Coxreels HP1125-5-250-EB Electric 24V DC 1/2 HP Motor Rewind Hose Reel | HP1125 Series | 3/4" Hose Diameter | 250' Hose Length | 4500 Max PSI | Less Hose

For medium and heavy-duty service trucks with 24V DC electrical systems that manage high-pressure hose hydraulic service lines, 4500 PSI washdown supply, and demanding fluid transfer on commercial vehicles the Coxreels HP1125-5-250-EB combines the HP1125 high-pressure platform with a 24V DC 1/2 HP motor (higher torque output than the 1/3 HP -EF model on the same 24V circuit, delivering more retraction force for fully loaded 250-foot runs of 3/4-inch hose that resist rewinding under their own weight). Wires directly to the vehicle's 24V electrical system with no shop air supply needed, and the direct gear-drive retraction runs quiet with no chain. The drum holds 250 feet of 3/4-inch I.D. hose at up to 4500 PSI and 250°F, rated for hydraulic fluid, compressed air, water, and oil service. The electroless nickel plated steel swivel with AFLAS seals (a fluoroelastomer compound that resists hydraulic oil, fuel, and aggressive chemical exposure beyond the limits of standard nitrile) distinguishes the HP1125 from the brass/nitrile swivel on the 3,000 PSI standard 1125-5-250-EB. Built on the CNC robotically welded 12-gauge steel "A" frame common to the 1125 family. Made in the USA, backed by a 2-year warranty.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.

Type: Electric Motor Rewind Hose Reel | Series: HP1125 (High Pressure) | Motor: 24V DC, 1/2 HP | Drive: Direct Gear (No Chain) | Hose I.D. (in.): 3/4 | Hose O.D. (in.): 1-1/4 | Hose Capacity (ft.): 250 | Hose Included: No | Max PSI: 4500 | Max Temperature (°F): 250 | Inlet Swivel: 3/4 in. F NPT | Swivel Material: Electroless Nickel Plated Steel | Swivel Seals: AFLAS | Width (in.): 42.75 | Height (in.): 18.75 | Length (in.): 17.63

Features:

• 4500 PSI working pressure rating HP-series drum and swivel rated for hydraulic fluid service and high-pressure lines beyond the 3,000 PSI standard 1125 limit
• 24V DC 1/2 HP electric motor provides automatic hands-free retraction from vehicle or facility 24V systems greater torque than the 1/3 HP -EF motor on the same voltage, no air supply required
• Reliable direct gear drive for quiet, chain-free retraction no chain to adjust, skip, or replace
• Electroless nickel plated steel 90° full-flow NPT swivel with AFLAS seals chemical and temperature-resistant fluoroelastomer seals suited to hydraulic oil, fuel, and aggressive fluid exposure
• Adjustable tension brake prevents free-wheeling during hose deployment for controlled line management
• Exclusive low profile outlet riser and open drum slot design provides non-crimping, flat smooth hose wrap to protect high-pressure hose and extend service life
• One-piece CNC robotically welded 12-gauge steel "A" frame base (not bolted) with integrated mounting pattern for permanent or mobile installation
• Heavy duty CNC robotically spun and ribbed discs with rolled edges for structural strength, hose protection, and operator safety
• CPC powder coat finish chip resistant and rust inhibiting for shop, field, and mobile environments

Made in USA:

2 Year Warranty

Applications:

• Heavy-duty service trucks & commercial vehicles high-pressure hose retraction on boom trucks, lube trucks, hydraulic service vehicles, and utility rigs running 24V DC dual-battery electrical systems
• Hydraulic fluid service & maintenance automatic retraction on hydraulic oil lines, test hoses, and charge lines at full pump pressure on industrial machinery and mobile equipment
• High-pressure washdown on 24V vehicles electric retraction on supply lines above 3,000 PSI on vehicles where 24V power is available but shop air is not
• Municipal & fleet maintenance fixed or truck-mounted 4500 PSI service drops in fleet yards where 24V DC is the vehicle electrical standard
• Agricultural & rural equipment service high-pressure hose management on large tractors and combines with 24V battery systems operating in areas without facility power

FAQs:

• Q: What is the difference between the HP1125-5-250-EB (24V 1/2 HP) and the HP1125-5-250-EF (24V 1/3 HP)?
  A: Both run on 24V DC, but the -EB delivers more retraction torque with its 1/2 HP motor the right choice for long, fully loaded hose runs and high-cycle installations. The -EF's 1/3 HP motor suits lighter loads and lower cycle counts where the extra weight and cost of the -EB aren't warranted.
• Q: What is the difference between the HP1125-5-250-EB and the standard 1125-5-250-EB?
  A: Same 24V DC 1/2 HP motor, but the HP1125 is rated to 4500 PSI vs 3,000 PSI, and uses an electroless nickel plated steel swivel with AFLAS seals instead of the brass/nitrile swivel. Choose the HP version for hydraulic fluid and high-pressure service; the standard 1125-5-250-EB handles air, water, and oil to 3,000 PSI.
• Q: Does this reel come with hose?
  A: No sold less hose. The drum holds up to 250 feet of 3/4-inch I.D. (1-1/4-inch O.D. max) hose rated to 4500 PSI, or up to 500 feet of 1/2-inch I.D. hose with a reducer.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com