Coxreels HP1125-4-450-C Bevel Geared Crank Hose Reel | HP1125 Series | 1/2" Hose Diameter | 450' Hose Length | 5000 Max PSI | Less Hose

For high-pressure hose storage where simple manual rewind is preferred, the Coxreels HP1125-4-450-C provides a bevel geared crank reel configuration for long hose runs in shop, plant, fleet, and service environments. This HP1125 Series reel is sized for 1/2" I.D. hose with a 450 ft hose capacity and a 5000 PSI maximum pressure rating, giving buyers the reach needed for larger work areas while keeping hose organized and off the floor between uses.

The 'C' suffix identifies the front bevel geared crank configuration, which uses mechanical gearing to make hose retrieval more controlled than a basic direct crank on long or heavier hose installations. Coxreels' one-piece all-welded steel 'A' frame, electroless nickel plated steel 90° full-flow NPT swivel inlet, AFLAS swivel seals, low profile outlet riser, and open drum slot support high-pressure hose handling while helping the hose wrap flat and smooth across the drum.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.

Type: Bevel Geared Crank Hose Reel | Series: HP1125 Series | Model: HP1125-4-450-C | Configuration: Less Hose | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 450 ft | Max Pressure: 5000 PSI | Inlet Swivel & Outlet Riser: 1/2" F NPT | Ship Weight: 52 lbs

Features:

• Front bevel geared crank supports controlled mechanical retraction for long high-pressure hose runs.
• External 90° full-flow NPT swivel with electroless nickel plated steel inlet supports high-pressure flow through the reel connection.
• AFLAS swivel seals are used on HP prefix high-pressure models for demanding pressure service.
• Exclusive low profile outlet riser and open drum slot design help create a flat, smooth hose wrap and reduce hose crimping during rewind.
• Permanently lubricated self-aligning pillow block bearings support smooth drum rotation with less routine bearing attention.
• Long-handled locking pin secures the reel from rotation during transport or storage.
• One-piece all CNC robotically welded 12 gauge steel 'A' frame base provides a rigid mounting structure without a bolted frame connection.
• CNC robotically spun and ribbed discs with rolled edges add strength, hose protection, and safer handling around the reel edges.
• Adjustable tension brake helps prevent free-wheeling when hose is being paid out or retrieved.
• Long lasting, chip resistant, and rust inhibiting CPC powder coat finish helps protect the reel frame in working environments.

Made in USA:

2 Year Warranty

Applications:

• Compressed air service areas where a long 1/2" hose run must be stored neatly after use.
• Industrial maintenance and MRO departments managing high-pressure hose across larger plant work zones.
• Fleet, agricultural, and equipment service shops where hose reach is needed around vehicles, machinery, and service bays.
• Pressure washing, washdown, spraying operations, and other compatible high-pressure services when the hose, fittings, seals, and media match the application.
• Skid, bench, floor, or truck-mounted installations where a manual crank reel is preferred over air or electric rewind.

FAQs:

• Q: What does 'less hose' mean on the HP1125-4-450-C?
  A: It means the reel is supplied without hose installed. A compatible 1/2" I.D. hose must be purchased separately and matched to the reel’s capacity, pressure rating, fitting size, outside diameter, and intended media.
• Q: What does the 'C' suffix mean?
  A: The 'C' suffix identifies the bevel geared crank version. This configuration uses a front crank with mechanical gearing to help retrieve long hose runs in a controlled manual rewind setup.
• Q: Can this reel be used for compressed air service?
  A: Yes, when the complete hose assembly and system components are properly selected for the air pressure and operating conditions. The reel is rated to 5000 PSI, but the separately purchased hose must also be rated for the working pressure in use.
• Q: Does this model include the inlet or outlet hose?
  A: No hose is included with this less-hose configuration. The buyer must provide the main hose and confirm the required connection details, including the 1/2" F NPT inlet swivel and outlet riser.
• Q: What should be checked before mounting this reel?
  A: Confirm the available space, mounting surface strength, hose bend clearance, hose outside diameter, and mounting pattern. This model measures 37.5" wide, 18.75" high, and 17.63" long, with a 27.44" x 10" mounting pattern.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com