Built for mobile service equipment and fixed installations with an available 12V electrical system, the Coxreels 1125-5-175-E Electric Motor Rewind Hose Reel provides powered retrieval for up to 175 feet of 3/4-inch I.D. hose. Its 12V DC, 1/3 HP motor reduces the effort required to rewind a long, large-diameter hose after use, making this 1125 Series reel useful on fleet vehicles, lubrication equipment, utility trucks, and industrial fluid-delivery systems. The 3,000 PSI maximum working pressure supports compatible air, water, oil, lubrication, and hydraulic applications when the separately installed hose, fittings, and accessories carry suitable ratings.
A direct gear drive transfers motor power to the drum without a chain, providing smooth and quiet hose retrieval. The low-profile outlet riser and open drum slot help the 3/4-inch hose form a flat wrap while reducing sharp bends near the connection point. Permanently lubricated self-aligning pillow block bearings promote steady drum rotation, while an adjustable tension brake helps control free-wheeling during payout. The one-piece welded steel A-frame provides a rigid mounting platform for vehicle-mounted, skid-mounted, and stationary installations.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric DC Motor Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Motor: 12V DC, 1/3 HP | Drive: Direct Gear Drive | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 175 ft | Max Pressure: 3,000 PSI | Swivel Inlet: 3/4" Female NPT | Outlet Riser: 3/4" Female NPT | Overall Dimensions: 32" W x 18.75" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base Dimensions: 23.38" X x 16" Y
Features:
- 12V DC, 1/3 HP electric motor provides powered hose retrieval from a compatible vehicle or equipment electrical system.
- Direct gear drive delivers smooth, quiet retraction without a chain-drive mechanism.
- One-piece, all-welded steel A-frame construction creates a rigid mounting platform for mobile and stationary installations.
- Machined solid brass 90° full-flow NPT swivel with nitrile seals supports efficient fluid transfer and serviceable seal replacement.
- Low-profile outlet riser and open drum slot promote a flat, non-crimping hose wrap during payout and rewind.
- Permanently lubricated self-aligning bearings and an adjustable tension brake support smooth, controlled drum movement.
Made in USA: 
Applications:
- Fleet and utility service vehicles using onboard 12V DC power for hose retrieval.
- Mobile lubrication and hydraulic service equipment handling compatible fluids.
- Construction and agricultural maintenance vehicles requiring extended hose reach.
- Industrial maintenance areas supplying air, water, oil, or compatible fluids to machinery.
- Equipment trailers and machinery skids requiring 175 feet of 3/4-inch hose capacity.
FAQs:
- Q: Does the Coxreels 1125-5-175-E include hose?
A: No. This model is supplied as a reel only. Install a compatible 3/4-inch I.D. hose with an outside diameter no greater than 1-1/4 inches and suitable pressure, temperature, bend-radius, and media ratings. - Q: What does the 'E' suffix indicate?
A: The E suffix identifies the 12V DC, 1/3 HP electric motor rewind configuration. The motor powers the reel's direct gear drive for hose retrieval. - Q: How does this model differ from the 1125-5-100-E?
A: The 1125-5-175-E stores up to 175 feet of 3/4-inch hose, compared with 100 feet for the 1125-5-100-E. Its additional capacity increases the overall width to 32 inches and the listed weight to 63 pounds. - Q: Can this reel operate at the full 3,000 PSI rating?
A: Yes, provided the installed hose, fittings, connectors, and every other fluid-path component are rated for the intended working pressure. The completed system is limited by its lowest-rated component.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-175 | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175 | 4,500 | 50 | 8 |
| 1125-5-175-A | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-A | 4,500 | 50 | 8 |
| 1125-5-175-AB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-AB | 4,500 | 50 | 8 |
| 1125-5-175-C | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-C | 4,500 | 50 | 8 |
| 1125-5-175-E | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-E | 4,500 | 50 | 8 |
| 1125-5-175-EA | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EA | 4,500 | 50 | 8 |
| 1125-5-175-EB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EB | 4,500 | 50 | 8 |
| 1125-5-175-ED | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-ED | 4,500 | 50 | 8 |
| 1125-5-175-EF | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EF | 4,500 | 50 | 8 |
| 1125-5-175-H | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-H | 4,500 | 50 | 8 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
- Type
- Motor Rewind Hose Reel
- Series
- 1125 Series
- Hose Inside Diameter (in.)
- 3/4
- Hose Outside Diameter (in.)
- 1-1/4
- Hose Length (ft.)
- 175
- Hose Included
- No
- Maximum Working Pressure (PSI)
- 3000
- Width (in.)
- 32
- Height (in.)
- 18.75
- Length (in.)
- 17.63
- Mounting Pattern (in.)
- 21.44M
- Mounting Pattern (in.)
- 10N
- Base (in.)
- 23.38X
- Base (in.)
- 16Y
This product hasn't received any reviews yet. Be the first to review this product!