Cleco 50EAN110KA4 NeoTek Right Angle Corded Electric Nutrunner | 50 Series | 475 RPM | 16.2 - 80.3 (ft-lbs) Torque Range | 1/2" Square Drive

Built for higher-torque production fastening, the Cleco 50EAN110KA4 NeoTek Right Angle Corded Electric Nutrunner delivers a 16.2 - 80.3 ft-lbs torque range for assembly joints that require controlled clamp load and repeatable fastening results. It's 475 RPM free speed provides a steady rundown on larger fasteners, while the 1/2" square drive accepts compatible 1/2" drive sockets commonly used for higher-torque nut and bolt assembly in manufacturing environments.

As part of the Cleco NeoTek 50 Series, the 50EAN110KA4 is a right-angle corded electric nutrunner built for precision fastening systems where access, torque feedback, and process control all matter. The right-angle configuration helps operators reach fasteners positioned near fixtures, housings, brackets, frames, and recessed components. Transducer control, which electronically measures torque during the fastening cycle, supports quality-controlled assembly work where repeatability is more important than simple fastener removal.

Type: Corded Electric Nutrunner | Series: NeoTek 50 Series | Model: 50EAN110KA4 | Configuration: Right Angle | Torque Range: 16.2 - 80.3 ft-lbs / 22 - 109 Nm | Free Speed: 475 RPM | Output Drive: 1/2" Square

Features:

• NeoTek 50 Series right-angle corded electric nutrunner for precision assembly fastening.
• Transducer control supports electronic torque measurement for quality-controlled fastening processes.
• 16.2 - 80.3 ft-lbs torque range supports higher-torque bolted joints in production assembly work.
• 475 RPM free speed provides controlled rundown for larger fasteners and higher clamp-load applications.
• 1/2" square output drive accepts compatible sockets for higher-torque nut and bolt fastening.
• Right-angle configuration improves access around frames, fixtures, brackets, housings, panels, and side-facing fastener locations.
• NeoTek platform supports repeatable fastening workflows where torque control and process consistency are required.

Made in USA:

Applications:

• Heavy equipment manufacturing — tightening brackets, supports, guards, housings, frame hardware, and machine components within the rated torque range.
• Automotive and transportation assembly — controlled fastening on chassis-related assemblies, mounts, structural brackets, and production hardware.
• Agricultural and construction equipment production — assembling machine frames, covers, drivetrain-adjacent components, and structural supports.
• Industrial machinery assembly — repeatable rundown of higher-torque joints on equipment frames, enclosures, motor mounts, and mechanical modules.
• Production maintenance and tool crib support — standardizing electric fastening where 1/2" square-drive tooling and documented torque control are preferred.

FAQs:

• Q: What type of fastening work is the Cleco 50EAN110KA4 used for?
  A: It is used for controlled production fastening where the target torque falls within 16.2 - 80.3 ft-lbs. This model is suited to higher-torque assembly joints that require repeatable tightening rather than general-purpose bolt removal.
• Q: Why does this nutrunner use a 1/2" square drive?
  A: A 1/2" square drive is commonly used with larger sockets and higher-torque fastening applications. It helps match the tool’s torque range to appropriate production socket tooling.
• Q: What does transducer control mean on a Cleco NeoTek tool?
  A: Transducer control means the tool uses an electronic torque-sensing element to measure fastening torque during the cycle. This supports manufacturing processes that rely on torque feedback, repeatable output, and quality verification.
• Q: Why is the 475 RPM speed lower than smaller NeoTek 50 Series models?
  A: Higher-torque nutrunners typically trade some free speed for greater torque capacity. The 475 RPM speed is intended for controlled rundown on larger fasteners where final torque accuracy and clamp load are the priority.
• Q: Does this nutrunner include the controller, cable, or sockets?
  A: The supplied product details identify the tool model and headline specifications, but they do not confirm included accessories. Confirm the required Cleco controller, tool cable, sockets, and programming setup before ordering for a production station.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com