)
- 10N
- Base (in.)
- 11.38X
- Base (in.)
- 16Y
This product hasn't received any reviews yet. Be the first to review this product!