Cleco 50EAN205NA6 NeoTek Right Angle Corded Electric Nutrunner | 50 Series | 250 RPM | 30.2 - 151.2 (ft-lbs) Torque Range | 3/4" Square Drive

When production fastening requires traceable torque control in a compact right-angle format, the Cleco 50EAN205NA6 NeoTek Corded Electric Nutrunner delivers a 30.2 - 151.2 ft-lbs torque range for controlled tightening on larger bolted assemblies. It's 250 RPM free speed supports steady rundown without overspeeding critical joints, while the 3/4" square drive accepts compatible square-drive sockets for high-torque assembly work. The right-angle head helps reach around frames, brackets, housings, and other obstructions where pistol or inline tools may not fit.

As part of Cleco’s 50 Series NeoTek platform, this corded electric nutrunner uses transducer control (a built-in torque measurement system that helps monitor and control the tightening process) for repeatable fastening on safety-critical and quality-controlled joints. The brushless motor, configurable LED light rings, and on-board tool memory make it suitable for assembly stations where torque accuracy, production feedback, and preventive maintenance planning matter.

Type: Right Angle Corded Electric Nutrunner | Series: NeoTek 50 Series | Model: 50EAN205NA6 | Torque Range: 30.2 - 151.2 ft-lbs | Torque Range: 41 - 205 Nm | Free Speed: 250 RPM | Weight: 8.66 lbs / 3.93 kg | Length: 22.13" / 562 mm | Side to Center: 1.16" / 29.5 mm | Head Height: 2.44" / 62.0 mm | Drive Size: 3/4" | Drive Type: Square Drive

Features:

• Transducer control supports repeatable torque performance for precision assembly and documented fastening processes.
• Brushless motor helps reduce wear points compared with brushed motor designs and supports consistent production use.
• Right-angle configuration improves access to recessed fasteners, frame-mounted joints, and assemblies with limited tool clearance.
• Configurable LED light rings provide visual feedback that can be set up for operator guidance, fastening status, or process indication.
• Programmable multi-function buttons allow the tool to be adapted to station-specific fastening workflows.
• On-board intelligent memory records tool setup values and cycle counts for maintenance scheduling and process management.
• Corded electric NeoTek platform provides continuous power for production fastening without battery changeover.

Made in USA:

Applications:

• Automotive and heavy vehicle assembly — tightening larger structural, suspension, bracket, and subassembly fasteners where controlled torque is required.
• Aerospace and transportation manufacturing — fastening safety-critical joints that benefit from transducer-controlled torque measurement and production feedback.
• Industrial equipment assembly — running down bolts on machinery frames, gear housings, guards, and mounted components.
• Appliance and durable goods production — supporting repeatable fastening on assembly lines where multiple operators need consistent tool feedback.
• Fixture-based manufacturing cells — reaching around tooling, frames, or nested parts with the right-angle head while maintaining torque control.

FAQs:

• Q: What does transducer control mean on this Cleco nutrunner?
  A: Transducer control means the tool uses a built-in torque-sensing system to monitor fastening output. This helps production teams control torque more accurately than basic clutch-style tools and supports quality-focused assembly processes.
• Q: What size sockets does the 50EAN205NA6 use?
  A: This model has a 3/4" square drive, so it is used with compatible 3/4" square-drive sockets. Socket size should be selected based on the fastener, and the socket must be rated for the torque being applied.
• Q: Is this a battery-powered tool?
  A: No. The 50EAN205NA6 is a corded electric NeoTek nutrunner, which makes it a good fit for production stations that need continuous power and repeatable fastening without battery swaps.
• Q: Why choose a right-angle nutrunner instead of an inline model?
  A: A right-angle nutrunner places the drive at 90 degrees to the tool body, helping operators reach fasteners near walls, brackets, frames, housings, or other obstructions. Inline tools can be better for open access, but right-angle tools are often preferred when clearance is limited.
• Q: Does this tool require a Cleco controller and cable?
  A: NeoTek corded electric tools are used as part of a controlled fastening system. Source data identifies compatibility with Cleco NeoTek controllers and tool cables, but controller, cable, and accessory inclusion should be verified before publishing or ordering.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com