When a high-pressure hose setup needs powered rewind from a 12V DC electrical system, the Coxreels HP1125-5-175-ED provides a motorized reel platform for service trucks, pressure washing rigs, jetting equipment, and industrial fluid handling stations. This HP1125 Series reel is built for 3/4" I.D. hose with up to 175 ft hose capacity, giving operators extended working reach while keeping hose stored neatly when the job is complete. The 4500 PSI maximum pressure rating supports high-pressure applications when the installed hose, fittings, and system components are selected to match the same working-pressure requirements.
The 12V DC explosion proof 1/2 HP electric motor rewind is well suited for mobile equipment and vehicle-mounted systems where 12V DC power is available. Motor rewind helps reduce the effort of retrieving long, heavy high-pressure hose, especially in daily-use washdown, cleaning, lubrication, and hydraulic service environments. Coxreels' all-welded steel 'A' frame, low-profile outlet riser, and open drum slot help guide hose into a flat, non-crimping wrap, while the adjustable tension brake helps control drum rotation during payout and rewind.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Motor Rewind Hose Reel | Series: HP1125 Series | SKU: HP1125-5-175-ED | Configuration: Less Hose | Motor: 12V DC, 1/2 HP, Explosion Proof, Reversible | Hose I.D.: 3/4" | Hose Capacity: 175 ft | Max Pressure: 4500 PSI | Inlet / Outlet: 3/4" F NPT | Approx. Reel Weight: 50 lbs | Overall Dimensions: 32-3/4" W x 18-3/4" H x 17-5/8" L
Features:
- Motor rewind operation helps retrieve long high-pressure hose with less manual effort than hand crank reel operation.
- 12V DC, 1/2 HP explosion proof reversible motor option supports mobile and vehicle-mounted installations where compatible 12V DC power is available.
- All welded steel 'A' frame construction provides a rigid mounting structure for trucks, skids, shop floors, and fixed service stations.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure flow through the reel connection point.
- AFLAS swivel seals are used on high-pressure HP prefix models for demanding high-pressure hose reel service.
- Low-profile outlet riser and open drum slot design help promote a flat, smooth hose wrap and reduce hose crimping during rewind.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced bearing maintenance.
- Adjustable tension brake helps reduce free-wheeling when hose is being pulled out or powered back onto the reel.
Made in USA: 
Applications:
- Pressure washing and washdown rigs where high-pressure hose needs organized storage after cleaning cycles.
- Mobile service trucks using 12V DC power for powered hose rewind in field maintenance work.
- Jetting and drain-cleaning equipment that requires controlled storage for long 3/4" hose runs.
- Industrial plant maintenance stations where powered rewind helps reduce manual hose handling.
- Agricultural spraying, washdown, and equipment service when hose and fittings are selected for the fluid and pressure requirements.
- Oil, lubrication, grease, and hydraulic service setups that require a high-pressure reel supplied less hose for custom installation.
FAQs:
- Q: What does 'less hose' mean on the HP1125-5-175-ED?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose separately and confirm that the hose, fittings, and pressure rating match the application. - Q: Is this model different from the HP1125-5-175-EB?
A: Yes. The HP1125-5-175-ED uses a 12V DC explosion proof 1/2 HP motor rewind option, while the EB version uses a 24V DC explosion proof 1/2 HP motor rewind option. - Q: Can this reel be used on a service truck?
A: Yes, this 12V DC motor rewind configuration is commonly suited to mobile equipment and service-truck style installations when mounted properly to a rigid structure. Confirm wiring, circuit protection, and mounting hardware requirements before installation. - Q: Does the 4500 PSI rating apply to the complete hose assembly?
A: The reel is rated for 4500 PSI maximum pressure, but the installed hose, fittings, and system components must also be rated for the working pressure. The complete assembly is limited by the lowest-rated component in the system. - Q: Can I install a shorter or longer hose than 175 ft?
A: This reel is specified for up to 175 ft of 3/4" I.D. hose. Hose outside diameter, flexibility, weight, and length affect reel capacity, so replacement or custom hose selection should remain within Coxreels' published specifications.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-175 | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175 | 4,500 | 50 | 8 |
| 1125-5-175-A | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-A | 4,500 | 50 | 8 |
| 1125-5-175-AB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-AB | 4,500 | 50 | 8 |
| 1125-5-175-C | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-C | 4,500 | 50 | 8 |
| 1125-5-175-E | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-E | 4,500 | 50 | 8 |
| 1125-5-175-EA | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EA | 4,500 | 50 | 8 |
| 1125-5-175-EB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EB | 4,500 | 50 | 8 |
| 1125-5-175-ED | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-ED | 4,500 | 50 | 8 |
| 1125-5-175-EF | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EF | 4,500 | 50 | 8 |
| 1125-5-175-H | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-H | 4,500 | 50 | 8 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
