Ingersoll Rand QS1P10S1D Inline Pneumatic Screwdriver | 1,000 RPM | 2.7 - 39.8 (In-lbs) Torque Range | Push-to-Start

For controlled fastening applications that require higher torque capability and a measured rundown speed, the Ingersoll Rand QS1P10S1D Inline Pneumatic Screwdriver combines 1,000 RPM free speed with a 2.7 to 39.8 in-lb torque range and push-to-start operation. The inline configuration supports direct alignment with vertically or horizontally oriented fasteners. At the same time, push-to-start actuation begins the fastening cycle when axial pressure is applied to the bit, helping streamline repetitive assembly operations.

The Ingersoll Rand QS1P10S1D provides a lower-speed, higher-torque alternative to faster QS1 inline screwdriver configurations. Its 1,000 RPM speed supports controlled fastener rundown, while the adjustable torque range allows the tool to be matched to different joint requirements within its specified capability. Push-to-start operation eliminates the need to actuate a separate trigger during each cycle, making the tool well suited to production workstations where repeatable tool positioning and efficient cycle initiation are important.

Type: Inline Pneumatic Screwdriver | Model: QS1P10S1D | Configuration: Inline | Free Speed: 1,000 RPM | Torque Range: 2.7 - 39.8 in-lbs | Start Type: Push-to-Start

Features: 1,000 RPM free speed supports controlled fastener rundown in repetitive pneumatic assembly operations. 2.7 to 39.8 in-lb torque range provides adjustment capability for fastening applications within the tool's specified output range. Push-to-start actuation begins the fastening cycle when axial pressure is applied to the bit, eliminating the need to operate a separate trigger. Inline configuration keeps the tool body aligned with the fastener axis for direct access to straight-on assembly positions. Lower-speed configuration provides increased torque capability compared with the supplied 2,000 RPM QS1P20S1D model. Adjustable torque capability allows tool output to be matched to the fastener, joint condition, component material, and assembly requirements. Pneumatic operation supports repeated fastening cycles at production workstations supplied with properly conditioned compressed air. Made in USA:

Applications:

• Appliance manufacturing — fastening panels, brackets, housings, and subassemblies that require controlled torque within the specified range.
• Automotive component assembly — tightening compatible fasteners on production components and subassemblies where straight tool access is available.
• Electrical equipment assembly — installing fasteners in enclosures, cabinets, and assemblies that require controlled pneumatic screwdriving.
• General manufacturing — completing repetitive fastening tasks where a 1,000 RPM rundown speed and adjustable torque output suit the joint requirements.
• Production workstations — supporting repeated fastening cycles where push-to-start actuation can simplify operator workflow and cycle initiation.

FAQs:

• Q: What does push-to-start mean on the Ingersoll Rand QS1P10S1D?
  A: Push-to-start means the screwdriver begins operating when the bit is positioned on the fastener and axial pressure is applied. The operator does not need to actuate a separate trigger for each fastening cycle.
• Q: What torque range does the QS1P10S1D provide?
  A: The screwdriver has a specified torque range of 2.7 to 39.8 in-lbs. The appropriate setting should be selected according to the fastener, joint condition, component material, and assembly specification.
• Q: How does the QS1P10S1D differ from the QS1P20S1D?
  A: The QS1P10S1D operates at 1,000 RPM with a torque range of 2.7 to 39.8 in-lbs, while the QS1P20S1D operates at 2,000 RPM with a torque range of 2.7 to 22.1 in-lbs. The QS1P10S1D is the lower-speed option with the higher maximum torque capability.
• Q: Why choose an inline pneumatic screwdriver?
  A: An inline configuration keeps the tool body aligned with the fastener axis, making it useful for straight-access assembly positions where the operator can apply axial pressure directly to the fastener.
• Q: How should the final torque setting be verified?
  A: Adjust the screwdriver within its specified torque range according to the assembly requirements, then verify the resulting fastener torque on the actual production joint using the quality-control method required for the process.

Looking for more information about Ingersoll Rand Screwdriver? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Screwdrivers for your assembly application, call (800) 608-5210 or email info@intlairtool.com