Ingersoll Rand QS1P05S1D Inline Pneumatic Screwdriver | 500 RPM | 2.7 - 47.8 (In-lbs) Torque Range | Push-to-Start

For repetitive assembly operations that require controlled rundown speed and higher torque capability in a straight-access tool, the Ingersoll Rand QS1P05S1D Inline Pneumatic Screwdriver combines 500 RPM free speed with a 2.7 to 47.8 in-lb torque range and push-to-start operation. The inline configuration keeps the tool aligned with the fastener axis, while push-to-start actuation begins the fastening cycle when axial pressure is applied to the bit, helping simplify repeated screwdriving tasks at production workstations.

The Ingersoll Rand QS1P05S1D is the lower-speed, higher-torque option among the supplied QS1 push-to-start screwdriver models, making it suitable for compatible assembly joints that require more turning force than the faster configurations provide. Its 500 RPM speed supports controlled fastener rundown, while the adjustable torque capability allows output to be matched to different fastening requirements within the tool's specified range. Final torque should be verified on the actual production joint whenever tool settings, fasteners, materials, or air-supply conditions change.

Type: Inline Pneumatic Screwdriver | Model: QS1P05S1D | Configuration: Inline | Free Speed: 500 RPM | Torque Range: 2.7 - 47.8 in-lbs | Start Type: Push-to-Start

Features: 500 RPM free speed supports controlled fastener rundown in repetitive pneumatic assembly operations. 2.7 to 47.8 in-lb torque range provides adjustment capability for compatible fastening applications within the tool's specified output range. Push-to-start actuation begins the fastening cycle when axial pressure is applied to the bit, eliminating the need to operate a separate trigger. Inline configuration keeps the tool body aligned with the fastener axis for direct access to straight-on assembly positions. Lower-speed configuration provides higher maximum torque capability than the supplied 1,000 RPM and 2,000 RPM QS1 push-to-start models. Adjustable torque capability allows tool output to be matched to the fastener, joint condition, component material, and assembly requirements. Pneumatic operation supports repeated fastening cycles at production workstations supplied with properly conditioned compressed air. Made in USA:

Applications:

• Appliance manufacturing — tightening compatible fasteners in panels, frames, housings, brackets, and mechanical subassemblies.
• Automotive component assembly — completing controlled screwdriving operations on production parts and subassemblies with straight fastener access.
• Electrical equipment production — installing compatible fasteners in cabinets, enclosures, equipment assemblies, and related components.
• General manufacturing — handling repetitive fastening tasks where controlled rundown speed and adjustable torque are required.
• Production workstations — supporting repeated fastening cycles where push-to-start actuation simplifies cycle initiation and operator workflow.

FAQs:

• Q: What does push-to-start mean on the Ingersoll Rand QS1P05S1D?
  A: Push-to-start means the screwdriver begins operating when the bit is positioned on the fastener and axial pressure is applied. The operator does not need to actuate a separate trigger for each fastening cycle.
• Q: What torque range does the QS1P05S1D provide?
  A: The screwdriver has a specified torque range of 2.7 to 47.8 in-lbs. Select the setting according to the fastener, joint condition, component material, and assembly specification, then verify the result on the actual production joint.
• Q: How does the QS1P05S1D differ from the QS1P10S1D?
  A: The QS1P05S1D operates at 500 RPM with a maximum torque of 47.8 in-lbs, while the QS1P10S1D operates at 1,000 RPM with a maximum torque of 39.8 in-lbs. The QS1P05S1D is the slower-speed option with higher maximum torque capability.
• Q: Why choose an inline pneumatic screwdriver?
  A: The inline configuration keeps the tool body aligned with the fastener axis, making it useful for straight-access assembly positions where the operator can apply axial pressure directly to the fastener.
• Q: Does the selected tool setting guarantee final fastener torque?
  A: No. Final torque can vary with joint characteristics, fastener condition, component material, air supply, and other process variables. Verify fastening results on the actual production joint using the quality-control method required for the assembly process.

Looking for more information about Ingersoll Rand Screwdriver? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Screwdrivers for your assembly application, call (800) 608-5210 or email info@intlairtool.com