Cleco 30EAN28FA3 NeoTek Corded Electric Nutrunner | 615 RPM | 4.2 - 20.6 (ft-lbs) Torque Range | 3/8" Square Drive

When a production assembly station needs controlled fastening with electric precision, the Cleco 30EAN28FA3 NeoTek Corded Electric Nutrunner delivers a 4.2 - 20.6 ft-lbs torque range for repeatable tightening on medium-duty bolted joints. Its 615 RPM free speed supports controlled rundown without overspeeding fasteners, while the 3/8" square drive fits common square-drive sockets used in manufacturing, machinery assembly, and maintenance cells. The right-angle head helps operators reach side-facing fasteners and confined assemblies where inline tools may not align cleanly.

Part of Cleco’s NeoTek precision assembly platform, the 30EAN28FA3 uses transducer control, which measures torque electronically for tighter fastening feedback than basic clutch-only tools. With a compact 16.06" length, 0.65" side-to-center distance, and 1.58" angle head height, this nutrunner is built for controlled fastening in workstations where tool access, repeatability, and process consistency matter.

Type: Corded Electric Nutrunner | Series: NeoTek 30 Series | Model: 30EAN28FA3 | Grip Style: Right Angle | Torque Range: 4.2 - 20.6 ft-lbs / 5.7 - 28 Nm | Free Speed: 615 RPM | Drive Size: 3/8" | Drive Type: Square Drive | Weight: 2.91 lbs | Length: 16.06" | Side to Center: 0.65" | Angle Head Height: 1.58"

Features:

• NeoTek corded electric right-angle nutrunner for precision assembly fastening.
• Transducer control provides electronic torque feedback for quality-critical fastening processes.
• Engineered to provide 1 million cycles maintenance-free.
• Repeatability and accuracy of 2.0 Cm/Cmk at +/- 7% for controlled production fastening.
• 615 RPM free speed supports steady rundown on medium-torque bolted joints.
• 3/8" square output drive works with compatible square-drive sockets.
• Configurable LED light ring gives visual process feedback at the tool.
• Right-angle head improves access to side-facing fasteners, recessed assemblies, and tight station layouts.

Made in USA:

Applications:

• Automotive and transportation assembly — tightening bracket, housing, frame, and subassembly fasteners where torque traceability is important.
• Appliance and equipment manufacturing — controlled rundown of medium-size bolted joints on repeatable production stations.
• Aerospace and precision assembly — fastening access-limited joints where a right-angle head helps maintain proper tool alignment.
• Heavy machinery assembly — installing fasteners on panels, guards, mounts, and mechanical components within the specified torque range.
• Industrial MRO and tool cribs — supporting standardized electric fastening programs where consistent torque output is required.

FAQs:

• Q: What type of fastening work is the Cleco 30EAN28FA3 used for?
  A: It is used for controlled production fastening where repeatable torque is more important than maximum speed or breakaway power. The 4.2 - 20.6 ft-lbs range fits medium-duty assembly joints within the tool’s rated capacity.
• Q: What does transducer control mean on a nutrunner?
  A: Transducer control means the tool uses an electronic sensing element to measure applied torque during the fastening cycle. This helps support quality-controlled assembly processes where torque feedback and repeatability are required.
• Q: Is the 3/8" square drive compatible with standard sockets?
  A: Yes, the tool uses a 3/8" square output drive for compatible 3/8" drive sockets. Always confirm the socket is appropriate for the fastener size, torque level, and production environment.
• Q: Why choose a right-angle nutrunner instead of an inline tool?
  A: A right-angle nutrunner helps reach fasteners located along side faces, inside fixtures, or near surrounding components. The 0.65" side-to-center distance and 1.58" head height make this model useful where straight tool access is limited.
• Q: Is this tool intended for automotive repair or DIY use?
  A: No. This is a Cleco NeoTek precision assembly tool for production and quality-controlled fastening systems, not a general repair impact wrench. Buyers should match it to the correct Cleco electric fastening setup and torque program before ordering.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com