When a long 3/4" hose needs powered rewind without relying on an electric motor, the Coxreels 1125-5-175-AB provides a compressed-air rewind solution for service trucks, plant maintenance areas, washdown stations, spraying operations, and other work zones with available shop air. This 1125 Series reel is built for 3/4" hose I.D. with 175 ft hose capacity and a 3000 PSI maximum pressure rating, giving buyers a reel-only platform for longer hose runs where organized storage, controlled payout, and powered retrieval matter.
The #6 Gast motor rewind uses a 6-vane cast iron air motor to rotate the reel drum for hose retrieval, which can be useful in compressed-air-equipped shops and mobile service environments. Coxreels' 1125 Series construction includes an all-welded steel 'A' frame, low-profile outlet riser, open drum slot, direct gear drive, and self-aligning pillow block bearings to support smooth hose wrap, reduce crimping, and keep the reel stable during repeated payout and rewind cycles.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Motor Option: AB, Air - 6 Vane Cast Iron Air Motor | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 175 ft | Hose Included: No | Inlet Swivel & Outlet Riser: 3/4" F NPT | Max Pressure: 3000 PSI | Ship Weight: 58 lbs | Overall Dimensions: 29.38" W x 18.75" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base: 23.38" X x 16" Y
Features:
- Compressed air motor rewind retrieves hose using available air power instead of manual cranking.
- AB motor option uses an air - 6 vane cast iron air motor for powered rewind on compatible compressed air systems.
- Reliable direct gear drive on motor driven models provides smooth, quiet retraction with no chain.
- All welded steel 'A' frame construction supports the reel body during repeated payout, rewind, transport, and storage.
- Exclusive low profile outlet riser and open drum slot design promote a flat, smooth hose wrap and help reduce hose crimping.
- Machined solid brass 90° full-flow NPT swivel supports fluid transfer and simplifies seal maintenance.
- Permanently lubricated self-aligning pillow block bearings support smooth drum rotation.
- Adjustable tension brake helps prevent free-wheeling during operation for better hose control.
Made in USA: 
Applications:
- Industrial plant and ground maintenance where long hose runs need organized storage and air-powered retrieval.
- Air compressor and shop service areas that already have compressed air available for operating the rewind motor.
- Washdown, high-flow watering, and spraying operations using hose and fittings compatible with the reel's 3000 PSI rating.
- Construction sites, landscape crews, and farming operations that need hose management on trucks, trailers, or fixed service points.
- Pest and weed control, golf course maintenance, and agricultural spraying setups where longer hose reach helps cover larger work areas.
- Chemical fluid transfer applications when the selected hose, seals, fittings, and fluid path materials are confirmed compatible with the fluid being handled.
FAQs:
- Q: What does 'less hose' mean on the Coxreels 1125-5-175-AB?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose separately and verify the hose pressure rating, outside diameter, fittings, and material compatibility before installation. - Q: What does the AB suffix mean?
A: The AB suffix identifies the air - 6 vane cast iron air motor rewind option. This allows the reel to retrieve hose using compressed air rather than hand crank, electric, or hydraulic rewind. - Q: Does the air motor make this reel explosion-proof?
A: Do not assume explosion-proof approval from the air motor alone. If the installation is in a hazardous or classified location, confirm all applicable safety, grounding, fluid, and site requirements before ordering or installing the reel. - Q: What hose size should be used with this reel?
A: This model is listed for 3/4" hose I.D. with 1-1/4" hose O.D. and 175 ft standard capacity. Do not exceed the reels listed hose capacity or 3000 PSI maximum pressure rating. - Q: Can this reel be mounted on a service truck?
A: Yes, when the mounting surface can support the reel, hose, fittings, and operating forces. Check the 21.44" M x 10" N mounting pattern and 23.38" X x 16" Y base dimensions before drilling or fabricating the mount.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-175 | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175 | 4,500 | 50 | 8 |
| 1125-5-175-A | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-A | 4,500 | 50 | 8 |
| 1125-5-175-AB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-AB | 4,500 | 50 | 8 |
| 1125-5-175-C | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-C | 4,500 | 50 | 8 |
| 1125-5-175-E | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-E | 4,500 | 50 | 8 |
| 1125-5-175-EA | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EA | 4,500 | 50 | 8 |
| 1125-5-175-EB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EB | 4,500 | 50 | 8 |
| 1125-5-175-ED | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-ED | 4,500 | 50 | 8 |
| 1125-5-175-EF | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EF | 4,500 | 50 | 8 |
| 1125-5-175-H | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-H | 4,500 | 50 | 8 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
