Cleco 50EAN59HA3 NeoTek Right Angle Corded Electric Nutrunner | 50 Series | 915 RPM | 8.8 - 43.5 (ft-lbs) Torque Range | 3/8" Square Drive

Built for higher-torque controlled fastening on production lines, the Cleco 50EAN59HA3 NeoTek Right Angle Corded Electric Nutrunner delivers an 8.8 - 43.5 ft-lbs torque range for bolted joints that need more clamp load than smaller NeoTek right-angle models. Its 915 RPM free speed supports controlled rundown on medium-to-higher torque fasteners, while the 3/8" square drive accepts compatible square-drive sockets for nut and bolt assembly in manufacturing workstations.

As a Cleco NeoTek 50 Series right-angle corded electric nutrunner, the 50EAN59HA3 is suited to precision assembly systems where repeatable torque, fastening feedback, and tool access all affect production quality. The right-angle head helps operators reach fasteners close to fixtures, panels, brackets, housings, and recessed components. Transducer control, which electronically measures torque during the fastening cycle, supports assembly programs that require better process verification than basic clutch-only fastening tools.

Type: Corded Electric Nutrunner | Series: NeoTek 50 Series | Model: 50EAN59HA3 | Configuration: Right Angle | Torque Range: 8.8 - 43.5 ft-lbs / 12 - 59 Nm | Free Speed: 915 RPM | Output Drive: 3/8" Square

Features:

• NeoTek 50 Series right-angle corded electric nutrunner for precision assembly fastening.
• Transducer control supports electronic torque measurement for quality-controlled fastening processes.
• 8.8 - 43.5 ft-lbs torque range serves higher-torque bolted joints within the 50 Series right-angle lineup.
• 915 RPM free speed provides controlled rundown for applications requiring more torque capacity.
• 3/8" square output drive accepts compatible sockets for nut and bolt fastening.
• Right-angle configuration improves access around fixtures, brackets, panels, and side-facing fastener locations.
• NeoTek platform supports repeatable assembly workflows where torque control and fastening consistency matter.

Made in USA:

Applications:

• Automotive and transportation assembly — tightening brackets, mounts, suspension-related subassemblies, and structural fasteners within the rated torque range.
• Heavy equipment manufacturing — fastening guards, frames, housings, supports, and mechanical components that require controlled electric torque.
• Agricultural and turf equipment production — assembling chassis components, brackets, covers, and drivetrain-adjacent hardware in repeatable workcells.
• Appliance and industrial equipment assembly — controlled rundown of higher-torque fasteners on frames, panels, mounts, and internal assemblies.
• Production maintenance and tool crib support — standardizing fastening tools for manufacturing stations that require documented torque control.

FAQs:

• Q: What type of work is the Cleco 50EAN59HA3 best matched to?
  A: It is matched to production assembly fastening where the target torque falls within 8.8 - 43.5 ft-lbs. This makes it better suited to higher-torque joints than lower-range NeoTek right-angle models.
• Q: Why is this model slower than lower-torque 50 Series nutrunners?
  A: Higher-torque nutrunners often trade some free speed for greater torque capacity. The 915 RPM speed still supports efficient rundown, but it is selected for applications where controlled torque output is the priority.
• Q: What does transducer control do in a production fastening process?
  A: Transducer control uses an electronic torque-sensing element to measure fastening torque during the cycle. This helps manufacturers monitor fastening results and maintain consistency across repeated assemblies.
• Q: Can I use standard 3/8" sockets with this nutrunner?
  A: The tool uses a 3/8" square drive, so it accepts compatible 3/8" square-drive sockets. Socket selection should match the fastener, torque requirement, clearance, and production environment.
• Q: Does this product include the controller, cable, or sockets?
  A: The supplied product details do not confirm included accessories. Verify the required Cleco controller, cable, sockets, and programming requirements before ordering for a production station.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com