For long high-pressure hose runs that need powered rewind from an air supply, the Coxreels HP1125-4-450-AB combines HP1125 Series reel construction with a #6 Gast compressed air motor rewind. This reel is sized for 1/2" I.D. hose with a 450 ft hose capacity and a 5000 PSI maximum pressure rating, making it a practical choice for facilities that need extended reach while keeping hose controlled, elevated, and properly stored after use.
The AB air motor rewind configuration helps retrieve hose without hand-cranking, which is especially useful when the hose length, working pressure, or installed location makes manual rewind less convenient. Coxreels' all-welded steel 'A' frame, electroless nickel plated steel 90° full-flow NPT swivel inlet, AFLAS swivel seals, and low profile outlet riser support high-pressure hose handling while helping the hose wrap flatter across the drum during rewind.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Motor Rewind Hose Reel | Series: HP1125 Series | Model: HP1125-4-450-AB | Configuration: Less Hose | Motor Type: #6 Gast Compressed Air Motor Rewind | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 450 ft | Max Pressure: 5000 PSI | Inlet Swivel & Outlet Riser: 1/2" F NPT | Ship Weight: 60 lbs
Features:
- #6 Gast compressed air motor rewind helps power hose retrieval where an air-powered rewind system is preferred over electric or manual rewind.
- Reliable direct gear drive on motor driven models provides quiet, smooth retraction without a chain drive.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure flow through the reel connection.
- AFLAS swivel seals are used on HP prefix high-pressure models for demanding pressure service.
- All welded steel 'A' frame construction provides a rigid reel structure for fixed mounting on floors, benches, skids, trucks, or service equipment.
- Exclusive low profile outlet riser and open drum slot design help create a flat, smooth hose wrap and reduce hose crimping during rewind.
- Permanently lubricated self-aligning pillow block bearings support smooth drum rotation with less routine service attention.
- Adjustable tension brake helps prevent free-wheeling during hose payout and rewind.
- Rolled edges and ribbed discs add strength while helping protect the hose as it is pulled out and retracted.
- Chip resistant and rust inhibiting CPC powder coat finish helps protect the reel frame in shop and field environments.
Made in USA: 
Applications:
- Compressed air service areas where long hose reach is needed from a fixed reel location.
- Plant maintenance and MRO departments that need powered rewind to keep high-pressure hose off floors and walkways.
- Fleet, construction, agricultural, and equipment service operations using longer hose runs around vehicles, machinery, or jobsite equipment.
- Pressure washing, washdown, spraying operations, and other compatible high-pressure services when hose, fittings, seals, and media match the application.
- Mobile service skids and truck-mounted systems where compressed air is available to power the rewind motor.
FAQs:
- Q: What does 'less hose' mean for the HP1125-4-450-AB?
A: It means this SKU is supplied as the reel only, without hose installed. A compatible 1/2" I.D. hose must be purchased separately and matched to the pressure, media, fitting, and outside diameter requirements of the reel. - Q: What is the difference between the A and AB versions?
A: Both are air motor rewind versions in this HP1125 configuration. The AB version is identified as using a #6 Gast compressed air motor rewind, while the A version is identified as a #4 Gast compressed air motor rewind. - Q: Can this reel be used for compressed air?
A: Yes, this product title identifies compressed air service, and the reel is suitable when the hose assembly and system components are selected for the actual air pressure and operating conditions. The reel rating does not replace the need to use a properly rated hose. - Q: Does the 5000 PSI rating mean any 1/2" hose will work?
A: No. The hose must be separately selected with a compatible pressure rating, outside diameter, fitting type, and media compatibility. Since this reel is sold less hose, those hose details must be confirmed before installation. - Q: What should be checked before ordering this reel?
A: Confirm the 35" overall width, 18.75" overall height, 17.63" overall length, mounting pattern, 1/2" F NPT inlet and outlet riser, hose outside diameter, and available compressed air supply for the rewind motor.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-450 | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450 | 5,000 | 52 | 4 |
| 1125-4-450-A | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-A | 5,000 | 52 | 4 |
| 1125-4-450-AB | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-AB | 5,000 | 52 | 4 |
| 1125-4-450-C | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-C | 5,000 | 52 | 4 |
| 1125-4-450-E | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-E | 5,000 | 52 | 4 |
| 1125-4-450-EA | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-EA | 5,000 | 52 | 4 |
| 1125-4-450-EB | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-EB | 5,000 | 52 | 4 |
| 1125-4-450-ED | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-ED | 5,000 | 52 | 4 |
| 1125-4-450-EF | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-EF | 5,000 | 52 | 4 |
| 1125-4-450-H | 1/2" | 7/8" | 450 | 3/8" | 3/4" | 625 | 1/2" F NPT | 3,000 | HP1125-4-450-H | 5,000 | 52 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
