Cleco 30EAN06EA3 NeoTek Corded Electric Nutrunner | 2925 RPM | 0.9 - 4.4 (ft-lbs) Torque Range | 3/8" Square Drive

Built for low-clearance production fastening, the Cleco 30EAN06EA3 NeoTek Corded Electric Nutrunner combines a right-angle head with 0.9 - 4.4 ft-lbs of torque for controlled assembly work on smaller threaded fasteners. It's 2925 RPM free speed supports quick rundown before final tightening, while the 3/8" square drive accepts compatible industrial sockets for nut-and-bolt assembly. As part of the NeoTek 30 Series, this tool uses transducer control, meaning torque is measured electronically during the fastening cycle to support repeatable, traceable results on quality-critical joints.

The compact right-angle configuration helps operators reach fasteners near brackets, housings, panels, and other obstructions where a straight tool may not fit. With a 1.3 - 6 Nm torque range, 1.13 kg tool weight, 380 mm length, and 12 mm side-to-center distance, the 30EAN06EA3 is suited for precision assembly lines that need speed, access, and fastening control in one corded electric platform.

Type: Corded Electric Right Angle Nutrunner | Series: NeoTek 30 Series | Model: 30EAN06EA3 | Control Type: Transducer Control | Torque Range: 0.9 - 4.4 ft-lbs / 1.3 - 6 Nm | Free Speed: 2925 RPM | Output Drive: 3/8" Square Drive | Weight: 1.13 kg | Length: 380 mm | Side-to-Center Distance: 12 mm | Angle Head Height: 36 mm

Features:

• Transducer control supports electronically monitored torque output for repeatable fastening on quality-critical assembly joints.
• Right-angle head reaches low-clearance fastening points around housings, brackets, panels, and fixture-mounted components.
• 2925 RPM free speed helps reduce rundown time on repeated production fastening cycles.
• 0.9 - 4.4 ft-lbs torque range is suited for smaller fasteners where controlled tightening is more important than high breakaway force.
• 3/8" square output drive works with compatible industrial sockets for nut-and-bolt assembly tasks.
• Configurable LED light ring gives operators a clear visual status indicator during fastening operations.
• Programmable multi-function buttons allow the tool interface to be configured around the assembly process.
• Brushless motor technology supports production fastening without brush replacement maintenance.

Made in USA:

Applications:

• Automotive assembly — tightening small fasteners around brackets, interior components, housings, and light subassemblies.
• Aerospace and aviation assembly — controlled fastening in areas where access, traceability, and repeatability are important.
• Industrial assembly lines — repeated nut-and-bolt rundown where a corded electric tool is preferred over pneumatic tooling.
• Agricultural and lawn equipment production — assembling panels, guards, frames, and lighter mechanical components.
• Heavy truck and trailer manufacturing — fastening smaller hardware in confined areas around body, cab, and accessory assemblies.

FAQs:

• Q: What does transducer control mean on this Cleco NeoTek nutrunner?
  A: Transducer control means the tool uses an electronic sensing system to measure torque during fastening. This helps production teams monitor rundown quality and maintain repeatable tightening results.
• Q: Is the 30EAN06EA3 a high-torque nutrunner?
  A: No. This model is a low-torque precision assembly tool with a 0.9 - 4.4 ft-lbs range. It is intended for controlled fastening of smaller hardware, not for loosening stuck fasteners or high-torque structural bolting.
• Q: Why choose a right-angle nutrunner instead of a straight model?
  A: A right-angle nutrunner places the drive at 90 degrees to the tool body, helping the operator reach fasteners in tight spaces or near obstructions. This is useful when the fastener location does not allow straight-line tool access.
• Q: Does this tool use standard sockets?
  A: The 30EAN06EA3 has a 3/8" square output drive, so it accepts compatible 3/8" drive sockets. Socket selection should match the fastener size, clearance, and torque requirement of the assembly.
• Q: Is this tool appropriate for general garage or DIY use?
  A: This is a precision production assembly tool, not a general-purpose automotive impact wrench. For garage repair, tire service, or rusted fastener removal, an impact wrench is usually the better tool category.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com