Cleco 50EAN80JA4 NeoTek Right Angle Corded Electric Nutrunner | 50 Series | 670 RPM | 11.8 - 59 (ft-lbs) Torque Range | 1/2" Square Drive

Built for controlled fastening where higher torque capacity is required, the Cleco 50EAN80JA4 NeoTek Right Angle Corded Electric Nutrunner delivers an 11.8 - 59 ft-lbs torque range for production joints that need more clamp load than smaller NeoTek 50 Series models. Its 670 RPM free speed supports steady rundown on larger fasteners, while the 1/2" square drive accepts compatible 1/2" drive sockets commonly used for higher-torque nut and bolt assembly.

As part of the Cleco NeoTek 50 Series, the 50EAN80JA4 is a right-angle corded electric nutrunner for precision assembly stations where repeatable torque, process feedback, and tool access all influence fastening quality. The right-angle head helps operators reach fasteners near brackets, fixtures, housings, panels, and recessed components. Transducer control, which electronically measures torque during the fastening cycle, helps support controlled fastening programs where the tool must do more than simply run a fastener down.

Type: Corded Electric Nutrunner | Series: NeoTek 50 Series | Model: 50EAN80JA4 | Configuration: Right Angle | Torque Range: 11.8 - 59 ft-lbs / 16 - 80 Nm | Free Speed: 670 RPM | Output Drive: 1/2" Square

Features:

• NeoTek 50 Series right-angle corded electric nutrunner for precision assembly fastening.
• Transducer control supports electronic torque measurement for quality-controlled fastening processes.
• 11.8 - 59 ft-lbs torque range serves higher-torque bolted joints in production assembly work.
• 670 RPM free speed provides controlled rundown for larger fasteners and higher clamp-load applications.
• 1/2" square output drive accepts compatible sockets for higher-torque nut and bolt fastening.
• Right-angle configuration improves access around fixtures, brackets, housings, panels, and side-facing fastener locations.
• NeoTek platform supports repeatable fastening workflows where torque control and process consistency are required.

Made in USA:

Applications:

• Heavy equipment manufacturing — tightening frame, bracket, housing, guard, and support fasteners within the tool’s rated torque range.
• Automotive and transportation assembly — controlled fastening on chassis-related subassemblies, mounts, panels, and production hardware.
• Agricultural and construction equipment production — assembling structural supports, covers, drivetrain-adjacent components, and machine frames.
• Industrial machinery assembly — repeatable rundown of higher-torque joints on equipment frames, enclosures, motor mounts, and mechanical modules.
• Production maintenance and tool crib support — standardizing controlled electric fastening where 1/2" square-drive tooling is preferred.

FAQs:

• Q: What type of fastening work is the Cleco 50EAN80JA4 used for?
  A: It is used for controlled production fastening where the target torque falls within 11.8 - 59 ft-lbs. This makes it suitable for higher-torque assembly joints that require repeatability rather than general-purpose bolt removal.
• Q: Why does this model use a 1/2" square drive instead of 3/8"?
  A: A 1/2" square drive is commonly used with larger sockets and higher-torque fastening applications. It helps match the tool’s 11.8 - 59 ft-lbs range to appropriate production socket tooling.
• Q: What does transducer control mean on a Cleco NeoTek nutrunner?
  A: Transducer control means the tool uses an electronic torque-sensing element to measure torque during the fastening cycle. This supports controlled assembly processes where torque feedback and fastening consistency are important.
• Q: Why is the 670 RPM speed lower than smaller NeoTek models?
  A: Higher-torque nutrunners often trade some free speed for greater torque capacity. The 670 RPM speed is selected for controlled rundown on larger fasteners where final torque accuracy matters more than maximum speed.
• Q: Does this nutrunner include the controller, cable, or sockets?
  A: The supplied product details identify the tool model and headline specifications, but they do not confirm included accessories. Confirm the required Cleco controller, tool cable, sockets, and programming setup before ordering for a production station.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com