When high-pressure hose needs long reach and controlled storage without a powered rewind system, the Coxreels HP1125-5-175-C gives maintenance teams a bevel geared crank reel in the HP1125 Series. This model is configured for 3/4" hose I.D. with 175 ft hose capacity, providing extended coverage for larger work areas while keeping hose neatly stored between uses. The 4500 PSI maximum pressure rating supports demanding high-pressure air, grease, hydraulic, washdown, spraying, or service applications when paired with properly rated hose, fittings, and system components.
The 'C' suffix identifies the front bevel geared crank configuration, which uses a mechanical gear-assisted crank to help retrieve longer hose runs more easily than a direct hand crank alone. Coxreels' HP1125 Series design combines a one-piece all welded steel 'A' frame base, low profile outlet riser, open drum slot, and external 90° full-flow swivel to support smooth hose wrap, reduced crimping, and straightforward mounting in shops, plants, service vehicles, and maintenance areas.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Hand Crank Hose Reel | Brand: Coxreels | Series: HP1125 Series | Model: HP1125-5-175-C | Rewind Type: Bevel Geared Crank | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 175 ft | Max Pressure: 4500 PSI | Inlet Swivel / Outlet Riser: 3/4" F NPT | Swivel: Electroless Nickel Plated Steel 90° Full-Flow NPT Swivel Inlet | Swivel Seals: AFLAS | Hose Included: No | Ship Weight: 50 lbs | Overall Dimensions: 32.75" W x 18.75" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base: 23.38" X x 15.38" Y
Features:
- Front bevel geared crank provides mechanical retraction for easier hose retrieval on longer hose runs.
- One-piece all welded steel 'A' frame base provides a rigid mounting structure with the mounting pattern located directly in the steel base.
- Low profile outlet riser and open drum slot design help produce a flat, smooth hose wrap while reducing the risk of hose crimping.
- External 90° full-flow NPT swivel with electroless nickel plated steel inlet supports high-pressure fluid routing through the reel.
- AFLAS swivel seals are used for the high-pressure HP Series swivel sealing system.
- Permanently lubricated self-aligning pillow block bearings support smooth reel rotation during pull-out and rewind.
- Long-handled locking pin secures the reel from rotation during transport or storage.
- Adjustable tension brake helps prevent free-wheeling, giving the user better control over drum movement.
- CPC powder coat finish helps resist chips and rust in shop, plant, and service environments.
Made in USA: 
Applications:
- Industrial maintenance and MRO: Managing long high-pressure hose runs for service points, machinery upkeep, and plant repair tasks.
- Fleet and equipment service: Storing 3/4" hose for trucks, trailers, construction equipment, and maintenance bays where extended reach is required.
- Hydraulic and grease service areas: Supporting compatible high-pressure hose storage when the installed hose and fittings match the system requirements.
- Pressure wash and washdown stations: Keeping hose organized in fixed work areas where controlled hand rewind is preferred over powered retrieval.
- Spraying and fluid transfer setups: Providing a mounted reel platform for applications that require long hose capacity and high-pressure compatibility.
FAQs:
- Q: What does 'less hose' mean for the HP1125-5-175-C?
A: It means this SKU is supplied as the reel only, without hose installed. The buyer must select compatible 3/4" I.D. hose separately and verify that the hose, fittings, and working pressure match the application. - Q: What does the 'C' suffix mean on this Coxreels model?
A: The 'C' suffix identifies the bevel geared crank version. A bevel geared crank uses gearing to assist manual retraction, which is helpful when winding longer or heavier hose runs. - Q: Is this a motor rewind reel?
A: No. This model uses a manual bevel geared crank, not an electric, hydraulic, or air motor rewind. It is a good fit where manual control is preferred and utility power is not needed at the reel location. - Q: Can this reel be used for compressed air service?
A: Yes, when the installed hose, fittings, and system pressure are compatible with the reel's 3/4" hose size and 4500 PSI maximum pressure rating. Always confirm the full system rating before installation. - Q: What mounting dimensions should be checked before ordering?
A: Confirm the available mounting space against the 32.75" W x 18.75" H x 17.63" L overall dimensions and the 21.44" M x 10" N mounting pattern. This helps prevent fit issues on benches, skids, service trucks, or fixed structures.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-175 | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175 | 4,500 | 50 | 8 |
| 1125-5-175-A | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-A | 4,500 | 50 | 8 |
| 1125-5-175-AB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-AB | 4,500 | 50 | 8 |
| 1125-5-175-C | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-C | 4,500 | 50 | 8 |
| 1125-5-175-E | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-E | 4,500 | 50 | 8 |
| 1125-5-175-EA | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EA | 4,500 | 50 | 8 |
| 1125-5-175-EB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EB | 4,500 | 50 | 8 |
| 1125-5-175-ED | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-ED | 4,500 | 50 | 8 |
| 1125-5-175-EF | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EF | 4,500 | 50 | 8 |
| 1125-5-175-H | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-H | 4,500 | 50 | 8 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
