Coxreels HP1125-5-250-EF Electric 24V DC 1/3 HP Motor Rewind Hose Reel | HP1125 Series | 3/4" Hose Diameter | 250' Hose Length | 4500 Max PSI | Less Hose

For 24V DC vehicles and equipment managing high-pressure hose at moderate cycle counts hydraulic service lines, 4500 PSI washdown supply, and fluid drops on agricultural tractors, medium-duty trucks, and dual-battery utility rigs the Coxreels HP1125-5-250-EF delivers hands-free automatic retraction from the HP1125 high-pressure platform without the added weight and cost of the 1/2 HP -EB motor. The 24V DC 1/3 HP motor (the same horsepower class as the standard 12V -E model, rewired for 24V electrical systems common on medium-duty commercial vehicles and large agricultural equipment) drives quiet, chain-free direct gear-drive retraction from the vehicle's existing 24V supply with no shop air needed. The drum holds 250 feet of 3/4-inch I.D. hose at up to 4500 PSI and 250°F, rated for hydraulic fluid, compressed air, water, and oil service. The electroless nickel plated steel swivel with AFLAS seals (a fluoroelastomer compound that resists hydraulic oil, fuel, and aggressive chemical exposure beyond the limits of standard nitrile) steps up from the brass/nitrile swivel on the 3,000 PSI standard 1125-5-250-EF. Built on the CNC robotically welded 12-gauge steel "A" frame common to the 1125 family. Made in the USA, backed by a 2-year warranty.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.

Type: Electric Motor Rewind Hose Reel | Series: HP1125 (High Pressure) | Motor: 24V DC, 1/3 HP | Drive: Direct Gear (No Chain) | Hose I.D. (in.): 3/4 | Hose O.D. (in.): 1-1/4 | Hose Capacity (ft.): 250 | Hose Included: No | Max PSI: 4500 | Max Temperature (°F): 250 | Inlet Swivel: 3/4 in. F NPT | Swivel Material: Electroless Nickel Plated Steel | Swivel Seals: AFLAS | Width (in.): 42.75 | Height (in.): 18.75 | Length (in.): 17.63

Features:

• 4500 PSI working pressure rating HP-series drum and swivel rated for hydraulic fluid service and high-pressure lines beyond the 3,000 PSI standard 1125 limit
• 24V DC 1/3 HP electric motor provides automatic hands-free retraction on 24V vehicle and facility electrical systems no air supply required
• Lighter motor assembly than the 1/2 HP -EB right-sized for moderate hose loads and lower-cycle installations where the heavier motor adds unnecessary cost and weight
• Reliable direct gear drive for quiet, chain-free retraction no chain to adjust, skip, or replace
• Electroless nickel plated steel 90° full-flow NPT swivel with AFLAS seals chemical and temperature-resistant fluoroelastomer seals suited to hydraulic oil, fuel, and aggressive fluid exposure
• Adjustable tension brake prevents free-wheeling during hose deployment for controlled line management
• Exclusive low profile outlet riser and open drum slot design provides non-crimping, flat smooth hose wrap to protect high-pressure hose and extend service life
• One-piece CNC robotically welded 12-gauge steel "A" frame base (not bolted) with integrated mounting pattern for permanent or mobile installation
• CPC powder coat finish chip resistant and rust inhibiting for shop, field, and mobile environments

Made in USA:

2 Year Warranty

Applications:

• Medium-duty service trucks & utility vehicles moderate-cycle high-pressure hose retraction on 24V vehicles where the full torque of the 1/2 HP -EB motor is more than the application requires
• Agricultural & rural equipment service hydraulic fluid and high-pressure service drops on large tractors, combines, and farm equipment running 24V battery systems in areas without facility power
• Hydraulic fluid service on 24V equipment hands-free retraction on hydraulic oil lines and test hoses at full pump pressure on 24V mobile machinery and service vehicles
• Municipal & fleet maintenance fixed 24V DC-powered 4500 PSI service drops in fleet yards and public works facilities where 24V is the vehicle electrical standard
• High-pressure washdown on 24V vehicles electric retraction on supply lines above 3,000 PSI on vehicles where 24V power is available and moderate cycle counts keep the 1/3 HP motor well within its duty range

FAQs:

• Q: What is the difference between the HP1125-5-250-EF (24V 1/3 HP) and the HP1125-5-250-EB (24V 1/2 HP)?
  A: Same 24V voltage, different motor output. The -EB delivers more retraction torque at 1/2 HP suited to long, heavily loaded hose runs and high-cycle fixed stations. The -EF's 1/3 HP motor handles moderate loads and lower cycle counts at lower cost and weight. Both run on the same 4500 PSI HP1125 platform.
• Q: What is the difference between the HP1125-5-250-EF and the standard 1125-5-250-EF?
  A: Same 24V DC 1/3 HP motor, but the HP1125 is rated to 4500 PSI vs 3,000 PSI, and uses an electroless nickel plated steel swivel with AFLAS seals instead of the brass/nitrile swivel. Choose the HP version for hydraulic fluid and high-pressure service; the standard 1125-5-250-EF handles air, water, and oil to 3,000 PSI.
• Q: Does this reel come with hose?
  A: No sold less hose. The drum holds up to 250 feet of 3/4-inch I.D. (1-1/4-inch O.D. max) hose rated to 4500 PSI, or up to 500 feet of 1/2-inch I.D. hose with a reducer.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com