Cleco 50EAN39GA3 NeoTek Right Angle Corded Electric Nutrunner | 50 Series | 1375 RPM | 5.9 - 28.7 (ft-lbs) Torque Range | 3/8" Square Drive

Built for controlled fastening in production assembly environments, the Cleco 50EAN39GA3 NeoTek Right Angle Corded Electric Nutrunner provides a 5.9 - 28.7 ft-lbs torque range for medium-torque joints that require repeatable tightening and process feedback. Its 1375 RPM free speed gives operators a strong balance of rundown speed and fastening control, while the 3/8" square drive accepts compatible square-drive sockets commonly used for nut and bolt assembly in manufacturing workstations.

Part of the Cleco NeoTek 50 Series, the 50EAN39GA3 is a right-angle corded electric nutrunner for precision assembly systems. The right-angle head supports fastening access around brackets, housings, fixtures, and recessed components where inline tools can be difficult to position. Transducer control, which electronically measures torque during the fastening cycle, helps support production fastening programs where repeatability, traceability, and quality verification are important.

Type: Corded Electric Nutrunner | Series: NeoTek 50 Series | Model: 50EAN39GA3 | Configuration: Right Angle | Torque Range: 5.9 - 28.7 ft-lbs / 8 - 39 Nm | Free Speed: 1375 RPM | Output Drive: 3/8" Square

Features:

• NeoTek 50 Series right-angle corded electric nutrunner for precision assembly fastening.
• Transducer control supports electronic torque measurement for quality-controlled fastening operations.
• 5.9 - 28.7 ft-lbs torque range suits medium-torque bolted joints in production environments.
• 1375 RPM free speed supports efficient rundown while maintaining controlled fastening behavior.
• 3/8" square output drive accepts compatible sockets for nut and bolt applications.
• Right-angle configuration improves access to side-facing fasteners, fixture-mounted parts, and recessed assemblies.
• NeoTek platform supports precision fastening workflows where repeatability and process consistency matter.

Made in USA:

Applications:

• Automotive assembly — tightening brackets, mounts, housings, and production subassemblies within the tool’s rated torque range.
• Heavy equipment manufacturing — controlled fastening on panels, guards, frames, and mechanical components.
• Appliance and equipment production — repeatable rundown of medium-torque fasteners on frames, panels, and internal assemblies.
• Aerospace and precision manufacturing — fastening access-limited joints where a right-angle head helps maintain tool alignment.
• Industrial MRO and production support — standardizing electric fastening at repair stations, tool cribs, and manufacturing cells.

FAQs:

• Q: What is the Cleco 50EAN39GA3 used for?
  A: The 50EAN39GA3 is used for controlled assembly fastening where the target torque falls within 5.9 - 28.7 ft-lbs. It is intended for production and quality-controlled fastening work, not general bolt removal.
• Q: What does transducer control mean on this nutrunner?
  A: Transducer control means the tool uses an electronic torque-sensing element to measure torque during the fastening cycle. This helps production teams monitor fastening results more closely than basic clutch-only tools.
• Q: Why choose the 50EAN39GA3 instead of a faster lower-torque model?
  A: This model provides a higher torque range than lower-torque NeoTek right-angle tools while still offering 1375 RPM rundown speed. It is a good fit when the joint requires more torque but still needs efficient cycle time.
• Q: What sockets work with the 3/8" square drive?
  A: The tool accepts compatible 3/8" square-drive sockets. Socket selection should match the fastener size, torque level, and production requirements for the application.
• Q: Does this nutrunner include the controller, cable, or programming setup?
  A: The supplied product details identify the tool model and headline specifications, but they do not confirm included accessories. Confirm the required Cleco controller, cable, sockets, and setup requirements before ordering.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com