When a high-pressure hose run needs powered retrieval instead of manual cranking, the Coxreels HP1125-4-450-EB provides a motorized reel platform for long hose capacity, mobile service rigs, washdown areas, pressure systems, and plant utility stations. This HP1125 Series reel is configured with an electric 24V DC 1/2 HP motor rewind, giving buyers powered retraction for a 1/2" hose I.D. and up to 450 ft hose capacity. Its 5000 PSI maximum pressure rating supports high-pressure fluid handling applications where lower-pressure air and water reels are not appropriate, while the open drum slot and low-profile outlet riser help guide hose onto the drum in a flatter, less-crimped wrap.
Built around Coxreels' welded steel 'A' frame construction, the HP1125-4-450-EB gives maintenance crews and equipment builders a rigid base for fixed mounting on shop floors, skids, service trucks, trailers, and equipment packages. The 24V DC motor configuration is useful where battery or vehicle electrical systems are available, and the direct gear drive rewind eliminates chain-driven retraction components for smoother powered hose retrieval.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: HP1125 Series | Model: HP1125-4-450-EB | Configuration: Less Hose | Motor: Electric 24V DC 1/2 HP | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 450 ft | Max Pressure: 5000 PSI | Ship Weight: 78 lbs | Overall Dimensions: 37.75" W x 19.25" H x 17.63" L | Mounting Pattern: 27.44" M x 10" N | Base: 29.38" X x 16" Y
Features:
- Electric 24V DC 1/2 HP motor rewind supports powered hose retrieval where manual hand-crank operation is not preferred.
- Direct gear drive retraction provides quiet, smooth motor-driven rotation without a chain drive.
- All-welded steel 'A' frame construction creates a rigid reel structure for fixed mounting in shops, trucks, skids, and plant utility areas.
- Exclusive low-profile outlet riser and open drum slot design help support a flat, smooth hose wrap and reduce hose crimping during rewind.
- External fluid path with electroless nickel-plated steel 90° full-flow NPT swivel inlet supports high-pressure fluid transfer through the reel.
- AFLAS swivel seals are used on the HP1125 Series high-pressure configuration.
- Permanently lubricated, self-aligning pillow block bearings promote smooth drum rotation during payout and rewind.
- Adjustable tension brake helps prevent free-wheeling during operation.
Made in USA: 
Applications:
- Pressure washing and washdown systems where long hose reach and high-pressure rating are required.
- Mobile service trucks and trailer-mounted equipment using 24V DC electrical systems for powered hose rewind.
- Industrial maintenance areas that need controlled storage for long 1/2" high-pressure hose runs.
- Hydraulic, grease, lubrication, and fluid transfer setups when the hose, fittings, and media are compatible with the reel rating.
- Spraying, jetting, and equipment service applications where hose organization helps reduce floor clutter and handling time.
FAQs:
- Q: What does 'less hose' mean on this Coxreels HP1125-4-450-EB?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/2" I.D. hose separately and confirm the hose pressure rating, outside diameter, fittings, and media compatibility before installation. - Q: Is this a spring rewind reel?
A: No. This model uses an electric 24V DC 1/2 HP motor rewind. Motor rewind is useful when long hose lengths are difficult or time-consuming to retrieve by hand. - Q: Can this reel handle 5000 PSI service?
A: Yes, this HP1125 Series model is rated for up to 5000 PSI. The installed hose, fittings, and system components must also be rated for the same working pressure or higher. - Q: What type of power does the EB motor option use?
A: The EB configuration is listed as an electric 24V DC motor rewind. This makes it a practical fit for vehicle, battery, and equipment-mounted systems where 24V DC power is available. - Q: Where should this reel be mounted?
A: The reel should be mounted to a stable surface that supports the reel weight, hose weight, and pull forces during use. Use the published 27.44" x 10" mounting pattern and 29.38" x 16" base dimensions when planning the installation.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-450 | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450 | 5,000 | 52 | 4 |
| 1125-4-450-A | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-A | 5,000 | 52 | 4 |
| 1125-4-450-AB | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-AB | 5,000 | 52 | 4 |
| 1125-4-450-C | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-C | 5,000 | 52 | 4 |
| 1125-4-450-E | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-E | 5,000 | 52 | 4 |
| 1125-4-450-EA | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-EA | 5,000 | 52 | 4 |
| 1125-4-450-EB | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-EB | 5,000 | 52 | 4 |
| 1125-4-450-ED | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-ED | 5,000 | 52 | 4 |
| 1125-4-450-EF | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-EF | 5,000 | 52 | 4 |
| 1125-4-450-H | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-H | 5,000 | 52 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
