Ingersoll Rand QS1T10S1D Inline Air Screwdriver | 1,000 RPM | 2.7 - 39.8 (In-lbs) Torque Range | Adjustable Shut-Off Clutch

For repetitive assembly operations that require controlled fastener engagement and more torque capability than higher-speed QS1T configurations, the Ingersoll Rand QS1T10S1D Inline Air Screwdriver combines 1,000 RPM free speed with a 2.7 to 39.8 in-lb torque range and an adjustable shut-off clutch. The inline body maintains direct alignment with the fastener axis for straight-access production work, while the clutch automatically stops the fastening cycle when the preset torque setting is reached, supporting controlled tightening across repeated assembly tasks.

The Ingersoll Rand QS1T10S1D provides a lower rundown speed and higher maximum torque capability than the supplied 1,500 RPM and 2,000 RPM QS1T models. Its 1,000 RPM operation suits compatible joints where controlled fastener approach and increased turning force are more important than maximum cycle speed. The adjustable clutch allows tool output to be matched to the fastening requirements within the specified range, with final torque verified on the actual production joint after changes to the clutch setting, fastener, bit, component material, or air-supply conditions.

Type: Inline Air Screwdriver | Model: QS1T10S1D | Configuration: Inline | Free Speed: 1,000 RPM | Torque Range: 2.7 - 39.8 in-lbs | Clutch Type: Adjustable Shut-Off

Features: 1,000 RPM free speed supports controlled fastener rundown during repetitive pneumatic assembly cycles. 2.7 to 39.8 in-lb torque range provides adjustable output for compatible fastening applications. Adjustable shut-off clutch automatically stops the fastening cycle when the preset torque setting is reached. Inline configuration keeps the screwdriver aligned with the fastener axis for straight-access production positions. Lower-speed setup provides greater maximum torque capability than the supplied 1,500 RPM and 2,000 RPM QS1T configurations. Automatic shut-off helps limit overtightening when the clutch is properly adjusted and validated on the actual production joint. Pneumatic operation supports repeated fastening at workstations supplied with clean, regulated compressed air. Made in USA:

Applications:

• Appliance manufacturing — tightening compatible fasteners in housings, frames, panels, brackets, and mechanical subassemblies.
• Electrical equipment production — installing screws in cabinets, enclosures, control assemblies, terminals, and related components.
• Automotive component assembly — completing controlled fastening on interior, electrical, trim, and light mechanical assemblies.
• General manufacturing — handling repetitive screwdriving where 1,000 RPM rundown and adjustable torque shut-off match the production joint.
• Assembly workstations — supporting repeated tightening cycles where increased torque capability and automatic cycle termination are preferred over maximum rundown speed.

FAQs:

• Q: What does the adjustable shut-off clutch do on the QS1T10S1D?
  A: The clutch automatically stops the screwdriver when the preset torque setting is reached. This supports controlled fastening and helps limit overtightening when the tool is properly adjusted and verified on the actual production joint.
• Q: What torque range does the Ingersoll Rand QS1T10S1D provide?
  A: The specified torque range is 2.7 to 39.8 in-lbs. Select the clutch setting according to the fastener, component material, joint condition, and assembly specification, then verify the fastening result using the required production quality-control method.
• Q: How does the QS1T10S1D compare with the QS1T15S1D?
  A: The QS1T10S1D operates at 1,000 RPM with a torque range of 2.7 to 39.8 in-lbs, while the QS1T15S1D operates at 1,500 RPM with a torque range of 2.7 to 27.4 in-lbs. The QS1T10S1D provides slower rundown with higher maximum torque capability.
• Q: When should I choose the 1,000 RPM QS1T10S1D instead of a faster QS1T screwdriver?
  A: The 1,000 RPM configuration suits compatible joints where greater maximum torque capability and more controlled fastener engagement are preferred over the shorter rundown times available from faster models.
• Q: Does automatic shut-off guarantee identical final torque on every fastener?
  A: No. Final torque can vary with air pressure, joint characteristics, fastener condition, bit fit, component material, and clutch adjustment. Validate results on the actual production assembly and recheck the fastening process whenever operating conditions change.

Looking for more information about Ingersoll Rand Screwdriver? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Screwdrivers for your assembly application, call (800) 608-5210 or email info@intlairtool.com