Built for industrial and mobile installations that need powered retrieval of a longer, large-diameter hose, the Coxreels 1125-5-175-A Motor Rewind Hose Reel stores up to 175 feet of 3/4-inch I.D. hose. Its compressed air motor reduces the effort required to retrieve a fully deployed hose, making this 1125 Series reel useful on service vehicles, lubrication equipment, machinery skids, and plant maintenance stations with an available pneumatic supply. The 3,000 PSI maximum working pressure supports compatible air, water, oil, lubrication, and hydraulic fluid applications when the separately installed hose, fittings, and accessories meet the required ratings.
A direct gear drive transfers power from the air motor to the reel drum without a chain, providing smooth and controlled hose retrieval. The low-profile outlet riser and open drum slot help the 3/4" hose form an orderly wrap while reducing sharp bends near the connection point. Permanently lubricated self-aligning pillow block bearings support consistent drum rotation, while an adjustable tension brake helps limit unwanted free-wheeling during payout. The welded steel A-frame provides a stable mounting platform for fixed and vehicle-mounted systems.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Rewind Method: Compressed Air Motor | Drive: Direct Gear Drive | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 175 ft | Max Pressure: 3,000 PSI | Swivel Inlet: 3/4" Female NPT | Outlet Riser: 3/4" Female NPT | Overall Dimensions: 29.38" W x 18.75" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base Dimensions: 23.38" X x 16" Y
Features:
- Compressed air motor provides powered hose retrieval where a compatible pneumatic supply is available.
- Direct gear drive supports smooth and quiet rewind without a chain-drive mechanism.
- One-piece, all-welded steel A-frame construction creates a rigid mounting platform for mobile and stationary installations.
- Machined solid brass 90° full-flow NPT swivel with nitrile seals supports efficient fluid transfer and serviceable seal replacement.
- Low-profile outlet riser and open drum slot promote a flat, non-crimping hose wrap during payout and retrieval.
- Permanently lubricated self-aligning bearings and an adjustable tension brake support smooth, controlled drum movement.
Made in USA: 
Applications:
- Industrial maintenance departments managing long air, water, oil, or compatible hydraulic hose assemblies.
- Mobile lubrication and fluid-service equipment equipped with a compressed-air supply.
- Fleet, construction, and agricultural service vehicles requiring powered hose retrieval.
- Manufacturing workstations supplying compatible fluids to machinery and production equipment.
- Equipment skids and service trailers requiring the reach and flow capacity of 175 feet of 3/4-inch hose.
FAQs:
- Q: Does the Coxreels 1125-5-175-A include hose?
A: No. This model is supplied as a reel only. Install a compatible 3/4-inch I.D. hose with an outside diameter no greater than 1-1/4 inches and suitable pressure, temperature, bend-radius, and media ratings. - Q: What does the 'A' suffix indicate?
A: The A suffix identifies the compressed air motor rewind configuration. The pneumatic motor powers the direct gear drive so the hose can be retrieved without manual cranking. - Q: How does this model differ from the 1125-5-100-A?
A: The 1125-5-175-A stores up to 175 feet of 3/4-inch hose, compared with 100 feet for the 1125-5-100-A. Its greater capacity increases the reel width and mounting footprint. - Q: Can this reel operate at the full 3,000 PSI rating?
A: Yes, provided the installed hose, fittings, connectors, and every other fluid-path component are rated for the intended working pressure. The complete system is limited by its lowest-rated component.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-175 | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175 | 4,500 | 50 | 8 |
| 1125-5-175-A | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-A | 4,500 | 50 | 8 |
| 1125-5-175-AB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-AB | 4,500 | 50 | 8 |
| 1125-5-175-C | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-C | 4,500 | 50 | 8 |
| 1125-5-175-E | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-E | 4,500 | 50 | 8 |
| 1125-5-175-EA | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EA | 4,500 | 50 | 8 |
| 1125-5-175-EB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EB | 4,500 | 50 | 8 |
| 1125-5-175-ED | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-ED | 4,500 | 50 | 8 |
| 1125-5-175-EF | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EF | 4,500 | 50 | 8 |
| 1125-5-175-H | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-H | 4,500 | 50 | 8 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
