When a high-pressure compressed air reel needs powered rewind without relying on an electric motor, the Coxreels HP1125-5-175-AB provides a #6 Gast air motor rewind configuration in the HP1125 Series. This model is built for 3/4" hose I.D. with 175 ft hose capacity, giving service departments, plant maintenance teams, and high-pressure air stations the reach needed to cover larger work areas from a fixed reel location. The 4500 PSI maximum pressure rating supports demanding compressed air applications when used with properly rated hose, fittings, and system components.
The 'AB' suffix identifies the #6 Gast air motor rewind option, allowing compressed air to power hose retrieval instead of manual hand cranking. Coxreels' HP1125 Series design combines an all welded steel 'A' frame, low profile outlet riser, open drum slot, and direct gear drive to help the hose wrap smoothly across the drum. For buyers comparing motor rewind options, this configuration is a practical choice where compressed air is already available and electrical wiring is not preferred at the reel location.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Motorized Hose Reel | Brand: Coxreels | Series: HP1125 Series | Model: HP1125-5-175-AB | Rewind Type: Compressed Air Motor Rewind | Motor: #6 Gast Air Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 175 ft | Max Pressure: 4500 PSI | Inlet Swivel / Outlet Riser: 3/4" F NPT | Swivel: Electroless Nickel Plated Steel 90° Full-Flow NPT Swivel Inlet | Swivel Seals: AFLAS | Hose Included: No | Ship Weight: 58 lbs | Overall Dimensions: 29.38" W x 18.75" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base: 23.38" X x 16" Y
Features:
- #6 Gast air motor rewind uses compressed air to retrieve the hose, helping reduce manual effort on long hose runs.
- All welded steel 'A' frame construction provides a rigid mounting structure for floor, wall, bench, or vehicle installations where properly supported.
- Exclusive low profile outlet riser and open drum slot design help create a flat, smooth hose wrap and reduce crimping during rewind.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure flow through the reel.
- AFLAS swivel seals are used on the HP Series high-pressure configuration for the swivel sealing system.
- Permanently lubricated self-aligning pillow block bearings support smooth reel rotation with reduced routine bearing maintenance.
- Adjustable tension brake helps prevent free-wheeling during operation, giving users better control over drum movement.
- Reliable direct gear drive on motor driven models provides quiet and smooth retraction with no chain drive.
Made in USA: 
Applications:
- High-pressure compressed air stations: Managing 3/4" air hose in fixed shop or plant locations where powered rewind keeps hose organized after use.
- Fleet and equipment maintenance: Supplying air across larger service bays for trucks, trailers, machinery, and maintenance equipment while reducing loose hose on the floor.
- Industrial MRO departments: Supporting maintenance and repair tasks where long hose reach and controlled rewind help keep work areas cleaner and easier to navigate.
- Manufacturing work cells: Routing compatible compressed air hose to tooling or service points from a mounted reel location without relying on manual rewind.
- Service vehicles and mounted systems: Storing high-pressure hose on skids, trucks, or equipment frames where a compressed air motor rewind option fits the available utility setup.
FAQs:
- Q: What does 'less hose' mean for the HP1125-5-175-AB?
A: It means this SKU is supplied as the reel only, without hose installed. The buyer must select and install compatible 3/4" I.D. hose separately. - Q: What does the 'AB' suffix indicate?
A: The 'AB' suffix identifies the #6 Gast air motor rewind option. This lets the reel use compressed air to power hose retrieval instead of an electric motor or hand crank. - Q: Can this reel be used for compressed air service?
A: Yes, when the reel, installed hose, fittings, and supply system are all rated for the working pressure and flow required by the application. The installed hose must not exceed the reel's rated capacity or pressure limits. - Q: Does this model include hose ends or the outlet hose?
A: No. Because this is a less-hose reel, the hose and hose-end fittings must be provided separately based on the pressure rating, hose length, and connection requirements of the system. - Q: What should be checked before mounting this reel?
A: Verify the available mounting space, mounting surface strength, and bolt pattern before installation. This model lists 29.38" W x 18.75" H x 17.63" L overall dimensions with a 21.44" M x 10" N mounting pattern.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-175 | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175 | 4,500 | 50 | 8 |
| 1125-5-175-A | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-A | 4,500 | 50 | 8 |
| 1125-5-175-AB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-AB | 4,500 | 50 | 8 |
| 1125-5-175-C | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-C | 4,500 | 50 | 8 |
| 1125-5-175-E | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-E | 4,500 | 50 | 8 |
| 1125-5-175-EA | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EA | 4,500 | 50 | 8 |
| 1125-5-175-EB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EB | 4,500 | 50 | 8 |
| 1125-5-175-ED | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-ED | 4,500 | 50 | 8 |
| 1125-5-175-EF | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EF | 4,500 | 50 | 8 |
| 1125-5-175-H | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-H | 4,500 | 50 | 8 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
